Synthesis and antinociceptive activity of orally active opioid peptides: improvement of oral bioavailability by esterification

To improve the oral bioavailability of a dermorphin tetrapeptide analog, N(alpha)-1-iminoethyl-Tyr-D-MetO-Phe-MebetaAla-OH (III), which has a potent analgesic activity after oral administration, various derivatives were synthesized to increase lipophilicity by esterification of the C-terminal carboxyl group and/or acylation of the phenolic hydroxyl group on Tyr1. Antinociceptive activity was evaluated after subcutaneous or oral administration using the mouse tail pressure test. As a result, increased antinociceptive activity after oral administration as well as an improved ED50(p.o.)/ED50(s.c.) ratio, which is an indicator of oral bioavailability, were found for some compounds. With regard to the improvement of bioavailability, derivatives with acylation of the phenolic hydroxyl group on Tyr1 showed better results than derivatives with esterification of the C-terminal carboxyl group. In particular, an ED50(p.o.)/ED50(s.c.) ratio equivalent to that of morphine was found for an acetylated derivative, N(alpha)-1-iminoethyl-Tyr(COMe)-D-MetO-Phe-MebetaAla-OH (7a), as well as for a methoxycarbonylated derivative, N(alpha)-1-iminoethyl-Tyr(CO2Me)-D-MetO-Phe-MebetaAla-OH (7l).     

Site-directed 13C solid-state NMR studies on membrane proteins: strategy and goals toward revealing conformation and dynamics as illustrated for bacteriorhodopsin labeled with [1-13C]amino acid residues

We have so far demonstrated that well-resolved and site-specifically assigned (13)C peaks as recorded by site-directed NMR study on (13)C-labeled membrane proteins can serve as a convenient probe to reveal their local conformation and dynamics. We attempted here to clarify the extent to which (13)C NMR spectra of (13)C-labeled fully hydrated bacteriorhodopsin (bR) as a typical membrane protein are visible or well resolved in the presence of inherent fluctuation motions with frequency of 10(2)-10(8) Hz, especially at the membrane surfaces. Accordingly, we estimated the relative proportion of (13)C NMR signals from the surface areas with and without peak suppression by the accelerated transverse relaxation effect by surface-bound Mn(2+) ions, which could be effective for residues within 8.7 angstroms of the membrane surface. It turned out that the experimental findings are consistent with the predicted amount of amino acid residues under consideration located within 8.7 angstroms of the surface for [1-(13)C]Val- and Ile-labeled bR and also [3-(13)C]Ala-bR. In contrast, (13)C NMR peaks from such surfaces area are almost completely or partially suppressed for [1-(13)C]Gly-, Ala-, Leu-, Phe- and Trp-labeled bR, as a result of plausible interference of the fluctuation frequency with frequency of magic angle spinning (10(4) Hz). We further assigned several (13)C NMR signals of [1-(13)C] Val-, Trp- and Ile-labeled bR on the basis of a variety of site-directed mutants with reference to those of the wild type. Further, we recorded the (13)C NMR of bR in lipid bilayers to search for the optimal conditions to be able to obtain signals with the highest peak intensities and spectral resolution. Backbone dynamics turn out to be essential for recording (13)C NMR spectra so as to escape from motional frequencies of the order of 10(4)-10(5) Hz, either in the direction of accelerated fluctuation or slowed motions in the direction of forming the 2D array.     

Thermal stability of phthalate esters: Effect of substituents on the β-carbon atom

In order to clarify the mechanism conferring heat resistance on phthalate esters, those with a substituent on the β-carbon atom, such as bis(2-aminobutyl) phthalate, bis(2-nitrobutyl) phthalate, bis(2,4-diphenylbutyl) phthalate and dineopentyl phthalate, were synthesized and their thermal stabilities were studied by thermogravimetry and differential thermal analysis. The analytical results for these phthalate esters were compared with those for dibutyl phthalate, with a straight alkyl chain. As the temperatures required for a 3% weight loss of phthalate esters with a substituent, an electron-donating group (amino group) or an electron-accepting group (nitro group) on the β-carbon atom move to the higher end of the range, the effect of the adjacent group was recognized. The presence of a phenyl group in phthalate esters considerably improved the heat resistance. It is considered that the high heat resistance of bis(2,4-diphenylbutyl) phthalate is due to the obstruction of the planar configuration for cis elimination by the phenyl group and hindrance by the phenyl group of the formation of the six-membered cyclic transition state owing to the interaction between non-bondable molecules.     

Ferromagnetic anomaly associated with the antiferromagnetic transitions in (donor)[Ni(mnt)2]-type charge-transfer salts

Three newly prepared [Ni(mnt)2] complexes, (HMTTF)[Ni(mnt)2], (ChSTF)[Ni(mnt)2], and (DBTTF)2[Ni(mnt)2], are reported (DBTTF = dibenzotetrathiafulvalene, ChSTF = 2,3-cyclohexylenedithio-1,4-dithia-5,8-diselanafulvalene, HMTTF = bis(trimethylene)-tetrathiafulvalene, and mnt = maleonitrile dithiolate). The former two compounds have usual DA-type (D = donor, A = acceptor) mixed stacks, whereas the DBTTF complex has DDDDAA-type 6-fold columns. These compounds are electrical insulators, but the HMTTF and ChSTF complexes exhibit chiT minima at 16 and 55 K, respectively, followed by chiT peaks at 8 and 16 K. Below these temperatures the ESR signal disappears, indicating antiferromagnetic transitions. The origin of the ferromagnetic interaction is explained either from the difference of the g values between the donor and the anion or from the intrinsic ferromagnetic interaction of the [Ni(mnt)2] anions.     

Supported molybdena catalysts: Characterization of oxidized,reduced, and sulfided MoO3 prepared by an adsorption method

Highly dispersed molybdena-titania catalyst can be prepared by an equilibrium adsorption method. In this method, molybdate anions adsorb onto the positively charged titania surfaces via electrostatic attraction by controlling the pH of the impregnating solution and they increase as an inverse function of the pH. ⁹⁵Mo-NMR and UV spectroscopic studies of impregnating solution show that the polymeric species like Mo₇O₂₄ ⁶-ions are adsorbed on titania in the acidic impregnating solution. XRD, Raman, and XPS data of the calcined samples show that mono-layer coverage of molybdenum oxide over-layer possesses a highly distorted MoO₆ group with a molecular geometry resembling the distorted square pyramid. The catalytic oxidation of methanol over the surface molybdate species on titania possesses higher turnover numbers and higher selectivities of partial oxidation products than the catalysts supported on alumina, silica, zirconia, or magnesia. Changes of the surface properties either after reduction and sulfiding treatment over monolayer catalyst on titania have also been investigated. The NO chemisorption and XPS studies show that two types of active sites appeared after reduction treatment: one site is active for hydrogenation of 1,3-butadiene and the other site is active for metathesis of propene. A higher degree coordinative unsaturations of MO is required for hydrogenation than metathesis. After sulfiding treatments of the catalyst, hydrogenation of 1,3-butadiene also requires triply coordinative unsaturation, and hydrogenolysis of thiophene requires the ensemble of doubly or triply coordinative unsaturations.     

Phase separation and extraction with acetonitrile for sample preparation in HPLC analysis

Summary Acetonitrile can be salted-out from aqueous solution by adding tetrabutylammonium perchlorate. This phase separation method has been used for the extraction of the Fe(III)-4,7-diphenylphenanthroline complex into acetonitrile followed by direct injection onto an ODS column. The Fe complex is separated by using 9:1 acetonitrile/water as a mobile phase. The proposed reversed-phase high-performance liquid chromatography has been applied to the determination of Fe in serum.     

Asymmetric synthesis of dipeptides by means of homogeneous hydrogenation catalyzed by chiral rhodium complexes

Asymmetric hydrogenation of dehydrodipeptides, α-acylaminocinnamoyl-(S)-amino esters, catalyzed by rhodium complexes with chiral diphosphines gave either (R)-N-acylphenylalanyl-(S)-amino esters or (S)-N-acylphenylalanyl-(S)-amino esters with high diastereomeric purity up to 98–99% on using proper chiral ligands.     

The effect of humidity on thermal process of zinc acetate

The thermal decomposition of zinc acetate dihydrate Zn(CH₃CO₂)₂·2H₂O in some humidity-controlled atmospheres has been successfully investigated by novel thermal analyses, which are sample-controlled thermogravimetry (SCTG), thermogravimety combined with evolved gas analysis using mass spectrometry (TG–MS) and simultaneous measurement of differential scanning calorimetry and X-ray diffractometry (XRD–DSC). The thermal processes of anhydrous zinc acetate in dry gas atmosphere by conventional linear heating experiment initiated with the sublimation around 180 °C, followed by the fusion and the decomposition over 250 °C. SCTG was useful to interpret clearly the successive reaction because the high-temperature parallel decompositions were effectively inhibited. The thermal behavior changed dramatically by introducing water vapor in the atmosphere and the thermal process was quite different from that in dry gas atmosphere. Zinc oxide (ZnO) was formed only in a humidity-controlled atmosphere, and could be easily synthesized at temperatures below 300 °C. XRD–DSC equipped with a humidity generator revealed directly the crystalline change from Zn(CH₃CO₂)₂ to ZnO. A detailed thermal process of Zn(CH₃CO₂)₂·2H₂O and the effect of water vapor are discussed.     

Novel ring transformation reactions of xanthine derivatives

The novel ring transformation reactions were found in the reactions of 1,3,7,9-tetra-alkyl-8,9-dihydroxanthines and acetylenic compounds. The reaction of the dihydroxanthine with DMAD gave a propellane type compound and with methyl propiolate afforded the similar type compound and a pyrimido[4,5-b]diazepine derivative. The mechanism of these reactions was also discussed.     

Cyclic dithio-carbenium ion salts and their conversion to ketene dithioacetals

1,2-Ethanedithiol and 1,3-propanedithiol were treated with perchloric acid in acetic anhydride to give 2-methyl-1,3-dithiolan-2-yl and 2-methyl-1,3-dithian-2-yl perchlorates, respectively, which were converted to ketene dithioacetals by deprotonation with tertiary amines.