Swelling of poly(ethylene oxide) gel in aqueous solutions of sodium dodecyl sulfate with added sodium chloride

The swelling behavior of poly(ethylene oxide) (PEO) gels in aqueous solutions of sodium dodecyl sulfate (SDS) with and without NaCl was investigated. In the absence of NaCl, PEO gels with different degrees of cross-linking began to swell from a concentration lower than the critical micelle concentration (cmc) of SDS, then showed sigmoidal enhancements of swelling in a higher SDS concentration region until the degrees of swelling reached maximum values. The SDS concentration at which the swelling began to appear was in reasonable agreement with the critical aggregation concentration (cac) value reported for the aqueous PEO system. For the cases where NaCl was present, the swelling behavior of PEO gel was different from that when NaCl was absent in the following way. The concentrations where the swelling begins to appear, and hence those where the degree of swelling rises steeply, decreased with an increase in NaCl concentration. The ultimate degrees of swelling at higher concentration regions also decreased with an increase in the NaCl concentration. The lowering of the SDS concentrations at which the PEO gel began to swell is in line with the decreases in the cmc of SDS solutions containing NaCl and also with the decreases in the cac of PEO solution. Electronic Publication     

Solvent dependence of the ultrafast ground state recovery dynamics of phenol blue

We have studied femtosecond ground state recovery dynamics of phenol blue (PB) by pump-probe spectroscopy with a time resolution of 33 fs. Multiexponential decay with time constants extending from 300 fs to 10 ps were observed. Some low frequency intramolecular quantum beats were also observed. Solvent dependence of these decays and beats are discussed.     

Generation of a novel monoclonal antibody against cortisol-[C-4]-bovine serum albumin conjugate: application to enzyme-linked immunosorbent assay for urinary and serum cortisol.

Measurement of cortisol levels in body fluids is important for monitoring pituitary gland and adrenal functions. To develop a specific and standardized enzyme-linked immunosorbent assay (ELISA), a novel monoclonal anti-cortisol antibody has been generated using a reasonably designed haptenic derivative. Spleen cells were prepared from the BALB/c or A/J mouse, which had repeatedly been immunized with a conjugate of 4-(2-carboxyethylthio)cortisol (CET) and bovine serum albumin, to be fused with P3/NS1/1-Ag4-1 myeloma cells. After four fusion experiments, one hybridoma clone secreting a practical antibody has been established. The resulting monoclonal antibody CS#38 (isotype gamma1, kappa) showed an affinity constant (K(a)) for cortisol of 1 x 10(9) M(-1) and provided a practical calibration curve (detection limit, 0.26 ng per assay) in a homologous ELISA system employing horseradish peroxidase-labeled CET as a labeled antigen. Cross-reactivities with related C-21 steroids were acceptably low: 11-deoxycortisol (4.3%), cortisone (4.0%), corticosterone (1.9%), progesterone (1.6%), 17alpha-hydroxyprogesterone (12%), 6beta-hydroxycortisol (8.4%), and tetrahydrocortisol (< 0.1%). Urinary and serum cortisol levels of healthy volunteers were determined by this method after methylene chloride extraction to be 39.0 +/- 17.0 microg/day (n = 7) and 80.8 +/- 38.9 ng/mL (n = 10), respectively, both of which are in the reference range.     

A characterization of isotropic immersions by extrinsic shapes of smooth curves

In this paper we show that an isometric immersion is isotropic in the sense of O'Neill if and only if it preserves logarithmic derivatives of first geodesic curvatures of some curves.     

Observation and evaluation of proton diffusion in porous media by the pH-imaging microscope using a flat semiconductor pH sensor.

The diffusion of protons in porous media was observed and evaluated using a pH-imaging microscope with a flat semiconductor. Small particles were packed on the sensing surface of the flat sensor, followed by the addition of a lactic acid droplet on the top of the packed particle layer. The pH distribution accompanied by the diffusion of lactic acid was visualized at the bottom of the layer using the flat sensor. The difference in the diffusion property was confirmed depending on the particle type. The effective diffusion coefficients of the lactic acid in some porous media were estimated by combining the experimental results and mathematical calculation.     

Structure and properties for biomass-based polyester blends of PLA and PBS

Structure and properties are studied for binary blends composed of poly(lactic acid) (PLA) and poly(butylene succinate) (PBS). The rheological measurements in the molten state reveal that the entanglement molecular weight of PLA is lower than that of PBS. Further, the interfacial tension of the immiscible blend system is evaluated employing a rheological emulsion model and found to be 3.5 [mN/m]. Moreover, thermal analysis directly detects that addition of PBS enhances the crystallization of PLA even though PBS is in a molten state. Further, the cold-crystallization for quenched blends occurs at lower temperature than that for a quenched PLA. This would be attributed to the nucleating ability of PBS, leading to generation of PLA crystallites during the quench operation.     

Saikachinoside A, a novel 3-prenylated isoguanine glucoside from seeds of Gleditsia japonica

A new isoguanine glucoside designated saikachinoside A has been isolated from the seeds of Gleditsia japonica. The structure was determined as 7-β-d-glucopyranosyl-3-[(Z)-4-hydroxy-3-methyl-2-butenyl]isoguanine by interpretation of the spectroscopic data and was confirmed by X-ray crystallographic analysis. Saikachinoside A accelerated acetylcholinesterase activity.     

Excess enthalpies of binary mixtures of <Emphasis Type="Italic">ortho</Emphasis>-, <Emphasis Type="Italic">meta</Emphasis>-, and <Emphasis Type="Italic">para</Emphasis>-structural isomers

The excess molar enthalpies of 8 binary mixtures for the o-, m-, and p-isomers of fluoroiodobenzene, fluoromethoxybenzene, bromofluorobenzene, chlorofluoro-benzene, difluorobenzene, fluoromethylbenzene, fluoronitrobenzene, and aminofluoro-benzene were measured at 298.15 K. The changes of the measured enthalpies were very small. The experimental results revealed that the isomers containing two electron-acceptor groups showed the most positive excess enthalpy change, while isomers containing both one electron donor and one electron acceptor group, such as aminofluorobenzene, showed more stable and always the most negative results.     

Pressure loading of detonation waves through 90-degree bend in high pressure H2–O2–N2 mixtures

Detonation experiments are conducted to investigate the detonation wave behavior in steam pipelines of boiling water reactors. Accumulated gases in BWRs are stoichiometric hydrogen/oxygen mixtures diluted with steam at 7 MPa. In the experiment, flammable gas mixture diluted with nitrogen at room temperature and up to 5 MPa is used to achieve equivalent detonation condition. Two test pieces are used, one is straight tube and the other is 90-degree bend. No initial pressure dependency in detonation wave behavior is observed in the experiments. However, in the straight tube tests, detonation velocities higher than theoretical values are measured when the initial pressures are greater than 2.3 MPa. This result is considered as attribution of real gas effect. In the 90-degree bend experiments, pressure time histories reveal pressure loads greater than the straight tube portion at two locations. One is a high pressure peak at the extrados of the bend and the other is a double pressure peak just downstream of the bend outlet. Second pressure peak just downstream of the bend outlet is due to transverse wave propagation. Additionally, the largest impulse is observed not at the extrados of the bend but at the intrados of bend outlet. These results show the importance of more investigations on transverse wave behaviors in failure potential evaluation.