Langmuir monolayer of artificial pulmonary surfactant mixtures with an amphiphilic peptide at the air/water interface: comparison of new preparations with surfacten (Surfactant TA)

Interfacial behavior was studied on the pulmonary lipid mixture containing a newly designed amphiphilic alpha-helical peptide (Hel 13-5) that consists of 13 hydrophobic and 5 hydrophilic amino acid residues. Moreover, the data obtained were compared with those of commercially available Surfacten (Surfactant TA) which has been clinically used for neonatal respiratory distress syndrome (NRDS) in Japan. Surface pressure (pi)-A and surface potential (DeltaV)-area (A) isotherms were measured for our synthetic preparations and Surfacten. Herein, a mixture of dipalmitoylphosphatidylcholine (DPPC)/egg-phosphatidylglycerol (PG)/palmitic acid (PA) (68:22:9 by weight) was used as the constituent of basic preparations. Monolayers were spread on 0.02 M Tris buffer (pH 7.4) with 0.13 M NaCl at the air/liquid interface, and the surface behavior was investigated by employing the Wilhelmy method, an ionizing electrode method, and fluorescence microscopy (FM). Cyclic compression and expansion isotherms of the prepared materials (or products) (DPPC/PG/PA/Hel 13-5) were examined to confirm the spreading and respreading ability. For the prepared products, a plateau region exists on pi-A and DeltaV-A isotherms at approximately 42 mN m(-1), indicating that Hel 13-5 is squeezed out of surface monolayers together with fluid components (PG) upon lateral compression. That is, the squeeze-out phenomenon induces a 2D-3D phase transformation. In particular, the inclination of the pi-A isotherms at X(Hel 13-5) = 0.1 in the plateau region was almost zero irrespective of the molecular area. As proposed in the earlier report (Nakahara, H.; Lee, S.; Sugihara, G.; Shibata, O. Langmuir 2006, 22, 5792-5803), an observed refluorescence phenomenon was discussed for FM measurements. This phenomenon provides evidence of the squeeze-out motion with fluid molecules. Furthermore, the cyclic pi-A and DeltaV-A isotherms show larger hysteresis areas and better respreading abilities in comparison with the previous ternary systems (DPPC/PG/Hel 13-5 and DPPC/PA/Hel 13-5) that are very important properties in pulmonary functions. FM photographs and the temperature dependence of pi-A and DeltaV-A isotherms suggest that the phase behavior of the present preparation product is very similar to that of Surfacten in terms of the domain size and in parameters such as collapse pressures, maximum DeltaV values, and so on. These results demonstrate that PG and PA even in the present preparations work well for compression-expansion cycling as is the case in the previous ternary systems, and the present preparations show comparable properties to Surfacten in vitro.     

Cerebroside Langmuir monolayers originated from the echinoderms I. Binary systems of cerebrosides and phospholipids

The surface pressure (pi)-area (A), the surface potential (DeltaV)-A and the dipole moment (mu( perpendicular))-A isotherms were obtained for two-component monolayers of two different cerebrosides (LMC-1 and LMC-2) with phospholipids of dipalmitoylphosphatidylcholine (DPPC) and with dipalmitoylphosphatidylethanolamine (DPPE) on a subphase of 0.5 M sodium chloride solution as a function of phospholipid compositions by employing the Langmuir method, the ionizing electrode method, and the fluorescence microscopy. Surface potentials (DeltaV) of pure components were analyzed using the three-layer model proposed by Demchak and Fort. The contributions of the hydrophilic saccharide group and the head group to the vertical component of the dipole moment (mu( perpendicular)) were estimated. The miscibility of cerebroside and phospholipid in the two-component monolayers was examined by plotting the variation of the molecular area and the surface potential as a function of the phospholipid molar fraction (X(phospholipid)), using the additivity rule. From the A-X(phospholipid) and DeltaV(m)-X(phospholipid) plots, partial molecular surface area (PMA) and apparent partial molecular surface potential (APSP) were determined at the discrete surface pressure. The PMA and APSP with the mole fraction were extensively discussed for the miscible system. Judging from the two-dimensional phase diagrams, these can be classified into two types. The first is a positive azeotropic type; the combinations of cerebrosides with DPPC are miscible with each other. The second is a completely immiscible type: the combination of cerebrosides with DPPE. Furthermore, a regular surface mixture, for which the Joos equation was used for the analysis of the collapse pressure of two-component monolayers, allowed calculation of the interaction parameter (xi) and the interaction energy (-Delta epsilon) between the cerebrosides and DPPC component. The miscibility of cerebroside and phospholipid components in the monolayer state was also supported by fluorescence microscopy.     

Mechanisms and kinetics of noncatalytic ether reaction in supercritical water. 1. Proton-transferred fragmentation of diethyl ether to acetaldehyde in competition with hydrolysis

Noncatalytic reaction pathways and rates of diethyl ether in supercritical water are determined in a quartz capillary by observing the liquid- and gas-phase 1H and 13C NMR spectra. The reaction is investigated at two concentrations (0.1 and 0.5 M) in supercritical water at 400 degrees C and over a water-density range of 0.2-0.6 g/cm3, and in subcritical water at 300 and 350 degrees C. The neat reaction (in the absence of solvent) is also studied for comparison at 0.1 M and 400 degrees C. The ether is found to decompose through (i) the proton-transferred fragmentation to ethane and acetaldehyde and (ii) the hydrolysis to ethanol. Acetaldehyde from reaction (i) is consecutively subjected to the unimolecular and bimolecular redox reactions: (iii) the unimolecular proton-transferred decarbonylation forming methane and carbon monoxide, (iv) the bimolecular self-disproportionation producing ethanol and acetic acid, and (v) the bimolecular cross-disproportionation yielding ethanol and carbonic acid. Reactions (ii), (iv), and (v) proceed only in the presence of hot water. Ethanol is produced through the two types of disproportionations and the hydrolysis. The proton-transferred fragmentation is the characteristic reaction at high temperatures and is much more important than the hydrolysis at densities below 0.5 g/cm3. The proton-transferred fragmentation of ether and the decarbonylation of aldehyde are slightly suppressed by the presence of water. The hydrolysis is markedly accelerated by increasing the water density: the rate constant at 400 degrees C is 2.5 x 10(-7) s(-1) at 0.2 g/cm3 and 1.7 x 10(-5) s(-1) at 0.6 g/cm3. The hydrolysis becomes more important in the ether reaction than the proton-transferred fragmentation at 0.6 g/cm3. In subcritical water, the hydrolysis path is dominant at 300 degrees C (0.71 g/cm3), whereas it becomes less important at 350 degrees C (0.57 g/cm3). Acetic acid generated by the self-disproportionation autocatalyzes the hydrolysis at a higher concentration. Thus, the pathway preference can be controlled by the water density, reaction temperature, and initial concentration of diethyl ether.     

Langmuir monolayer properties of perfluorinated double long-chain salts with divalent counterions of separate electric charge at the air-water interface

The novel perfluorinated double long-chain salts with divalent counterions of separate electric charge, 1,1-(1,omega-alkanediyl)-bispyridinium perfluorotetradecane- carboxylate [CnBP(FC14)2 : n = 2, 6, 10, 14], were newly synthesized and their interfacial behavior was investigated by Langmuir monolayer methods. Surface properties [surface pressure (pi)-, surface potential (DeltaV)-, dipole moment (micro perpendicular)-area (A) isotherms] and morphological images of CnBP(FC14)2 monolayers on a subphase of water and on various NaCl concentrations were measured by employing the Wilhelmy method, the ionizing electrode method, fluorescence microscopy (FM), and Brewster angle microscopy (BAM). CnBP(FC14)2 formed a stable monolayer on water at 298.2 K, where these pi-A isotherms shifted to a larger molecular area with increasing charge separation and had no transition point from a disordered phase to an ordered one. On the contrary, the pi-A isotherms on NaCl solutions moved to the smaller areas, showed the transition and higher collapse pressures compared to the pi-A isotherms on water. These results suggested that a sodium chloride subphase induced the condensation of CnBP(FC14)2 molecules upon compression. In addition, it is quite noticeable that a dissociation of CnBP counterion from CnBP(FC14)2 occurs on NaCl solutions, depending on the extent of charge separation. This phenomenon was supported by the changes of the limiting area, transition pressure, collapse pressure, repeated compression-expansion cycle curve, and DeltaV behavior of perfluorotetradecanoic acid (FC14). Furthermore, temperature dependence of these monolayers was investigated, and an apparent molar quantity change on the phase transition was evaluated on 0.15 M NaCl. The morphological behavior of CnBP(FC14)2 and FC14 monolayers was also confirmed by FM and BAM images.     

On Singularity of Energy Measures on Self-Similar Sets II

We provide a criterion for the energy measures of regular Dirichletforms on post-critically finite self-similar sets to be singularwith respect to every self-similar measure. A probabilisticinterpretation of the singularity is also discussed. 2000 MathematicsSubject Classification 60G30 (primary), 28A80, 31C25, 60J60(secondary).     

Investigation of in situ oxalate formation from 2,3-pyrazinedicarboxylate under hydrothermal conditions using nuclear magnetic resonance spectroscopy

We have investigated the assembly of a two-dimensional coordination polymer, Nd(2)(C(6)H(2)N(2)O(4))(2)(C(2)O(4))(H(2)O)(2), that has been prepared from the hydrothermal reaction of Nd(NO(3))(3)·6H(2)O and 2,3-pyrazinedicarboxylic acid (H(2)pzdc). In situ oxalate formation as observed in this system has been been investigated using (1)H and (13)C nuclear magnetic resonance spectroscopy, and a pathway for C(2)O(4)(2-) anion formation under hydrothermal conditions has been elucidated. The oxalate ligands found in Nd(2)(C(6)H(2)N(2)O(4))(2)(C(2)O(4))(H(2)O)(2) result from the oxidation of H(2)pzdc, which proceeds through intermediates, such as 2-pyrazinecarboxylic acid (2-pzca), 2-hydroxyacetamide, 3-amino-2-hydroxy-3-oxopropanoic acid, 2-hydroxymalonic acid, 2-oxoacetic acid (glyoxylic acid), and glycolic acid. The species are generated through a ring-opening that occurs via cleavage of the C-N bond of the pyrazine ring, followed by hydrolysis/oxidation of the resulting species.     

Analyzing consumers’ shopping behavior using RFID data and pattern mining

The development of sensor networks has enabled detailed tracking of customer behavior in stores. Shopping path data which records each customer??s position and time information is attracting attention as new marketing data. However, there are no proposed marketing models which can identify good customers from huge amounts of time series data on customer movement in the store. This research aims to use shopping path data resulting from tracking customer behavior in the store, using information on the sequence of visiting each product zone in the store and staying time at each product zone, to find how they affect purchasing. To discover useful knowledge for store management, shopping paths data has been transformed into sequence data including information on visit sequence and staying times in the store, and LCMseq has been applied to them to extract frequent sequence patterns. In this paper, we find characteristic in-store behavior patterns of good customers by using actual data of a Japanese supermarket.