Propylene carbonate as a solvent for salting-out extraction and subsequent differential pulse polarography

Summary Selective and sensitive procedures are described for the direct differential pulse polarographic determination of antimony(III), indium(III) and cadmium(II) in propylene carbonate. This method was based on the salting-out extraction of their halide complexes into the solvent from acidic aqueous media. The extracted Sb(III), In(III) and Cd(II) complexes exhibit sharp differential pulse polarographic peaks at –0.21 V, –0.63 V and –0.72 V vs. SCE in salted-out propylene carbonate phases respectively. The lower limits of determination are 5.0g for Sb(III), 0.6g for In(III), and 0.2g for Cd(II) in 10 ml of the organic phase. A number of foreign ions are eliminated through both processes of solvent extraction and polarography using propylene carbonate.

---

Propylencarbonat als Lösungsmittel für die Fällungs-Extraktion und die nachfolgende Differential-Puls-Polarographie

Zusammenfassung Selektive und empfindliche Verfahren für die direkte Bestimmung von Sb(III), In(III) und Cd(II) in Propylencarbonat mit Hilfe der Differential-Puls-Polarographie wurden beschrieben. Die vorliegende Methode beruht auf der Fällungs-Extraktion der Halogenid-Komplexe aus wäßrig-saurem Medium in das Lösungsmittel. Die extrahierten Komplexe des Sb(III), In(III) und Cd(II) ergeben scharfe Peaks bei –0,21 V, –0,63 V und –0,72 V gegen die Kalomelelektrode in den betreffenden Propylencarbonat-Phasen. Die unteren Grenzen der Bestimmungen liegen bei 5,0g Sb, 0,6g In bzw. 0,2g Cd in 10 ml organischer Phase. Eine Anzahl Fremdionen wird durch die beiden Prozesse der Extraktion und der Polarographie in Propylencarbonat ausgeschaltet.

     

Broad spectrum and mode of action of an antibiotic produced byScytonema sp. TISTR 8208 in a seaweed-type bioreactor

A photobioreactor was constructed using anchored polyurethane foam strips (1 x 1 x 40 cm) fixed onto a stainless-steel ring to prevent flotation, as a biomass support material (BSM). This type of reactor was named a seaweed-type bioreactor. A filamentous cyanobacterium, Scytonema sp. TISTR 8208, which produces a novel cyclic dodecapeptide antibiotic, was immobilized in seaweed-type photobioreactor and cultivated with air containing 5% CO₂ sparged at a gas flow rate of 250 mL/min under illumination at a light intensity of 200 μmol photon m^-2s^-1. The antibiotic produced in the seaweed-type photobioreactor was purified by HPLC and examined regarding its spectrum and mode of action. The antibiotic effectively inhibited the growth of Gram-positive bacteria, pathogenic yeasts, and filamentous fungi, but it had only a weak effect on Gram-negative bacteria. Scanning electron micrograph analysis showed that the most characteristic change was swelling of the cells after exposure to the antibiotic. The antibiotic seems to alter the conformation of the microbial cell membrane, thereby changing its permeability, leading to osmotic shock.     

Structures and stabilities of 3d-transition metal-benzene organometallic clusters

In the gas phase, we have successfully synthesized organometallic clusters, M_n(benzene)_m (M=3d transition metal atoms), by using a laser vaporization method. The measurements of mass spectra and ionization energies (E_i) have revealed that the organometallic clusters can take two types of structures; layered sandwich structures (m = n + 1) and metal clusters saturatedly covered with benzenes. For early transition metals of Sc, Ti, and V, only the multiple decker sandwich structure clusters were preferentially produced, in which benzene and metal atoms are alternately piled up. For late transition metals of Co and Ni, the metal clusters saturatedly surrounded by benzenes were also produced as well as the sandwich clusters. Furthermore, the E_is of M₁(benzene)₂ (M = Sc-Ni) were systematically measured and their electronic properties will be discussed.     

CFD simulation and analysis of emulsion droplet formation from straight-through microchannels

We recently proposed a technique for preparing monodisperse emulsions with a coefficient of variation below 5% from a silicon array of micrometer-sized channels perpendicular to the plate surface, named a straight-through microchannel (MC). This study involved three-dimensional computational fluid dynamics (CFD) simulations to calculate the formation of an oil-in-water (O/W) emulsion droplet from straight-through MCs with circular and elliptic cross sections. The CFD results demonstrated that the oil phase that passed through the elliptic MCs exceeding a threshold aspect ratio between 3 and 3.5 was cut off spontaneously into a small droplet with a diameter of approximately 40 microm. Sufficient space for water at the channel exit had to be maintained for successful droplet formation. The formation and shrinkage of a neck inside the channel caused an increased pressure difference inside the channel and an increased velocity value near the neck. The pressure and velocity values at the neck drastically changed, and the neck was cut off instantaneously just before the completion of droplet formation. This process was triggered by a gradually increased pressure difference between the circular neck and inflating oil phase. The findings obtained in this paper provide useful numerical and visual information about the droplet formation phenomena from the straight-through MCs. The CFD results were verified by the experimental results, showing that the CFD approach can help design a suitable channel structure.     

Small angle X-ray scattering from lamellar phase for β-3,7-dimethyloctylglucoside/water system: comparison with β-n-alkylglucosides

Small angle X-ray scattering (SAXS) is measured for the lamellar phase in aqueous systems of 1-o-β-3,7-dimethyoctyl-D-glucopyranoside (β-Glc(Ger)), which has recently been prepared by us, 1-o-β-decyl-D-glucopyranoside (β-GlcC₁₀), and 1-o-β-octyl-D-glucopyranoside (β-GlcC₈). The repeat distance d obtained from the position of the diffraction peak does not follow the swelling law d = 2δ_hc/_hc, where δ_hc and _hc are the thickness and the volume fraction of the hydrophobic layer, respectively. This may result from the fact that δ_hc increases and, equivalently, the surface area per surfactant molecule (a_s) decreases with increasing concentration. So we calculate δ_hc and a_s from the observed d value at each concentration using the above swelling law. The half-thickness δ_hc increases in the order β-GlcC₈ < β-Glc(Ger) < β-GlcC₁₀ at a fixed concentration. On the other hand, the data on a_s for β-GlcC₁₀ and β-GlcC₈ lie on the same line and the data for β-Glc(Ger) lies above this line. These results suggest that the cross-sectional area of the geranyl chain is larger than that of the glucose headgroup. Existence of water filled defects in bilayer sheets is also discussed based on the SAXS pattern and the concentration dependence of d.     

An ore-type condition for the existence ofk-factors in graphs

Letk be a positive integer, and letG be a graph of ordern withn 4k – 5,kn even and minimum degree at leastk. We prove that if the degree sum of each pair of nonadjacent vertices is at leastn, thenG has ak-factor.     

Calculations of the electrostatic free energy contributions to the binding free energy of sulfonamides to carbonic anhydrase

The interactions between biologically important enzymes and drugs are of great interest. In order to address some aspects of these interactions we have initiated a program to investigate enzymedrug interactions. Specifically, the interactions between one of the isozymes of carbonic anhydrase and a family of drugs known as sulfonamides have been studied using computational methods. In particular the electrostatic free energy of binding of carbonic anhydrase II with acetazolamide, methazolamide,p-chlorobenzenesulfonamide,p-aminobenzenesulfonamide and three new compounds (MK1, MK2, and MK3) has been computed using finite-difference Poisson-Boltzmann (FDPB) [1] method and the semimacroscopic version [2, 3] of the protein dipole Langevin dipole (PDLD) method [4]. Both methods, FDPB and PDLD, give similar results for the electrostatic free energy of binding even though different charges and different treatments were used for the protein. The calculated electrostatic binding free energies are in reasonable agreement with the experimental data. The potential and the limitation of electrostatic models for studies of binding energies are discussed.     

Highly sensitive chiral shift reagent bearing two zinc porphyrins

A new type of chiral receptor (R,R)- or (S,S)-1b with C(2) symmetry was synthesized. An induced-fit type of binding behavior of 1b for diamines was revealed by CD spectroscopy. NMR studies demonstrated that 1b can function as a highly sensitive chiral shift reagent for the determination of the enantiomeric purity of chiral diamines, aziridine, and isoxazoline at the microgram level. [structure: see text]     

Preparation of dehydrated powder of hemoglobin vesicles

The carbonyl hemoglobin (CO-Hb), which was used to prevent denaturation (metHb) during the preparation of samples, was encapsulated into lipid vesicles constituted from unsaturated phospholipid, cholesterol and unsaturated fatty acid. Unsaturated components were polymerized by γ-irradiation to enhance the stability of bilayer membrane. An aqueous dispersion of resulting Hb vesicles was freeze-dried in the presence of saccharides (50–200 mM) to obtain a dehydrated powder of Hb vesicles. Change in the vesicle size, the leakage of encapsulated Hb and the oxidation of Hb to metHb were not observed. Therefore, the long-term storage of Hb vesicles can be realized as a dry powder.