Reversible solid-state structural conversion between a three-dimensional network and a one-dimensional chain of Cu(II) triazole coordination polymers in acidic/basic-suspensions or vapors

New Cu(II) triazole coordination polymers with a 3D network were synthesized and reversible structural conversion between a 3D network and a 1D chain with color change was realized by pH controlled acidic and basic-suspensions or vapors. For each conversion process of decreasing and increasing pH, conversion was accomplished with high yield, in which the crystal before conversion played the role of a solid-state crystal template.     

Synthesis, inhibitory effects on nitric oxide and structure-activity relationships of a glycosphingolipid from the marine sponge Aplysinella rhax and its analogues

The novel glycosphingolipid, β-D-GalNAcp(1-->4)[α-D-Fucp(1-->3)]-β-D-GlcNAcp(1-->)Cer (A), isolated from the marine sponge Aplysinella rhax has a unique structure, with D-fucose and N-acetyl-D-galactosamine moieties attached to a reducing-end N-acetyl-D-glucosamine through an α1-->3 and β1-->4 linkage, respectively. We synthesized glycolipid 1 and some non-natural di- and trisaccharide analogues 2-6 containing a D-fucose residue. Among these compounds, the natural type showed the most potent nitric oxide (NO) production inhibitory activity against LPS-induced J774.1 cells. Our results indicate that both the presence of a D-Fucα1-3GlcNAc-linkage and the ceramide aglycon portion are crucial for optimal NO inhibition.     

X-ray imaging of newly-developed gadolinium compound/silica core–shell particles

A preparation method for gadolinium compound (Gd) nanoparticles coated with silica (Gd/SiO₂) is proposed. Gd nanoparticles were prepared with a homogeneous precipitation method at 80 °C using 1.0 × 10⁻³ M Gd(NO₃)₃ and 0.5 M urea in the presence of 1.0 g/L stabilizer. Among stabilizers examined. Sodium n-dodecyl sulfate (SDS) was suitable as the stabilizer for preparing small Gd nanoparticles, and consequently Gd nanoparticles with a size of 46.2 ± 12.4 nm were prepared using the SDS. Silica-coating of the Gd nanoparticles was performed by a St?ber method at room temperature using 0.013 M TEOS and 2.0 × 10⁻³ M NaOH in water/1-propanol solution in the presence of 1.0 × 10⁻³ M Gd nanoparticles, which resulted in production of Gd/SiO₂ particles with an average size of 64.2 ± 14.4 nm. The Gd/SiO₂ particles were surface-modified with 3-aminopropyltrimethoxysilane and succinic anhydride. It was confirmed by measurement of electrophretic light scattering that amino group or carboxyl group was introduced onto the Gd/SiO₂ particles. The gadolinium concentration of 1.0 × 10⁻³ M in the as-prepared colloid solution was increased up to a gadolinium concentration of 0.4 M by centrifugation. The core–shell structure of Gd/SiO₂ particles was undamaged, and the colloid solution was still colloidally stable, even after the concentrating process. The concentrated Gd/SiO₂ colloid solution showed an X-ray image with contrast as high as a commercial Gd complex contrast agent. Internal organs in a mouse could be imaged injecting the concentrated colloid solution into it.     

Transition processes from the lamellar to the onion state with increasing temperature under shear flow in a nonionic surfactant/water system studied by Rheo-SAXS

In a previous paper, we reported for the first time the lamellar-to-onion transition with increasing temperature at around 67 °C under a constant shear rate (0.3-10 s(-1)) in a nonionic surfactant C(16)E(7)/water system. In this study, the first temperature-shear rate diagram has been constructed in a wider range of shear rate (0.05-30 s(-1)) than in our previous study based on the temperature dependence of the shear stress at constant shear rate. The results suggest that the critical temperature above which the transition begins does not depend on the shear rate very much, although it takes a very shallow minimum. Then we have performed simultaneous measurements of small-angle X-ray scattering/shear stress (rheo-SAXS) with a stepwise increase in temperature of 0.1 K per 15 min at a constant shear rate of 3 s(-1) near the transition temperature. When the temperature exceeds 67 °C, just before the increase in the shear stress, the intensity of the Bragg peak for the velocity gradient direction (approximately proportional to the number of lamellae with their normal along this direction) is suddenly increased. As the temperature increases by 0.2 K, the shear stress begins to increase. At the same time, the peak intensity in the velocity gradient direction rapidly decreases and instead the intensity in the neutral direction increases. As the temperature increases further, the intensities in both the neutral and gradient directions decrease whereas the intensity in the flow direction increases, corresponding to the formation of onions. We have also performed rheo-SAXS experiments with a stepwise increase in shear rate at 72 °C. The sequence of the change in the intensity in each direction is almost the same in the temperature scan experiments at constant shear rate, suggesting that the transition mechanisms along these two paths are similar. The abrupt enhancement of the lamellar orientation with the layer normal along the velocity gradient direction just before the transition is the first finding and strongly supports the coherent buckling mechanism in the lamellar-to-onion transition proposed by Zilman and Granek (Zilman, A. G.; Granek, R. Eur. Phys. J. B 1999, 11, 593).     

Metal adsorbent for alkaline etching aqua solutions of Si wafer

High performance adsorbent is expected to be synthesized for the removal of Ni and Cu ions from strong alkaline solution used in the surface etching process of Si wafer. Fibrous adsorbent was synthesized by radiation-induce emulsion graft polymerization onto polyethylene nonwoven fabric and subsequent amination. The reaction condition was optimized using 30 L reaction vessel and nonwoven fabric, 0.3 m width and 18 m long. The resulting fibrous adsorbent was evaluated by 48 wt% NaOH and KOH contaminated with Ni and Cu ions, respectively. The concentration levels of Ni and Cu ions was reduced to less than 1 μg/kg (ppb) at the flow rate of 10 h^?1 in space velocity. The life of adsorbent was 30 times higher than that of the commercialized resin. This novel adsorbent was commercialized as METOLATE^® since the ability of adsorption is remarkably higher than that of commercial resin used practically in Si wafer processing.     

Liquid chromatographic determination of microcystins in water samples following pre-column excimer fluorescence derivatization with 4-(1-pyrene)butanoic acid hydrazide

A method to measure the concentrations of microcystins (MCs) in water samples has been developed by incorporating pre-column fluorescence derivatization and liquid chromatography (LC). A solid-phase extraction for pretreatment was used to extract the MCs in water samples. The MCs were derivatized with excimer-forming 4-(1-pyrene)butanoic acid hydrazide (PBH). The MCs could then be detected by fluorescence after separation with a pentafluorophenyl (PFP)-modified superficially porous (core shell) particle LC column. The derivatization reactions of MCs with PBH proceeded easily in the presence of 4,6-dimethoxy-1,3,5-triazin-2-yl-4-methylmorpholinium (DMT-MM) as a condensation reagent, and the resulting derivatives could be easily separated on the PFP column. The derivatives were selectively detected at excimer fluorescence wavelengths (440–540 nm). The instrument detection limit and the instrument quantification limit of the MCs standards were 0.4–1.2 μg L⁻¹ and 1.4–3.9 μg L⁻¹, respectively. The method was validated at 0.1 and 1.0 μg L⁻¹ levels in tap and pond water samples, and the recovery of MCs was between 67 and 101% with a relative standard deviation of 11%. The proposed method can be used to quantify trace amounts of MCs in water samples.     

Redesign of enzyme for improving catalytic activity and enantioselectivity toward poor substrates: manipulation of the transition state

Secondary alcohols having bulky substituents on both sides of the hydroxy group are inherently poor substrates for most lipases. In view of this weakness, we redesigned a Burkholderia cepacia lipase to create a variant with improved enzymatic characteristics. The I287F/I290A double mutant showed a high conversion and a high E value (>200) for a poor substrate for which the wild-type enzyme showed a low conversion and a low E value (5). This enhancement of catalytic activity and enantioselectivity of the variant resulted from the cooperative action of two mutations: Phe287 contributed to both enhancement of the (R)-enantiomer reactivity and suppression of the (S)-enantiomer reactivity, while Ala290 created a space to facilitate the acylation of the (R)-enantiomer. The kinetic constants indicated that the mutations effectively altered the transition state. Substrate mapping analysis strongly suggested that the CH/π interaction partly enhanced the (R)-enantiomer reactivity, the estimated energy of the CH/π interaction being -0.4 kcal mol(-1). The substrate scope of the I287F/I290A double mutant was broad. This biocatalyst was useful for the dynamic kinetic resolution of a variety of bulky secondary alcohols for which the wild-type enzyme shows little or no activity.     

Biogenous iron oxide-immobilized palladium catalyst for the solvent-free Suzuki–Miyaura coupling reaction

Iron oxide produced by iron-oxidizing bacteria, Leptothrix ochracea, (biogenous iron oxide: BIO) was used as a support for immobilized palladium catalysts with organic cross-linkers. Palladium immobilized on BIO bearing imidazolium chloride delivered the desired biaryl products in sufficient yields in the Suzuki–Miyaura coupling reactions under solvent-free conditions and could be reused several times without significant loss of catalytic activity. It is shown that BIO can be exploited as a useful support for immobilization of palladium and the BIO-immobilized palladium catalyst effectively promotes the solvent-free Suzuki–Miyaura coupling reactions.