Critical Evaluation of Kinetic Method Measurements: Possible Origins of Nonlinear Effects

The kinetic method is a widely used approach for the determination of thermochemical data such as proton affinities (PA) and gas-phase acidities (ΔH° _acid ). These data are easily obtained from decompositions of noncovalent heterodimers if care is taken in the choice of the method, references used, and experimental conditions. Previously, several papers have focused on theoretical considerations concerning the nature of the references. Few investigations have been devoted to conditions required to validate the quality of the experimental results. In the present work, we are interested in rationalizing the origin of nonlinear effects that can be obtained with the kinetic method. It is shown that such deviations result from intrinsic properties of the systems investigated but can also be enhanced by artifacts resulting from experimental issues. Overall, it is shown that orthogonal distance regression (ODR) analysis of kinetic method data provides the optimum way of acquiring accurate thermodynamic information.      

Identification tree based on fragmentation rules for structure elucidation of organophosphorus esters by electrospray mass spectrometry

Organophosphorus compounds have played important roles as pesticides, chemical warfare agents and extractors of radioactive material. Structural elucidation of phosphonates poses a particular challenge because their initial forms can be hydrolyzed, thus, degradation products may predominate in samples acquired in the field. The analysis of non‐volatile organophosphorus compounds and their degradation products is possible using electrospray tandem mass spectrometry ESI‐MS/MS. Here, we present a generic strategy that allows the unambiguous identification of substituents for two families of organophosphorus compounds: the phosphonates and phosphates. General fragmentation rules were deduced based on the study of decomposition pathways of 55 organophosphorus esters, including examples found in the literature. Multistage MS (MSⁿ) experiments at high resolution in a hybrid mass spectrometer provide accurate mass measurements, whereas collision‐induced dissociation experiments in a triple quadrupole give access to small fragment ions. The creation of a specific nomenclature for each possible structure of organophosphorus compound, depending on the alkyl side chain linked to the oxygen, was achieved by applying these fragmentation rules. This led to the creation of an ‘identification tree’ based upon the unique consecutive decomposition pathways uncovered for each individual compound. Hence, seven structural motifs were created that orient an unequivocal identification using the ‘identification tree’. Despite the similar structures of the ensemble of phosphate and phosphonate esters, distinct identifications based upon characteristic neutral losses and diagnostic fragment ions were possible in all cases. Copyright © 2013 John Wiley & Sons, Ltd.     

Collision cell pressure effect on CID spectra pattern using triple quadrupole instruments: a RRKM modeling

Control of the ion internal energy in mass spectrometry is needed to establish a workable mass spectral library. The purpose of this study is to understand and to compare the pressure effects on the collision‐induced dissociation (CID) spectrum pattern recorded using triple quadrupole instruments. The monoprotonated Leucine enkephalin [YGGFL, H⁺] was used as a thermometer molecule to calibrate the electrospray ionization (ESI) and the CID internal energies deposited on the molecular species and the time scale of ion decompositions. The survival yield and the ratio of a₄/b₄ fragment ions were mainly monitored. The energy uptake for the ESI source geometry used in our study has no impact on the CID spectrum fingerprint. The collision cell pressure for the [YGGFL, H⁺] has a major influence on the SY curves slope and on the experimental time scale. To demonstrate the pressure effect on internal energy distribution, three models (threshold, thermal and collisional) based on RRKM theory were built using the Masskinetics software. As a result, the limit of each model is discussed, and the investigation demonstrates that the thermal model, using truncated Maxwell‐Boltzmann internal energy distribution, is well‐suited for simulating the experimental data at high pressure widely used in the analytical conditions. Copyright © 2013 John Wiley & Sons, Ltd.     

Incompatible reaction evaluation and accident investigation of various acids in chemical industries

This article covers the incompatible properties of nitric acid (HNO₃) with formic acid (CH₂O₂), and more generally with various acids such as sulfuric acid (H₂SO₄), hydrochloric acid (HCl), and acetic acid (C₂H₄O₂). Differential scanning calorimetry (DSC) was employed to determine the thermal hazard such as heat of decomposition (ΔH _d), exothermic onset temperature (T ₀), etc., in various acids. T ₀ of HNO₃ and CH₂O₂ were determined as 50 °C using DSC. Thus it has been observed that HNO₃ mixed with CH₂O₂ should be prohibited during transportation, storage, and use. And more generally, process safety engineers and operator must take care to handle tanker and storage tank of typical acids in the transportation, storage, and manufacturing process. It is clear that there exists a need to follow and enforce in the chemical industries safety data sheets, globally harmonized system of classification and labeling of chemicals of United Nations (UN), education of safety and health, emergency response system, and process safety management. It is the aim of the present study concerning HNO₃ with various acids.     

钴掺杂Sr1.5La0.5MnO4的合成及高温电化学性能研究

采用EDTA-柠檬酸法合成了中温固体氧化物燃料电池阴极材料Sr_1.5La_0.5Mn_1-xCo_xO₄（SLMCO_x）,并利用粉末X射线衍射（XRD）、X射线光电子能谱（XPS）以及电化学交流阻抗谱（EIS）进行表征。结果表明,该材料与Ce_0.9Gd_0.1O_1.95（CGO）在1 200℃烧结12 h不发生化学反应。随着Co掺入量的增加,氧化物中Mn³⁺和Co²⁺含量增多,晶格氧含量降低,晶格畸变率增大。交流阻抗谱（EIS）测试结果显示,钴的掺杂明显降低电极的极化电阻,其中Sr_1.5La_0.5Mn_0.7Co_0.3O₄阴极在700℃空气中的极化电阻为0.62 Ω·cm²,明显小于Sr_1.5La_0.5MnO₄阴极在750℃的极化电阻（1.5 Ω·cm²）,表明钴掺杂的Sr_1.5La_0.5Mn_1-xCo_xO₄是一种潜在的IT-SOFC阴极材料。     

中温固体氧化物燃料电池阴极材料LaBiMn2O6的制备与性能研究

采用固相法合成了中温固体氧化物燃料电池(IT-SOFCs)阴极材料LaBiMn₂O₆,并利用X射线衍射(XRD)和电化学阻抗谱(EIS)进行表征.结果表明该材料与电解质Ce_0.7Bi_0.3O_1.85(CBO)在1 000 ℃烧结12 h不发生反应.交流阻抗和直流极化测试结果发现,阴极极化电阻随测试温度的增加而逐渐减小,700 ℃空气中的极化电阻为0.71 Ω·cm²;氧分压测试结果显示,在600~700 ℃范围内,电极反应的速率控制步骤为电极上发生的电荷转移反应.电极过电位为85 mV时,700 ℃的阴极电流密度达到 216 mA·cm^-2 ,表明LaBiMn₂O₆是一种潜在的中温固体氧化物燃料电池(IT-SOFCs)阴极材料.     

Instrumental Dependent Dissociations of n-Propyl/Isopropyl Phosphonate Isomers: Evaluation of Resonant and Non-Resonant Vibrational Activations

Structural elucidation and distinction of isomeric neurotoxic agents remain a challenge. Tandem mass spectrometry can be used for this purpose in particular if a “diagnostic” product ion is observed. Different vibrational activation methods were investigated to enhance formation of diagnostic ions through consecutive processes from O,O-dialkyl alkylphosphonates. Resonant and non-resonant collisional activation and infrared multiphoton dissociation (IRMPD) were used with different mass spectrometers: a hybrid quadrupole Fourier transform ion cyclotron resonance (Qh-FTICR) and a hybrid linear ion trap-Orbitrap (LTQ/Orbitrap). Double resonance (DR) experiments, in ion cyclotron resonance (ICR) cell, were used for unambiguous determination of direct intermediate yielding diagnostic ions. From protonated n-propyl and isopropyl O-O-dialkyl-phosphonates, a diagnostic m/z 83 ion characterizes the isopropyl isomer. This ion is produced through consecutive dissociation processes. Conditions to favor its formation and observation using different activation methods were investigated. It was shown that with the LTQ, consecutive experimental steps of isolation/activation with modified trapping conditions limiting the low mass cut off (LMCO) effect were required, whereas with FT-ICR by CID and IRMPD the diagnostic ion detection was provided only by one activation step. Among the different investigated activation methods it was shown that by using low-pressure conditions or using non-resonant methods, efficient and fast differentiation of isomeric neurotoxic agents was obtained. This work constitutes a unique comparison of different activation modes for distinction of isomers showing the instrumental dependence characteristic of the consecutive processes. New insights in the dissociation pathways were obtained based on double-resonance IRMPD experiments using a FT-ICR instrument with limitation at low mass values.

Expanded Mercaptocalixarenes: A New Kind of Macrocyclic Ligands for Stabilization of Polynuclear Thiolate Clusters

The syntheses and properties of expanded 4-tert-butyl-mercaptocalix[4]arenes, in which the methylene linkers are replaced by −CH₂NRCH₂− or −CH₂NRCH₂− and −CH₂NRCH₂CH₂CH₂NRCH₂− units, are described. The new macrocycles were obtained in a step-wise manner, utilizing fully protected, i. e. S-alkylated, derivatives of the oxidation-sensitive thiophenols in the cyclisation steps. Reductive cleavage of the macrobicyclic or macrotricyclic intermediates ( 6 , 7 , 11 ) afforded the free thiophenols (H₄ 8 , H₄ 9 , and H₄ 12 ) in preparative yields as their hydrochloride salts. The protected proligands can exist in two conformations, resembling the “cone” and “1,3-alternate” conformations found for the parent calix[4]arenes. The free macrocycles do not show conformational isomerism, but are readily oxidized forming intramolecular disulfide linkages. Preliminary complexation experiments show that these expanded mercaptocalixarenes can serve as supporting ligands for tetranuclear thiolato clusters.     

Evidence for ion–ion interactions between peptides and anions (HSO4− or ClO4−) derived from high‐acidity acids

The existence of gas‐phase electrostatic ion–ion interactions between protonated sites on peptides ([Glu] Fibrinopeptide B, Angiotensin I and [Asn¹, Val⁵]‐Angiotensin II) and attaching anions (ClO₄^? and HSO₄^?) derived from strong inorganic acids has been confirmed by CID MS/MS. Evidence for ion–ion interactions comes especially from the product ions formed during the first dissociation step, where, in addition to the expected loss of the anion or neutral acid, other product ions are also observed that require covalent bond cleavage (i.e. H₂O loss when several carboxylate groups are present, or NH₃ loss when only one carboxylate group is present). For [[Glu] Fibrinopeptide B + HSO₄]^?, under CID, H₂O water loss was found to require less energy than H₂SO₄ departure. This indicates that the interaction between HSO₄^? and the peptide is stronger than the covalent bond holding the hydroxyl group, and must be an ion–ion interaction. The strength and stability of this type of ion‐pairing interaction are highly dependent on the accessibility of additional mobile charges to the site. Positive mobile charges such as protons from the peptide can be transferred to the attaching anion to possibly form a neutral that may depart from the complex. Alternatively, an ion–ion interaction can be disrupted by a competing proximal additional negatively charged site of the peptide that can potentially form a salt bridge with the positively charged site and thereby facilitate the attaching anion's departure. Copyright © 2014 John Wiley & Sons, Ltd.     

Comparison of the activation time effects and the internal energy distributions for the CID,PQD and HCD excitation modes

Reproducibility among different types of excitation modes is a major bottleneck in the field of tandem mass spectrometry library development in metabolomics. In this study, we specifically evaluated the influence of collision voltage and activation time parameters on tandem mass spectrometry spectra for various excitation modes [collision‐induced dissociation (CID), pulsed Q dissociation (PQD) and higher‐energy collision dissociation (HCD)] of Orbitrap‐based instruments. For this purpose, internal energy deposition was probed using an approach based on Rice–Rampserger–Kassel–Marcus modeling with three thermometer compounds of different degree of freedom (69, 228 and 420) and a thermal model. This model treats consecutively the activation and decomposition steps, and the survival precursor ion populations are characterized by truncated Maxwell–Boltzmann internal energy distributions. This study demonstrates that the activation time has a significant impact on MS/MS spectra using the CID and PQD modes. The proposed model seems suitable to describe the multiple collision regime in the PQD and HCD modes. Linear relationships between mean internal energy and collision voltage are shown for the latter modes and the three thermometer molecules. These results suggest that a calibration based on the collision voltage should provide reproducible for PQD, HCD to be compared with CID in tandem in space instruments. However, an important signal loss is observed in PQD excitation mode whatever the mass of the studied compounds, which may affect not only parent ions but also fragment ions depending on the fragmentation parameters. A calibration approach for the CID mode based on the variation of activation time parameter is more appropriate than one based on collision voltage. In fact, the activation time parameter in CID induces a modification of the collisional regime and thus helps control the orientation of the fragmentation pathways (competitive or consecutive dissociations). Copyright © 2014 John Wiley & Sons, Ltd.