Electrical and interface state density properties of polyaniline–poly-3-methyl thiophene blend/p-Si Schottky barrier diode

We have formed conjugated polymeric aniline–thiophene organic material on p-Si substrate by adding polyaniline–poly-3-methyl thiophene blend solution in acetonitrile on top of a p-Si substrate and then evaporating the solvent. It has been seen that the forward bias current–voltage (I–V) characteristics of polyaniline–poly-3-methyl thiophene blend/p-Si/Al with a barrier height value of 0.60 eV and an ideality factor value of 3.37 showed rectifying behaviour at room temperature. The polyaniline–poly-3-methyl thiophene blend/p-Si/Al Schottky barrier diode showed non-ideal I–V behaviour with the value of ideality factor greater than unity that could be ascribed to the interfacial layer, interface states and series resistance. Furthermore, Cheung's functions and modified Norde's function were used to extract the diode parameters including ideality factor, barrier height and series resistance. It has been seen that there is a good agreement between the barrier height values from all methods. However, the values of series resistance obtained from Cheung's functions is higher than the values obtained from Norde's functions. The energy distribution of interface states density, determined from forward bias current–voltage (I–V) characteristic technique at room temperature, increases exponentially with bias from 2.81 × 10¹⁶ cm^?2 eV^?1 in (0.73–E_v) eV to 1.14 × 10¹⁷ cm^?2 eV^?1 in (0.48–E_v) eV.     

Synthesis, spectroscopic and electrochemical characteristics of a novel Schiff-base from saccharin and tryptophan

In the present work, a novel Schiff-base was synthesized by the reaction of saccharin with tryptophan and characterized by elemental analysis as well as UV-Vis, FT-IR, ¹H NMR spectroscopic data. The voltammetric behavior of Schiff-base was also studied on the hanging mercury drop electrode (HMDE) by using Square-Wave Voltammetry (SWV) and Cyclic Voltammetry (CV) techniques. The voltammograms of the Schiff-base exhibited two irreversible reduction peaks in Britton-Robinson buffer (pH 7.0–10.0) for the potential range from 0.0 V to ?1.4 V. These peaks which appeared at more positive potentials than the reduction peaks of tryptophan and saccharin, may be assigned to the cathodic reductions of C-N⁺ and >C=N- moieties of Schiffbase.     

Numerical simulation of partially coherent broadband optical imaging using the finite-difference time-domain method

Rigorous numerical modeling of optical systems has attracted interest in diverse research areas ranging from biophotonics to photolithography. We report the full-vector electromagnetic numerical simulation of a broadband optical imaging system with partially coherent and unpolarized illumination. The scattering of light from the sample is calculated using the finite-difference time-domain (FDTD) numerical method. Geometrical optics principles are applied to the scattered light to obtain the intensity distribution at the image plane. Multilayered object spaces are also supported by our algorithm. For the first time, numerical FDTD calculations are directly compared to and shown to agree well with broadband experimental microscopy results.     

Microstructural properties of sintered Al–Cu–Mg–Sn alloys

A non-commercial Al4Cu0.5Mg alloy has been used for investigating the effects of the elemental Sn additions. Uniaxial die compaction response of the alloys in terms of green density was examined, and the results showed that Sn addition has no effect when compacting conducted under high pressures. In total, 93–95% green density was achieved with an applied pressure of 400 MPa. Thermal events occurring during the sintering of the emerging alloys were studied by using differential scanning calorimetry (DSC). First thermal event on the DSC analysis of the Al4Cu0.5Mg1Sn alloy is the melting of elemental Sn, whereas for Al4Cu0.5Mg alloy, it is the formation of Al–Mg liquid nearly at 450 °C. Also it is clearly seen on the DSC analysis that Sn addition led to an increase in the formation enthalpy of Al–Mg liquid phase. High Sn content and high sintering temperature (620 °C), therefore high liquid-phase content, caused decrease on the mechanical properties due to thick intergranular phases and grain coarsening. Highest transverse rupture strength and hardness values were obtained from Al4Cu0.5Mg0.1Sn alloy sintered at 600 °C and measured as 390 MPa and 73 HB, respectively.     

Development of a Diamond Nanoparticles-based Nanosensor for Detection and Determination of Antiviral Drug Favipiravir

This study developed a nanosensor for the detection and determination of favipiravir, a presumed drug that has potential therapeutic efficacy in treating COVID-19 patients, from tablets and serum samples. This nanosensor was obtained by adding the optimum amount of diamond nanoparticles into carbon paste. For the determination of favipiravir adsorptive stripping differential pulse (AdSDPV) and adsorptive stripping square wave voltammetry (AdSSWV) were used. Limit of detection values were found as 4.83×10⁻⁹ M and 2.44×10⁻⁷ M for bulk and 5.18×10⁻⁸ M and 4.38×10⁻⁸ M for serum samples using AdSDPV and AdSSWV, respectively. Recovery studies made of the tablet and serum produced satisfactory results.     

In-house validation for analytical methods and quality control for risk evaluation of chlordecone in food

Chlordecone was used until 1993 as a pesticide in the banana plantation of Martinique and Guadeloupe (French Antilles) against the root borer. This organochlorine pesticide was lipophilic, remnant, and toxic for human beings with both acute and chronic effects. Chlordecone was strongly absorbed and stored in soil and weakly decomposed in environment. Surveys conducted in 2001 revealed its presence in soil, rivers, and domestic food products. Local food (fruits and vegetables, cattle, poultry, and fish) was growing on soils, widely contaminated by chlordecone, used in the past as banana plantations. In 2003, French Administration asked for a risk evaluation for the Antilles population. The French Agency for Food Safety, proposed a Provisional Tolerable Daily Intake of 0.0005?mg?kg^?1?b.w.?day^?1, and an Acute Reference Dose of 0.01?mg?kg^?1?b.w.?day^?1, based on a toxicological risk assessment. The French National Reference Laboratory for pesticides has carried out two analytical methods, one for food of animal origin and another for food of fruit and vegetable origin. These methods were validated in the reference laboratory and dispatched to 13 laboratories for a proficiency test before the launch of two studies on Martinique and Guadeloupe food. About 900 samples from Martinique were sent to the network of laboratories for analysis of chlordecone. Performance parameters obtained through the proficiency test were briefly reported. The quality control test proposed in this study was discussed to shed light on the true variability achievable by intra-laboratory and inter-laboratory analysis. The limits of conventional quality-control procedures were discussed, and a process was proposed in order to get better confidence in analytical results.     

Optimization Strategy for Isocratic Separation of α-Aspartame and Its Breakdown Products by Reversed Phase Liquid Chromatography

α-Aspartame (L-α-aspartyl-L-phenylalanine methyl ester) is increasingly being used in wide variety of commonly consumed food products. This structure contains ester and peptide bonds. The ester linkage may hydrolyze to produce L-α-aspartyl-L-phenylalanine or cyclohydrolyze to produce the corresponding diketopiperazine ring. This ring can open to form L-α-aspartyl-L-phenylalanine and ultimately this compound can hydrolyze to L-phenylalanine and L-aspartic acid. The pH, buffer type, concentration, the presence of water and temperature are other important factors affecting its stability. Because α-aspartame can lose its sweetness under these conditions determination of aspartame and its breakdown products is extremely important for diet foods quality. The optimum mobile phase for the chromatographic separation was found to be acetonitrile-water (20:80, ν/ν) with 5.10^?3 M hexanesulfonic acid and a pH of 2.6.     

Quantitative analysis of sea-bed sediments from Eastern Black Sea by EDXRF spectrometry

Sea-bed sediments from Eastern Black Sea have been analyzed for their Fe, Ba and Sr contents using the methods of standard addition and energy dispersive X-ray fluorescence (EDXRF). Samples were prepared from powder sifted by a 200 mesh sieve. An annular 100 mCi²⁴¹Am radioactive source emitting 59.543 keV photons was used for excitation and a Ge(Li) detector, which has a 190 eV FWHM for 5.9 keV photons was used for intensity measurements. 2048 channels of the MCA are employed for 20 or 30 min. Dried and ground sea-bed sediments are found to contain 2.95–7.50% Fe, 0.032–0.268% Ba and about 73–273 ppm Sr. These results agree with those obtained via atomic absorption methods.     

Measurement of absolute intensity of 1001 keV gamma-ray of 234mPa

The sorption behavior of ²³⁵U fission fission products ⁹⁹Mo and ¹³²Te was studied through batch and dynamic experiments when they were dissolved in 1 to 7M HNO₃ solutions. It was found that ⁹⁹Mo is always totally adsorbed on hydrated SnO₂, while ¹³²Te is rather weakly adsorbed, therefore they can be separated from each other although ¹³²Te in the solution still remains contaminated with other radionuclides as well as ⁹⁹Mo does in the solid.