Synthesis of stable and cell-type selective analogues of cyclic ADP-ribose, a Ca(2+)-mobilizing second messenger. Structure--activity relationship of the N1-ribose moiety

We previously developed cyclic ADP-carbocyclic ribose (cADPcR, 2) as a stable mimic of cyclic ADP-ribose (cADPR, 1), a Ca(2+)-mobilizing second messenger. A series of the N1-ribose modified cADPcR analogues, designed as novel stable mimics of cADPR, which were the 2"-deoxy analogue 3, the 3"-deoxy analogue 4, the 3"-deoxy-2"-O-(methoxymethyl) analogue 5, the 3"-O-methyl analogue 6, the 2",3"-dideoxy analogue 7, and the 2",3"-dideoxydidehydro analogue 8, were successfully synthesized using the key intramolecular condensation reaction with phenylthiophosphate-type substrates. We investigated the conformations of these analogues and of cADPR and found that steric repulsion between both the adenine and N9-ribose moieties and between the adenine and N1-ribose moieties was a determinant of the conformation. The Ca(2+)-mobilizing effects were evaluated systematically using three different biological systems, i.e., sea urchin eggs, NG108-15 neuronal cells, and Jurkat T-lymphocytes. The relative potency of Ca(2+)-mobilization by these cADPR analogues varies depending on the cell-type used: e.g., 3"-deoxy-cADPcR (4) > cADPcR (2) > cADPR (1) in sea urchin eggs; cADPR (1) > cADPcR (2) approximately 3"-deoxy-cADPcR (4) in T-cells; and cADPcR (2) > cADPR (1) > 3"-deoxy-cADPcR (4) in neuronal cells, respectively. These indicated that the target proteins and/or the mechanism of action of cADPR in sea urchin eggs, T-cells, and neuronal cells are different. Thus, this study represents an entry to cell-type selective cADPR analogues, which can be used as biological tools and/or novel drug leads.     

Gas permeation of porous organic/inorganic hybrid membranes

Selective gas permeation of porous organic/inorganic hybrid membranes via sol-gel route and its thermal stability are described. Separation performance of the hybrid membrane was improved compared with porous membranes governed by the Knudsen flow, and gas permeability was still much higher than that through nonporous membranes. Additionally, it was shown that these membranes were applicable at higher temperatures than organic membranes.SEM observation demonstrated that the thin membrane was crack-free. Nitrogen physisorption isotherms showed the pore size was in the range of nanometers. Gas permeability through this membrane including phenyl group was in the range of 10^–8 [cc(STP) cm/(cm² s cmHg)] at 25°C. The ratios of O₂/N₂ and CO₂/N₂ were 1.5 and 6.0, respectively, showing the permeation was not governed by the Knudsen flow. The permeability decreased as the temperature increased. Furthermore, the specific affinity between gas molecules and surface was observed not only in the permeation data of the hybrid membranes but in the physisorption data. These results suggested that the gas permeation through the hybrid membrane was governed by the surface flow mechanism.Thermal analysis indicated that these functional groups were still stable at higher temperatures. The phenyl group especially remained undamaged even at 400°C.     

Radiation-induced terpolymerization of methyl α,β,β-trifluoroacrylate with tetrafluoroethylene and α-olefin

Radiation-induced terpolymerizations of methyl α,β,β-trifluoroacrylate (MTFA) with tetrafluoroethylene (TFE) and α-olefins, such as ethylene, propylene, and isobutylene, were carried out in bulk at 25°C for the purpose of controlling the content of ester group in the MTFA-α-olefin alternating copolymers. These monomers polymerized to form alternating terpolymers which contained 50 mole % α-olefin in a wide range of monomer composition. The content of MTFA, namely, the ester group in polymer, can be varied without destruction of the alternating structures between fluoroolefins (MTFA, TFE) and α-olefin by changing the MTFA/TFE ratio in the monomer mixture. The relative reactivities of MTFA and TFE in the terpolymerization were discussed according to kinetic treatments by free propagating and complex mechanisms. The relation between the MTFA/TFE ratio in the monomer mixture and that in terpolymer was explained favourbly by the complex mechanism. It was also concluded that the relative reactivity of MTFA is larger than that of TFE in the terpolymerizations.     

Formulation study for lansoprazole fast-disintegrating tablet. II. Effect of triethyl citrate on the quality of the products

The purpose of this study was to develop enteric-coated microgranules for the lansoprazole fast-disintegrating tablet (LFDT), which is a rapidly disintegrating tablet containing enteric-coated microgranules. In our previous study, it was clarified that sufficient flexibility of the enteric layer was achieved by the optimized combined ratio of methacrylic acid copolymer dispersion to ethyl acrylate-methyl methacrylate copolymer dispersion and adding the optimized concentration of triethyl citrate to reduce the damage during the compression process. However, since triethyl citrate has an unpleasant bitter taste and is especially incompatible with lansoprazole, it adversely affects the taste and stability of lansoprazole in the enteric-coated microgranules. The enteric layer containing macrogol 6000 was proven useful to improve the unpleasant bitter taste and stability of lansoprazole, because macrogol 6000 does not have an unpleasant bitter taste and is more compatible than triethyl citerate. By covering the inner (first enteric layer) and outer side (third enteric layer) of the enteric layer containing triethyl citrate (second enteric layer) with the enteric layer containing macrogol 6000, we resolved the stability problem of lansoprazole and the unpleasant bitter taste. Finally, we developed enteric-coated microgranules comprising seven layers: 1) core, 2) active compound layer, 3) intermediate layer, 4) first enteric layer, 5) second enteric layer, 6) third enteric layer, and 7) over coating layer. The enteric-coated microgranules have the multiple functions of reducing the damage to the enteric layer during the compression process, improving the stability of lansoprazole, and masking the unpleasant bitter taste.     

Studies on Fe complexes produced by yeast. IV. Mechanism of Fe transport from an Fe(II)-oligosaccharide complex across the mucosal membrane of the rat intestine

The mechanism of Fe transport across the rat duodenal membrane from an Fe(II)-oligosaccharide complex (designated B1-c) produced in wine by yeast and showing high hematopoietic activity in rats was examined. The Fe uptake from B1-c by brush border membrane (BBM) vesicles isolated from the rat intestine was based mainly on the Fe binding to membrane components which were suggested to be inside the vesicles. Evidence that Fe was transported into the vesicles by a special transport system other than simple diffusion was obtained by observing saturation kinetics under conditions of isotope exchange, and temperature and pH dependence. This Fe uptake was not inhibited by any metal ions tested, including inorganic Fe(II), and the BBM vesicles from the duodenum had a higher Fe uptake than those from the other parts of the small intestine. Furthermore, the BBM vesicles isolated from rats with Fe deficiency showed a significantly increased Fe uptake. The Km value for B1-c uptake was 0.16 mM, lower than the values for FeSO4 and ferrous ascorbate. These results suggest that a special transport system selective for B1-c may be present on the mucosal membrane. B1-c was taken up by the BBM vesicles in the form of Fe-oligosaccharide complex. From the preloaded vesicles, B1-c was released temperature- and pH-dependently.(ABSTRACT TRUNCATED AT 250 WORDS)     

Reactive oligomers. I. Preparation and polymerization of ethylene glycol bis(methyl fumarate)

Ethylene glycol bis(methyl fumarate) (EGBMF) was prepared as a new type of divinyl compound and reactive oligomer: a needle crystal, m.p. 104.5°C. Homopolymerization of EGBMF was carried out in dioxane with 0.1 mol/L AIBN at [M] = 1 mol/L and 60°C; the rate of polymerization was estimated to be 4.44 × 10^?6 mol/L s in a good agreement with diethyl fumarate (DEF). The cyclization constant K_c was obtained as 1.64 mol/L, being rather low compared with diallyl oxalate which is 1,9-diene having two ester groups analogous to EGBMF. Gelatin occurred at about 35% conversion. Finally, the copolymerization of EGBMF (M₁) with diallyl phthalate (DAP) (M₂) is tentatively explored with the intention of the improvement of allyl resins in mechanical properties; remarkable rate enhancement was observed for copolymerization. The monomer reactivity ratios were estimated to be r₁ = 0.96 and r₂ = 0.025, the r₁ value being reduced compared with the DEF-DAP copolymerization system. These results are discussed from the standpoint of steric effect on the polymerization of fumarate as an internal olefin.     

Photodynamic Efficiency of Protoporphyrin IX: Comparison of Endogenous Protoporphyrin IX Induced by 5-Aminolevulinic Acid and Exogenous Porphyrin IX

Abstract— Photodynamic efficiency of protoporphyrin IX (PP) accumulated in HeLa cells by the incubation of PP with HeLa cells was compared with that of accumulated PP formed from 5-aminolevulinic acid (ALA) as a precursor. The ALA-induced PP was photodynamically more efficient than exogenous PP. The difference is caused by monomelic PP concentration and PP localization site in HeLa cells. Exogenous PP was accumulated mainly in plasma membrane, and the membrane was strongly damaged by irradiation. The ALA-induced PP was selectively accumulated in mitochondria and inactivated the mitochondrial function by irradiation.     

A theory of adsorption kinetics with time delay and its application to overshoot and oscillation in the surface tension of gelatin solution

A theory of adsorption kinetics with time delay [Ohshima et al. (1992) Colloid Polym. Sci. 270:707] is developed and applied to the surface tension of a polymer solution. It is found that the general appearance of the overshoot and oscillation in the time course of the surface tension of aqueous gelatin solution observed by Sato and Ueberreiter [(1979) Makromol. Chem. 180:829, 1107; (1979) Polym. Prepr. Am. Chem. Soc. Div. Polym. Chem. 20:907) can be explained by the present theory.     

Resistance properties of a macroporous silica-based N,N,N′,N′-tetraoctyl-3-oxapentane-1,5-diamide-impregnated polymeric adsorption material against nitric acid, temperature and γ-irradiation

The resistance of a novel silica-based N,N,N′,N′-tetraoctyl-3-oxapentane-1,5-diamide (TODGA) polymeric adsorption material (TODGA/SiO₂-P) against nitric acid, temperature and γ-irradiation had been investigated. The adsorption property of the treated TODGA/SiO₂-P was evaluated by a 3 M HNO₃ solution containing 0.01 M Nd(III). It was found that both 3 and 0.01 M HNO₃ concentrations did not decrease the stability of TODGA/SiO₂-P at 25°C. The quantity of TODGA leaked from TODGA/SiO₂-P was equivalent to its solubility in the corresponding HNO₃ aqueous solution. The effect of 3 M HNO₃ on the leakage of TODGA at 80°C was significantly higher than that in 0.01 M HNO₃ as well as in all cases at 25°C. The amount of Nd(III) adsorbed towards the treated TODGA/SiO₂-P was determined in the range of 0.143–0.148 mmol/g for the HNO₃ concentration effect and 0.142–0.0506 mmol/g for the temperature effect. γ-Irradiation showed a more noticeable destruction effect on TODGA/SiO₂-P. The content of TODGA leaked increased with an increase in the γ-irradiation dose (ID) from 1.06 to 3.72 MGy in terms of the linear equation [TODGA]=794.5ID+84.0. The amount of Nd(III) adsorbed onto the irradiated TODGA/SiO₂-P decreased rapidly from 0.134 to 0.0438 mmol/g, which was lower than 0.153 mmol/g, the adsorption of fresh TODGA/SiO₂-P for Nd(III), according to the equation Q_Nd(III)=−0.0301ID+0.160, showing that a large quantity of TODGA leaked from TODGA/SiO₂-P. The adsorbed amount of Nd(III) decreased obviously in this order: the HNO₃ concentration effect, temperature effect and γ-irradiation.     

A Puckered Singlet Cyclopentane‐1,3‐diyl: Detection of the Third Isomer in Homolysis

In the photochemical denitrogenation of 1,4‐diaryl‐2,3‐diazabicyclo[2.2.1]heptane ( AZ6 ) bearing sterically hindered substituents, a curious new absorption band at about 450 nm was observed under low‐temperature matrix conditions, together with the previously well‐characterized planar singlet diradical pl‐¹ DR6 with λ_max=≈580 nm. The 450 nm species was electron paramagnetic resonance (EPR)‐silent. Instead of generating the planar diradical pl‐¹ DR6 and the precursor azoalkane AZ6 upon warming, the ring‐closed bicyclo[2.1.0]pentane derivative SB6 , that is, the AZ6 denitrogenation product was identified. Based on product analysis, low‐temperature spectroscopic observations, high‐level quantum‐mechanical computations, viscosity effect, and laser‐flash photolysis, the puckered singlet diradicaloid puc‐¹ DR6 was assigned to the new 450 nm absorption. The latter was detected experimentally at the same time as the planar singlet diradical pl‐¹ DR6 . Sterically demanding substituents as well as viscosity impediments were essential for the detection of the experimentally hitherto unknown puckered singlet cyclopentane‐1,3‐diyl diradicaloid puc‐¹ DR6 , that is, the third isomer in homolysis. The present findings should stimulate future work on the mechanistically fascinating stereoselectivity documented in the formation of bicyclo[2.1.0]pentanes during the 2,3‐diazabicyclo[2.2.1]heptane denitrogenation.