Catalytic enantioselective intermolecular cycloaddition of diazodiketoester-derived carbonyl ylides with indoles using chiral dirhodium(II) carboxylates

The first example of enantioselective intermolecular cycloaddition of carbonyl ylides with indoles is described. The cycloaddition of five- and six-membered carbonyl ylides derived from diazodiketoesters with N-methylindoles under catalysis by dirhodium(II) tetrakis[N-tetrachlorophthaloyl-(S)-tert-leucinate], Rh(2)(S-TCPTTL)(4), gave cycloadducts in high yields and with high levels of enantioselectivity (up to 99% ee) as well as excellent exo diastereoselectivity.     

High-throughput and simultaneous analysis of eight central-acting muscle relaxants in human plasma by ultra-performance liquid chromatography–tandem mass spectrometry in the positive and negative ionization modes

In this report, a high-throughput and sensitive method for analysis of eight central-acting muscle relaxants in human plasma by ultra-performance liquid chromatography–tandem mass spectrometry (UPLC-MS/MS) in the positive and negative ionization modes using tolbutamide as internal standard is presented. After pretreatment of a plasma sample by solid-phase extraction with an Oasis HLB cartridge, muscle relaxants were analyzed by UPLC with Acquity UPLC BEH C₁₈ column and Acquity TQD tandem quadrupole mass spectrometer equipped with an electrospray ionization interface. The calibration curves for muscle relaxants spiked into human plasma equally showed good linearities in the nanogram per milliliter order range. The detection limits (signal-to-noise ratio = 3) was as low as 0.1–2 ng/mL. The method gave satisfactory recovery rates, accuracy, and precision for quality control samples spiked with muscle relaxants. To further validate the present method, 250 mg of chlorphenesin carbamate was orally administered to a healthy male volunteer, and the concentrations of chlorphenesin carbamate in plasma were measured 0.5, 1, 2, 4, 6, and 8 h after dosing; their concentrations in human plasma were between 0.62 and 2.44 μg/mL. To our knowledge, this is the first report describing simultaneous analysis of over more than two central-acting muscle relaxants by liquid chromatography–tandem mass spectrometry. This has been realized by the capability of our instrument for simultaneous multiple reaction monitoring of the target compounds in both positive and negative ionization modes. Therefore, the present method seems very useful in forensic and clinical toxicology and pharmacokinetic studies.     

Ln-Co-based rock-salt-type porous coordination polymers: vapor response controlled by changing the lanthanide ion

We synthesized new porous coordination polymers (PCPs) {Ln(III)[Co(III)(dcbpy)(3)]·nH(2)O} (Ln = La(3+), Nd(3+), Gd(3+); H(2)dcbpy = 4,4'-dicarboxy-2,2'-bipyridine) and characterized them by X-ray diffraction and vapor-adsorption measurements. These three Ln-Co-based PCPs have similar rock-salt types and highly symmetrical porous structure and show a reversible structural collapse-regeneration accompanied by water-vapor desorption-adsorption. Similar structural regeneration was also observed for the Gd-Co PCP upon exposure to MeOH and CH(3)CN vapors, whereas the remaining two PCPs barely responded to organic vapors.     

Vesicle growth and deformation in a surfactant solution below the Krafft temperature

We have studied vesicle growth and deformation in aqueous solutions of nonionic surfactant C(16)E(7) below the Krafft temperature by means of an optical microscope. It has been found that vesicles become larger by fusing together, and that the growth rate is slower than that of the unilamellar vesicle or emulsion systems due to the multilamellar structures of shells in a vesicle. The deformation of the vesicles depends on the temperature quench depth, and we found the transformation from spherical vesicles to string-like domains at a certain quench-temperature. From the small angle X-ray scattering and confocal microscope experiments, it can be deduced that the deformation of vesicles would be induced by osmotic pressure due to the micellar concentration difference between inside and outside of vesicles.     

Fluorescence studies on phenylene moieties embedded in a framework of periodic mesoporous organosilica

The excited state characteristics of phenylene (Ph)-bridged periodic mesoporous organosilica (PMO) powders with crystal-like and amorphous wall structures are investigated. Crystal-like Ph-PMO has a molecular ordering of the bridging organic moieties with intervals of 0.76 and 0.44 nm parallel and perpendicular to the mesochannel direction, respectively, whereas amorphous Ph-PMO has no molecular-level periodicity in the wall. Fluorescence from the exciton and excimer of the Ph moieties and the defect center in the silicate network were detected at room temperature, but fluorescence from the excimer and the defect center were not detected at 77 K for crystal-like Ph-PMO dispersed in a methanol/ethanol mixed solvent. The decay curve of the exciton fluorescence of crystal-like Ph-PMO at room temperature was analyzed successfully using a one-dimensional diffusion model quenched by the defect center and the excimer site. The results were discussed in comparison with those for the crystal-like biphenylene-bridged PMO reported in the preceding paper (Yamanaka et al., Phys. Chem. Chem. Phys., 2010, 12, 11688-11696). The existence of excited states with various conformations including ground state dimers or aggregates of the Ph moieties was suggested for amorphous Ph-PMO. It was clearly apparent that the differences in the excited state dynamics reflected the differences in the molecular-level structure in the wall.     

Nanophotonic droplet: a nanometric optical device consisting of size- and number-selective coupled quantum dots

Although recent advances in fabrication technologies have allowed the realization of highly accurate nanometric devices and systems, most approaches still lack uniformity and mass-production capability sufficient for practical use. We have previously demonstrated a novel technique for autonomously coupling heterogeneous quantum dots to induce particular optical responses based on a simple phonon-assisted photocuring method in which a mixture of quantum dots and photocurable polymer is irradiated with light. The cured polymer sequentially encapsulates coupled quantum dots, forming what we call a nanophotonic droplet. Recently, we found that each quantum dot in the mixture is preferably coupled with other quantum dots of similar size due to a size resonance effect of the optical near-field interactions between them. Moreover, every nanophotonic droplet is likely to contain the same number of coupled quantum dots. In this paper, we describe the basic mechanisms of autonomously fabricating nanophotonic droplets, and we examine the size- and number-selectivity of the quantum dots during their coupling process. The results from experiments show the uniformity of the optical properties of mass-produced nanophotonic droplets, revealed by emission from the contained coupled quantum dots, due to the fundamental characteristics of our method.     

Experimental demonstration and stochastic modeling of autonomous formation of nanophotonic droplets

We have previously demonstrated a novel technique for autonomously forming a nanophotonic droplet, which is micro-scale spherical polymer structure that contains paired heterogeneous nanometric components. The sort-selectivity and alignment accuracy of the nanometric components in each nanophotonic droplet, and the related homogeneity of the optical function, are due to a characteristic pairing process based on a phonon-assisted photo-curing method. The proposed method requires irradiating a mixture of components with light to induce optical near-field interactions between each component, and subsequent processes based on these interactions. The pairing yield of components via the interactions is considered to mainly depend on the frequency of their encounters and the size-resonance effect between encountered components. In this paper, we model these two factors by individual stochastic procedures and construct a numerical model to describe the pairing process. Agreement between the results of numerical and experimental demonstrations shows the validity of our stochastic modeling.     

Cadmium recovery by a sulfate-reducing magnetotactic bacterium,Desulfovibrio magneticus RS-1, using magnetic separation

Cadmium recovery by a sulfate-reducing magnetotactic bacterium, Desulfovibrio magneticus strain RS-1, was investigated. D. magneticus precipitated >95% of cadmium at an initial concentration of 1.3 ppm in the growth medium. Electron microscopic analysis revealed that D. magneticus formed electron-dense particles on its surface when cultivated in the presence of cadmium ions (Cd²⁺). Sulfide was also found in the precipitate, and the composition ratio of sulfide/cadmium was 0.7. Sixty percent of viable RS-1 cells was recovered by a simple magnetic separation revealing the removal of 58% cadmium from the culture medium.     

Determination of elemental and ionic compositions for diesel exhaust particles by particle induced X-ray emission and ion chromatography analysis.

The purpose of this study is to clarify the chemical characterization of PM2.5 and PM10 in diesel exhaust particles (DEP). Sampling of PM2.5 and PM10 in DEP was carried out in November 1999 using an automobile exhaust testing system at the National Traffic Safety and Environment Laboratory, with a diesel truck (engine type: direct injection, displacement: 7,961 cc, carrying weight: 2,020 kg, equivalent inertia weight: 5,600 kg) placed on a chassis dynamometer. Sampling conditions included idling, constant speed of 40 km/h, M-15 test pattern and 60%-revolution/40%-load of maximum power. Samples were collected on a polycarbonate membrane filter (Nuclepore, pore size: 0.8 microm) using a MiniVol Portable Air Sampler (Airmetrics Co., Inc.). The concentrations of several elemental and ionic species in the PM2.5 and PM10 samples were determined by particle induced X-ray emission (PIXE) and ion chromatography analysis. PIXE analysis of the PM2.5 and PM10 samples revealed 15 elements, of which Na, Mg, Si, S, Cl, Ca, Fe and Zn were found to be the major components. Ionic species were Cl-, NO2-, NO3-, SO4(2-), Na+, NH4+, K+ and Ca2+. Concentrations of elements and ionic species under the sampling condition of 60%-revolution/40%-load were highest in comparison with those of the other sampling conditions. The elemental and ionic species data were compared for PM2.5 and PM10; PM2.5 concentrations were 70% or more of PM10 concentrations for the majority of elements, and concentrations of ionic species in PM2.5 and PM10 were almost identical.