Small angle X-ray scattering from lamellar phase for β-3,7-dimethyloctylglucoside/water system: comparison with β-n-alkylglucosides

Small angle X-ray scattering (SAXS) is measured for the lamellar phase in aqueous systems of 1-o-β-3,7-dimethyoctyl-D-glucopyranoside (β-Glc(Ger)), which has recently been prepared by us, 1-o-β-decyl-D-glucopyranoside (β-GlcC₁₀), and 1-o-β-octyl-D-glucopyranoside (β-GlcC₈). The repeat distance d obtained from the position of the diffraction peak does not follow the swelling law d = 2δ_hc/_hc, where δ_hc and _hc are the thickness and the volume fraction of the hydrophobic layer, respectively. This may result from the fact that δ_hc increases and, equivalently, the surface area per surfactant molecule (a_s) decreases with increasing concentration. So we calculate δ_hc and a_s from the observed d value at each concentration using the above swelling law. The half-thickness δ_hc increases in the order β-GlcC₈ < β-Glc(Ger) < β-GlcC₁₀ at a fixed concentration. On the other hand, the data on a_s for β-GlcC₁₀ and β-GlcC₈ lie on the same line and the data for β-Glc(Ger) lies above this line. These results suggest that the cross-sectional area of the geranyl chain is larger than that of the glucose headgroup. Existence of water filled defects in bilayer sheets is also discussed based on the SAXS pattern and the concentration dependence of d.     

Effect of moisture on impact toughness of sugar-coated tablets manufactured by the dusting method

The purpose of this study was to clarify the effect of moisture on the impact toughness of sugar-coated tablets manufactured by the dusting method. We demonstrated that moisture plays an important role in the impact toughness of sugar-coated tablets. Moisturizing the sugar-coating layer resulted in enhancement of impact toughness of sugar-coated tablets, while reducing moisture in the sugar-coating layer resulted in weakening of the impact toughness. This was due to the characteristics of sucrose, the main ingredient of the sugar-coating layer, which is a soft and non-fragile material at high moisture levels, but hard and fragile at low moisture levels. We also demonstrated that friability as an indicator of impact toughness changed with time, and friability should be measured at 14 d after manufacture. This is due to moisture movement from outer sugar-coating layer into the inner sugar-coated tablets. Incorporating microcrystalline cellulose (MCC) in the subcoating layer resulted in sugar-coating layers with high resistance against impact even though moisture content of sugar-coated tablets was low. We confirmed the high impact toughness of the sugar-coated tablets with MCC whose moisture content was low from the results of both free fall and friability tests. We suggest that the dusting method using dusting powder containing MCC is a useful method for the production of sugar-coated tablets containing moisture sensitive drugs.     

Terpyridine platinum(ii) complexes containing triazine di- or tri-thiolate bridges: structures, luminescence, electrochemistry, and aggregation

Dinuclear complexes [{Pt(trpy)}(2)(L)](PF(6))(2) (trpy = 2,2':6',2'-terpyridine, L = 2-octylthio-1,3,5-triazine-4,6-dithiolate ion (1), L = 2-octadecylthio-1,3,5-triazine-4,6-dithiolate ion (2), L = 2-di-n-butylamino-1,3,5-triazine-4,6-dithiolate ion (3)) and a trinuclear complex [{Pt(trpy)}(3)(L)](PF(6))(3) (L = 1,3,5-triazine-2,4,6-trithiolate ion (4)) have been synthesized and characterized. The single crystal X-ray analysis revealed that the two {Pt(trpy)}(2+) fragments in 1 and 3 adopt a syn-configuration. The PtPt distances are around 4.3 ?, suggesting no intramolecular PtPt interactions. Complexes 1-4 in acetonitrile show broad absorption bands at around 470 nm, assigned to mainly the ligand-to-ligand charge transfer ((1)LLCT) from triazine thiolates to trpy based on the comparison to the related complexes and the density functional theory (DFT) calculations. The red luminescence of 1-4 in acetonitrile is attributable to emission predominantly from (3)LLCT. Cyclic voltammograms of 1-3 exhibit four redox couples from -2.0 V to 0 V vs. Ag/AgCl. The two consecutive processes at around -0.70 V are assigned to the sequential reduction of two trpy ligands. This assignment was further supported by the observation of the anion radical of trpy in spectroelectrochemical experiments. The splitting of the redox potentials of two trpy ligands evidences the moderate electronic coupling interactions mediated by the triazine dithiolate bridges. Complex 2 formed a transparent red gel in CH(3)CN, whereas 4 produced a gel-like solid in the mixtures of CH(3)CN and other solvents. The interactions dominating the aggregative behaviours have been discussed based on the results of electronic absorption and emission spectroscopy.     

Reactions of Thiazolo[3,2-b]-1,2,4-triazolium N-Ylides with Electron-deficient Acetylenes: Novel Benzoyl Migration of Intermediary 1:1-Adducts and Michael Addition to the Acetylenes

Abstract

Reactions of thiazolo[3,2-b]-1,2,4-triazolium N-methylides with electron-deficient acetylenes gave the thiazole ring-opened products as a mixture of the E-and Z-isomers. In contrast, the N-phenacylides reacted with dimethyl acetylenedicarboxylate to give the thiobenzoates together with the thiazole ring-opened products. The mechanism for formation of these compounds is described.     

Rapid fermentation of beer using an immobilized yeast multistage bioreactor

The characteristics of yeast sulfite metabolism in a multistage bioreactor system for beer fermentation were investigated. No sulfite was produced in the continuous stirred-tank reactor (CSTR). However, large amounts were produced in the packed-bed reactor (PBR). Production of sulfite in the PBR seems to be inevitable when it is operated continuously. In order to control the sulfite level in the young beer, the yeast needs to be reactivated into the growth phase. One possible strategy to achieve this is to aerate and periodically remove yeast clogged in the reactor once every 6–7 months before the sulfite level exceeds a given concentration (e.g., 20 mg/L). It was confirmed that sulfite production is closely related to the growth condition of the yeast and is therefore important to consider in the control strategy for sulfite when using the immobilized yeast reactor for beer production.     

Characterization of magnetic nanoparticles modified with thiol functionalized PAMAM dendron for DNA recovery

Magnetic nanoparticles (MNPs) modified with the thiol functionalized polyamidoamine (PAMAM) dendron were synthesized to estimate their DNA recovery capabilities. Aminosilane-modified MNPs and MNPs surrounded by a phospholipid (distearoylphosphatidylethanolamine (DSPE)) bilayer were used as core particles. Cystamine-core PAMAM dendrimers were reduced by dithiothreitol to dendron thiols and chemically conjugated to the core particles. Characterization of the synthesis revealed an increase of the surface amine charge from generation 1 (G1) to G6, starting with an aminosilane initiator. Particle size distribution analysis indicated that G6 PAMAM-modified MNPs exhibited monodispersity in an aqueous solution. G6 PAMAM-MNPs and G6 PAMAM-PE-MNPs synthesized by the proposed method have equivalent DNA recovery abilities to PAMAM-MNPs prepared by the conventional divergent synthesis method. In optimized conditions, 96% of λDNA was recovered using G6 PAMAM-PE-MNPs. Therefore, the method for preparing PAMAM-MNPs and PAMAM-PE-MNPs proposed in this study will be a novel approach for producing DNA carriers for efficient DNA purification by magnetic separation.     

Synthesis of 1-Trimethylsilyladamantane

The title compound was obtained from 1,3-dichloro-adamantane and some silylating reagents with Na-HMPA.     

A New Route for Preparation of 5‐Deoxy‐5‐(hydroxyphosphinyl)‐ D‐mannopyranose and ‐L‐gulopyranose Derivatives

Starting from methyl 2,3‐O‐isopropylidene‐α‐D ‐mannofuranoside ( 5 ), methyl 6‐O‐benzyl‐2,3‐O‐isopropylidene‐α‐D ‐lyxo‐hexofuranosid‐5‐ulose ( 12 ) was prepared in three steps. The addition reaction of dimethyl phosphonate to 12 , followed by deoxygenation of 5‐OH group, provided the 5‐deoxy‐5‐dimethoxyphosphinyl‐α‐D ‐mannofuranoside derivative 15a and the β‐L ‐gulofuranoside isomer 15b . Reduction of 15a and 15b with sodium dihydrobis(2‐methoxyethoxy)aluminate, followed by the action of HCl and then H₂O₂, afforded the D ‐mannopyranose ( 17 ) and L ‐gulopyranose analog 21 , each having a phosphinyl group in the hemiacetal ring. These were converted to the corresponding 1,2,3,4,6‐penta‐O‐acetyl‐5‐methoxyphosphinyl derivatives 19 and 23 , respectively, structures and conformations (⁴C₁ or ¹C₄, resp.) of which were established by ¹H‐NMR spectroscopy.     

Fully automated reagent peak‐free liquid chromatography fluorescence analysis of highly polar carboxylic acids using a column‐switching system and fluorous scavenging derivatization

In this study, we combined a column‐switching system with a fluorous scavenging derivatization method to develop a fully automated reagent peak‐free LC fluorescence detection protocol for the analysis of highly polar carboxylic acids. In this method, highly polar carboxylic acids were derivatized with fluorescent 1‐pyrenemethylamine in the presence of 1‐ethyl‐3‐(3‐dimethylaminopropyl)carbodiimide and 1‐hydroxy‐1H‐benzotriazole. Residual excess of the unreacted reagent was tagged with 2‐(perfluorooctyl)ethyl isocyanate and then removed selectively using a fluorous column‐switching system placed in front of an analytical reversed‐phase column. The signal of the fluorous‐tagged unreacted reagent was completely absent in the resulting chromatograms; therefore, it did not interfere with the quantification of each acid especially those eluted before 20 min. The detection limits (S/N = 3) for the examined acids were in the range from 4.0 to 22 fmol per injection. We have applied this method to comparative analysis of highly polar carboxylic acids in urine samples obtained from diabetes mellitus type‐II model mice and their control.     

Reaction of Selenocarbonyl Compounds with Oxygen-Functionalized Conjugated Dienes

Selenoaldehydes and selenoketones, generated by thermal retro-Diels-Alder reaction of their cycloadducts with cyclopentadiene, reacted with oxygen-functionalized conjugated dienes such as 1-acetoxy-1,3-butadiene, Danishefsky's diene, and 1,4-diacetoxy-1,3-butadiene to give the corresponding cycloadducts in good yields regioselectively.