Synthesis and properties of 1,3,5-benzene periodic mesoporous organosilica (PMO): novel aromatic PMO with three point attachments and unique thermal transformations

A new aromatic periodic mesoporous organosilica material containing benzene functional groups that are symmetrically integrated with three silicon atoms in an organosilica mesoporous framework is reported. The material has a high surface area, well-ordered mesoporous structure and thermally stable framework aromatic groups. The functional aromatic moieties were observed to undergo sequential thermal transformation from a three to two and then to a one point attachment within the framework upon continuous thermolysis under air before eventually being converted to periodic mesoporous silica devoid of aromatic groups at high temperatures and longer pyrolysis times. The mesoporosity of the material was characterized by powder X-ray diffraction (PXRD), transmission electron microscopy (TEM), and nitrogen porosimetry, whereas the presence and transformation of the aromatic groups in the walls of the materials were characterized by solid-state NMR spectroscopy, mass spectrometry, and thermogravimetric analysis. The attachment of a benzene ring symmetrically onto three siloxanes of the framework was used advantageously as a cross-linker to enhance the thermal stability of the organic group. Some of these properties are investigated in comparison with other aromatic PMOs that have only two point attachments and an amorphous phenylsilica gel that has only one point attachment. The successful synthesis of the first aromatic PMO with its organic group attached within the framework through more than two points is an important step toward the synthesis of PMOs having organic groups with more complex and multiple attachments within the framework.     

Development of a fluoride-responsive amide bond cleavage device that is potentially applicable to a traceable linker

A fluoride-responsive (FR) amino acid that induces amide bond cleavage upon the addition of a fluoride was developed, and it was applied to an FR traceable linker. By the use of an alkyne-containing peptide as a model of an alkynylated target protein of a bioactive compound, introduction of the FR traceable linker onto the peptide was achieved. Subsequent fluoride-induced cleavage of the linker followed by labeling of the released peptide derivative was also conducted to examine the potential applicability of the FR traceable linker to the enrichment and labeling of alkynylated target molecules.     

Two New Triterpene Saponins from Acanthophyllum laxiusculum

Two new triterpene glycosides, 1 and 2 , together with three known ones, were isolated from roots of Acanthophyllum laxiusculum Schiman ‐Czeika . The structures of the new compounds were established by extensive 1D‐ and 2D‐NMR spectroscopic experiments and MS analyses as 23‐O‐β‐D ‐galactopyranosylgypsogenic acid 28‐O‐{β‐D ‐glucopyranosyl‐(1→2)‐6‐O‐[4‐carboxy‐3‐hydroxy‐3‐methyl‐1‐oxobutyl]‐β‐D ‐glucopyranosyl‐(1→6)}‐[β‐D ‐glucopyranosyl‐(1→3)]‐β‐D ‐galactopyranosyl ester ( 1 ) and gypsogenic acid 28‐O‐{β‐D ‐glucopyranosyl‐(1→2)‐6‐O‐[4‐carboxy‐3‐hydroxy‐3‐methyl‐1‐oxobutyl]‐β‐D ‐glucopyranosyl‐(1→6)}‐[β‐D ‐glucopyranosyl‐(1→3)]‐β‐D ‐galactopyranosyl ester ( 2 ).     

Sensitive HPLC–fluorescence detection of morphine labeled with DIB-Cl in rat brain and blood microdialysates and its application to the preliminarily study of the pharmacokinetic interaction between morphine and diclofenac

A sensitive high-performance liquid chromatography (HPLC)–fluorescence method for determination of morphine (Mor) in rat brain and blood microdialysates was developed using 4-(4,5-diphenyl-1H-imidazol-2-yl)benzoyl chloride (DIB-Cl) as a label. Mor was labeled with DIB-Cl under mild reaction conditions (at room temperature for 10 min). The separation of DIB-Mor was carried out on an octadecylsilica (ODS) column with CH₃CN/0.1 M acetate buffer (pH 5.4) within 14 min. The detection limits of Mor in brain and blood microdialysates at a signal-to-noise ratio of 3 were 0.4 and 0.6 ng mL⁻¹, respectively. The proposed method was successfully applied to the preliminarily study of potential pharmacokinetic interaction between Mor and diclofenac.     

Electrochemical characterization of negative electrodes consisting of surface-modified Zr0.9Ti0.1(Ni1.1Co0.1Mn0.5V0.2Cr0.1)x Laves-phase alloys

Laves-phase hydrogen storage alloy has a high potential for use as negative electrode material as alternative for the misch-metal-based material. In order to improve the energy density and the rate capability of negative electrode, chemical and mechanical modification of Lavesphase alloy with different stoichiometric ratios was carried out. Discharge capacity and high-rate dischargeabilty was evaluated by electrochemical methods and the characterization of Laves-phase alloy was made by X-ray diffraction, SEM observation and PCT measurement. The best result in discharge capacity could be obtained for stoichiometric Laves-phase alloy with a composition of Zr_0.9Ti_0.1Ni_1.1Co_0.1Mn_0.5V_0.2Cr_0.1 by boiling in 10 M KOH solution. On the other hand, the high-rate dischargeability was increased remarkably by introducing mechanical grinding before alkali treatment. The cause for improved performance was discussed on the basis of thermodynamic stability of metal hydride and changes in crystal structure and surface morphology influencing on diffusion coefficient and diffusion path length of hydrogen.     

Secondary metabolites from the roots of Paronychia chionaea

Two novel secondary metabolites, compounds (1-2) were isolated from the roots of Paronychia chionaea. On the basis of spectroscopic data including 1D and 2D NMR experiments (COSY, TOCSY, HSQC, and HMBC), and mass spectroscopy, their structures were established as 6-C-[alpha-L-arabinopyranosyl-( 1 --> 2)-beta-D-glucopyranosyl]-7-O-[beta-D-glucopyranosyl]-luteolin 3'-methyl ether (1), and 2-(methoxy)-2-(3,5-dimethoxy 4-hydroxyphenyl)-ethane-1,2-diol 1-O-beta-D-glucopyranoside (2).     

Carbamoylimidazolium and thiocarbamoylimidazolium salts: novel reagents for the synthesis of ureas, thioureas, carbamates, thiocarbamates and amides

Carbamoylimidazolium salts act as efficient N,N-disubstituted carbamoylating reagents. These salts are readily prepared by the sequential treatment of secondary amines with N,N′-carbonyldiimidazole (CDI) and iodomethane. The carbamoylimidazolium salts are more efficient carbamoyl transfer reagents than the intermediate carbamoylimidazoles, as a result of the ‘imidazolium’ effect. Kinetic studies on the base promoted hydrolysis of both carbamoylimidazoles and carbamoylimidazolium salts reveal over a hundred-fold rate acceleration. The salts react with amines, thiols, phenols/alcohols, and carboxylic acids in high yields, without the need for subsequent chromatographic purification of the products, producing ureas, thiocarbamates, carbamates, and amides, respectively. Analogous thiocarbamoylimidazolium salts were also synthesized from secondary amines and N,N′-thiocarbonyldiimidazole (TCDI), followed by methylation with iodomethane.     

Substrate dependence in aqueous Diels-Alder reactions of cyclohexadiene derivatives with 1,4-benzoquinone

A reactivity difference based on the position of substituents on cyclohexa-1,3- diene was observed for the title reaction. The effect of water as solvent was more distinct for 1-methyl-4-isopropylcyclohexa-1,3-diene than for 2-methyl-5-isopropylcyclohexa- 1,3-diene or non-substituted cyclohexa-1,3-diene. The effect of NaCl (salting-out) and guanidium chloride (salting-in) was also large for 1-methyl-4-isopropylcyclohexa-1,3- diene.     

PVTx relationships and solid-liquid equilibria for the m-xylene-p-xylene system under high pressures

PVTx relationships of the m-xylene-p-xylene system have been measured with a glass piezometer at 283.15 and 298.15 K and pressures up to 200 MPa, or up to the point of solidification of m-xylene where this occurred at a lower pressure. Freezing pressures of m-xylene were observed as a discontinuity in the volume at increasing pressure. Approximate solid-liquid equilibria under high pressures were obtained from the freezing pressure measurement. The Carnahan-Starling-van der Waals (CS-vdW) equation of state was used to correlate the PVTx data. The solid-liquid equilibria under high pressures were calculated with the CS-vdW equation of state for the liquid phase and a simple equation of state for the solid phase. In order to test the validity of the calculation method, the solid-liquid equilibrium relationships of the benzene-cyclohexane system were also calculated. It was found that the solid molar volume should be treated as a function of temperature and/or pressure to fit the experimental data.     

Molecular orientation and mechanical anisotropy of polypropylene sheet containing N,N′‐dicyclohexyl‐2,6‐naphthalenedicarboxamide

Effect of mixing and processing conditions at T‐die extrusion on the structure and mechanical properties is studied for isotactic polypropylene (PP) containing a small amount of β‐form nucleating agent, N,N′‐dicyclohexyl‐2,6‐naphthalenedicarboxamide. It is found that trigonal β crystals are predominantly formed in the extruded samples containing the nucleating agent irrespective of the mixing and processing conditions, leading to the marked mechanical toughness. On the contrary, the molecular orientation is significantly affected by the mixing and processing conditions. In particular, it should be noted that PP molecules in the extruded sheet which was mixed at high temperature (260 °C) and extruded at low temperature (200 °C) orient perpendicular to the applied flow direction. As a result, the sheet shows anomalous mechanical anisotropy. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 424–433, 2009