动态光散射和透射电镜法研究pH和NaCl对丝胶蛋白微观结构的影响

应用近红外光谱法、动态光散射法及透射电镜扫描法,研究了pH和NaCl浓度对丝胶蛋白聚集微观结构的影响。近红外光谱显示丝胶蛋白在酰氨Ⅰ带1 700～1 600 cm-1附近有较强吸收峰。通过zeta电势法测定丝胶蛋白的表观等电点为pH 3.7。应用动态光散射法测定了在不同pH和NaCl浓度下丝胶蛋白颗粒的分散粒径,pH 4及高NaCl浓度时,丝胶蛋白聚集颗粒粒径大且分散系数大;pH 3或pH 8及低NaCl浓度时丝胶蛋白聚集颗粒粒径和分散系数相对较小。采用透射扫描电镜观察丝胶蛋白在pH 3或pH 8条件下聚集形成松散的松针状微观结构,在pH 4或者高NaCl浓度下会聚集形成相对紧密的微观结构。pH 4时可以观察到丝胶蛋白的椭圆形单聚体大小约为(60±6)nm(n=10)。并探讨了静电斥力、氢键和范德华吸引力对丝胶蛋白微观结构形成的影响,为丝胶蛋白作为生物材料的应用提供了理论依据。     

High-resolution GaP Terahertz Spectrometer and Its Application to Detect Defects in Gamma-irradiated Glucose Crystal

We developed high-resolution GaP THz signal generator using Cr:Forsterite lasers with gratings as both a pump and a signal beam for difference-frequency generation. A line width of less than 500 MHz and a wide tunable frequency range (0.6–6.2 THz) provide sufficient resolution for measuring materials with sharp absorption bands using the generator as the light source for a THz spectrometer. This is suitable for materials such as gases or solid samples at low temperatures. We demonstrated the detection of defects in organic materials, as they appear as slight deviations in the absorption frequency in the THz region.     

New Method of Calculating a Multiplication by using the Generalized Bernstein-Vazirani Algorithm

We present a new method of more speedily calculating a multiplication by using the generalized Bernstein-Vazirani algorithm and many parallel quantum systems. Given the set of real values \(\{a_{1},a_{2},a_{3},\ldots ,a_{N}\}\) and a function \(g:\textbf {R}\rightarrow \{0,1\}\), we shall determine the following values \(\{g(a_{1}),g(a_{2}),g(a_{3}),\ldots , g(a_{N})\}\) simultaneously. The speed of determining the values is shown to outperform the classical case by a factor of \(N\). Next, we consider it as a number in binary representation; M₁ = (g(a₁),g(a₂),g(a₃),…,g(a _N )). By using \(M\) parallel quantum systems, we have \(M\) numbers in binary representation, simultaneously. The speed of obtaining the \(M\) numbers is shown to outperform the classical case by a factor of \(M\). Finally, we calculate the product; \( M_{1}\times M_{2}\times \cdots \times M_{M}. \) The speed of obtaining the product is shown to outperform the classical case by a factor of N × M.     

Photoluminescence of bis(8-hydroxyquinoline) zinc (Znq2) and magnesium (Mgq2)

Absorption and photoluminescence (PL) spectra, PL quantum efficiency, and PL lifetime have been investigated on bis(8-hydroxyquinoline) zinc (Znq₂) and magnesium (Mgq₂) in solutions and powder. Znq₂ and Mgq₂ have the lowest-energy absorption band at 376 and 396 nm in acetonitrile solution, respectively, and emission band with peak at 555 and 480 nm. The PL quantum efficiency is 0.03 and 0.45 for Znq₂ and Mgq₂ in the solution, respectively, while 0.45 and 0.36 in powder. Unlike the case of powders, two PL lifetimes are obtained in solutions. The longer lifetime is attributed to molecule having interaction with its neighboring molecule, while the shorter one to the isolated single molecule.     

Dependence of tracking error characteristics on objective lens shift for in-line-type differential push-pull methods using segmented gratings

In this paper, we present the validity of in-line-type differential push-pull methods using segmented gratings with respect to the radial shift of an objective lens by numerical calculation for the first time. In these differential push-pull methods, the segmented gratings for generating sub spots are divided into two to four regions each with a specific phase value and a width. Tracking error signals are calculated with respect to the objective lens shift under parameter conditions of the widths of the segmented regions. The obtained results show that the grating of the simpler configuration with two regions reveals good compatibility between DVD-R and DVD-RAM compared with those with three or four regions     

Removal of water adsorbed on flouride glass surfaces by NF3 plasma processing

A new method to remove water adsorbed on flouride glass preforms is reported. This method, using NF₃ plasma, can remove surface water on fluoride glasses     

Chemical etching op fission tracks in ethylene-tetrafluoroethylene copolymer

The chemical etching of fission tracks in ethylene-tetrafluoro-ethylene copolymer was studied. Etched holes 3000–4000 Å in diameter was recognized by electron microscopy for a film bombarded by fission fragments in oxygen and etched in a 12N sodium hydroxide solution at 125°C. The radial etching rate at 125°C was 6–8 Å/hr, which is less than 17 Å/hr for polyvinylidene fluoride in the same sodium hydroxide concentration at 85°C. The smaller rate is a reflection of the larger chemical resistivity of ethylene-tetrafluoro-ethylene copolymer than polyvinylidene fluoride.