Simultaneous determination of testosterone, cortisol, and dehydroepiandrosterone in saliva by stable isotope dilution on-line in-tube solid-phase microextraction coupled with liquid chromatography–tandem mass spectrometry

We have developed a simple and sensitive method for the simultaneous determination of testosterone (TES), cortisol (CRT), and dehydroepiandrosterone (DHEA) in saliva by automated online in-tube solid-phase microextraction (SPME) coupled with liquid chromatography–tandem mass spectrometry (LC–MS/MS) using a Discovery HS F5 column. The optimum in-tube SPME conditions were 25 draw/eject cycles of 40 μL of sample at a flow rate of 200 μL/min using a Supel-Q PLOT capillary column as an extraction device. The extracted compounds were easily desorbed from the capillary by passage of the mobile phase, and no carryover was observed. The in-tube SPME LC–MS/MS method showed good linearity with correlation coefficients r?≥?0.9998 for TES, CRT, and DHEA using their respective stable isotope-labeled internal standards. The intra-day and inter-day precisions (relative standard deviations) were below 4.9 and 8.5 % (n?=?5), respectively. This method was successfully utilized to analyze TES, CRT, and DHEA in saliva samples without any other pretreatment or interference peaks, and the quantification limits (S/N?=?10) of TES, CRT and DHEA were about 0.01, 0.03 and 0.29 ng/mL saliva, respectively. The recoveries of these compounds spiked into saliva samples were each above 94 %. This method was applied to analyze changes in salivary TES, CRT, and DHEA levels resulting from stress and fatigue load.     

Application of plug–plug technique to ACE experiments for discovery of peptides binding to a larger target protein: A model study of calmodulin‐binding fragments selected from a digested mixture of reduced BSA

To discover peptide ligands that bind to a target protein with a higher molecular mass, a concise screening methodology has been established, by applying a “plug–plug” technique to ACE experiments. Exploratory experiments using three mixed peptides, mastoparan‐X, β‐endorphin, and oxytocin, as candidates for calmodulin‐binding ligands, revealed that the technique not only reduces the consumption of the protein sample, but also increases the flexibility of the experimental conditions, by allowing the use of MS detection in the ACE experiments. With the plug–plug technique, the ACE–MS screening methodology successfully selected calmodulin‐binding peptides from a random library with diverse constituents, such as protease digests of BSA. Three peptides with K_d values between 8–147 μM for calmodulin were obtained from a Glu‐C endoprotease digest of reduced BSA, although the digest showed more than 70 peaks in its ACE–MS electropherogram. The method established here will be quite useful for the screening of peptide ligands, which have only low affinities due to their flexible chain structures but could potentially provide primary information for designing inhibitors against the target protein.     

Preparation of Molecule‐Responsive Microsized Hydrogels via Photopolymerization for Smart Microchannel Microvalves

Microdevices designed for practical environmental pollution monitoring need to detect specific pollutants such as dioxins. Bisphenol A (BPA) has been widely used as a monomer for the synthesis of polycarbonate and epoxy resins. However, the recent discovery of its high potential ability to disrupt human endocrine systems has made the development of smart systems and microdevices for its detection and removal necessary. Molecule‐responsive microsized hydrogels with β‐cycrodextrin (β‐CD) as ligands are prepared by photopolymerization using a fluorescence microscope. The molecule‐responsive micro‐hydrogels show ultra‐quick shrinkage in response to target BPA. Furthermore, the flow rate of a microchannel is autonomously regulated by the molecule‐responsive shrinking of their hydrogels as smart microvalves.

     

Dynamical study of femtosecond-laser-ablated liquid-aluminum nanoparticles using spatiotemporally resolved x-ray-absorption fine-structure spectroscopy

We study the temperature evolution of aluminum nanoparticles generated by femtosecond laser ablation with spatiotemporally resolved x-ray-absorption fine-structure spectroscopy. We successfully identify the nanoparticles based on the L-edge absorption fine structure of the ablation plume in combination with the dependence of the edge structure on the irradiation intensity and the expansion velocity of the plume. In particular, we show that the lattice temperature of the nanoparticles is estimated from the L-edge slope, and that its spatial dependence reflects the cooling of the nanoparticles during plume expansion. The results reveal that the emitted nanoparticles travel in a vacuum as a condensed liquid phase with a lattice temperature of about 2500 to 4200 K in the early stage of plume expansion.     

Energy-dependent tunneling from few-electron dynamic quantum dots

We measure the electron escape rate from surface-acoustic-wave dynamic quantum dots (QDs) through a tunnel barrier. Rate equations are used to extract the tunneling rates, which change by an order of magnitude with tunnel-barrier-gate voltage. We find that the tunneling rates depend on the number of electrons in each dynamic QD because of Coulomb energy. By comparing this dependence to a saddle-point-potential model, the addition energies of the second and third electron in each dynamic QD are estimated. The scale ( approximately a few meV) is comparable to those in static QDs as expected.     

Measurements of branching fractions for B --> K pi and B --> pi pi decays

We report measurements of branching fractions for B --> K pi and B --> pi pi decays based on a data sample of 449 x 10(6) BB[over] pairs collected at the Upsilon(4S) resonance with the Belle detector at the KEKB asymmetric-energy e(+)e(-) collider. We also measure the ratios of partial widths for B-->Kpi decays, namely R(c) identical with 2Gamma(B(+) --> K(+) pi(0))/Gamma(B(+) --> K(0) pi(+)) = 1.08+/-0.06+/-0.08 and R(n) identical with Gamma(B(0) --> K(+) pi(-))/2 Gamma(B(0) --> K(0) pi(0)) = 1.08+/-0.08+/-0.08, where the first and the second errors are statistical and systematic, respectively. These ratios are sensitive to enhanced electroweak penguin contributions from new physics; the new measurements are, however, consistent with standard model expectations.     

Enantioselective Total Synthesis of Dysidavarone A,a Novel Sesquiterpenoid Quinone from the Marine Sponge Dysidea avara

Dysidavarone A, a structurally unprecedented sesquiterpenoid quinone, was synthesized in 30 % overall yield in a longest liner sequence of 13 steps from commercially available o‐vanillin. A highly strained and bridged eight‐membered carbocyclic core was established by the C7?C21 carbon bond formation through a copper enolate mediated Michael addition to the internal quinone ring.     

Photochemical Behavior of Single‐Walled Carbon Nanotubes in the Presence of Propylamine

This report describes the photochemical behavior of single‐walled carbon nanotubes (SWNTs) in the presence of propylamine. The SWNTs are characterized by absorption and Raman spectroscopy. The spectral changes due to photoirradiation indicate that reactions occur predominantly with the metallic SWNTs and small‐diameter SWNTs. The detection of amine radicalcation species by ESR spectroscopy reveals photoinduced electron transfer from the amine to the excited SWNTs. After exposure of the photoirradiated SWNTs to air, the characteristic spectra were recovered, except for that of the small‐diameter SWNTs. The results suggest that, after photoreduction of the SWNTs, subsequent selective sidewall functionalization of the small‐diameter SWNTs occurs.     

Enantiodifferentiating Photodimerization of a 2,6-Disubstituted Anthracene Assisted by Supramolecular Double-Helix Formation with Chiral Amines

A novel 2,6-anthrylene-linked bis(m-terphenylcarboxylic acid) strand ( 1 ) self-associates into a racemic double-helix. In the presence of chiral mono- and diamines, either a right- or left-handed double-helix was predominantly induced by chiral amines sandwiched between the carboxylic acid strands with accompanying stacking of the two prochiral anthracene linker units in an enantiotopic face-selective way, as revealed by circular dichroism and NMR spectral analyses. The photoirradiation of the optically active double helices complexed with chiral amines proceeded in a diastereo- (anti or syn) and enantiodifferentiating way to afford the chiral anti-photodimer with up to 98 % enantiomeric excess when (R)-phenylethylamine was used as a chiral double-helix inducer. The resulting optically active anti-photodimer can recognize the chirality of amines and diastereoselectively complex with chiral amines.     

Construction of Helically Stacked π-Electron Systems in Poly(quinolylene-2,3-methylene) Stabilized by Intramolecular Hydrogen Bonds

π-Stacked polymers, which consist of layered π-electron systems in a polymer, can be expected to be used in molecular electronic devices. However, the construction of a stable π-stacked structure in a polymer is considerably challenging because it requires sophisticated designs and precise synthetic methods. Herein, we present a novel π-stacked architecture based on poly(quinolylene-2,3-methylene) bearing alanine derivatives as the side chain, obtained through the living cyclo-copolymerization of an o-allenylaryl isocyanide. In the resulting polymer, the neighboring quinoline rings of the main chain form a layered structure with π–π interactions, which is stabilized by intramolecular hydrogen bonds. The vicinal quinoline units form two independent helices and the whole molecule is a twisted-tape structure. This structure is established on the basis of UV/CD spectra, theoretical calculations, and atomic-force microscopy.