N6H6结构和性质的理论研究

采用密度泛函理论的b3lyp方法在6-311＋＋G**基组上对15种分子式为N₆H₆的氮氢化合物进行了理论计算, 并且应用了自然键轨道理论(Nature Bond Orbital, NBO)和分子中的原子理论(Atoms In Molecules, AIM)分析了这些化合物的成键特征和相对稳定性. NBO分析表明N原子孤对电子到相邻的氮氮键的超共轭作用是影响氮氮键长变化的主要因素, AIM计算的氮氮键的键临界点电荷密度与键长呈反比关系. 而且, NBO的立体和超共轭分析表明立体交换排斥能和超共轭作用对这些分子的相对稳定性起了重要作用. G3MP2计算结果表明氮氢化合物的生成热均为正, 并且环状分子的能量和生成热都高于链状分子.     

CH4, CO2和H2O在非金属原子修饰石墨烯表面的吸附

煤层气(矿井瓦斯)是一种有望替代传统化石燃料，如煤、石油和天然气的非常规气体. 作为可得的清洁能源，它的利用被认为是节能和经济的选择. 在本工作中，非金属原子X(X=H，O，N，S，P，Si，F，Cl)修饰的石墨烯(Gr)被用来代表具有结构异性的煤表面模型. 通过密度泛函理论系统地研究了煤层气组分Y(Y=CH₄，CO₂，H₂O)在非金属原子修饰石墨烯上的吸附作用. 结果表明Y在非金属原子修饰石墨烯上的吸附均为物理吸附. 态密度和差分电荷密度共同表明了这种弱的相互作用.其中，H和Cl对CH₄的作用较大； N、O、F、Cl对CO₂的作用较强； N，Cl对H₂O的影响不容忽视. 总的来说，吸附能大小依次为：H₂O>CO₂>CH₄. 因此，在CH₄富集的煤层里注入H₂O或CO₂可以与CH₄形成竞争吸附，进而提高煤层气采收率. 本工作提供了在分子水平下煤层气与非金属原子修饰石墨烯之间的相互作用的详情，并为煤层瓦斯的开采与分离提供了有用的信息.     

Fine-tuning water exchange on Gd(III) poly(amino carboxylates) by modulation of steric crowding

In the objective of optimizing water exchange rate on stable, nine-coordinate, monohydrated Gd(III) poly(amino carboxylate) complexes, we have prepared monopropionate derivatives of DOTA4- (DO3A-Nprop4-) and DTPA5- (DTTA-Nprop5-). A novel ligand, EPTPA-BAA(3-), the bisamylamide derivative of ethylenepropylenetriamine-pentaacetate (EPTPA5-) was also synthesized. A variable temperature 17O NMR study has been performed on their Gd(III) complexes, which, for [Gd(DTTA-Nprop)(H2O)]2- and [Gd(EPTPA-BAA)(H2O)] has been combined with multiple field EPR and NMRD measurements. The water exchange rates, k(ex)(298), are 8.0 x 10(7) s(-1), 6.1 x 10(7) s(-1) and 5.7 x 10(7) s(-1) for [Gd(DTTA-Nprop)(H2O)]2-, [Gd(DO3A-Nprop)(H2O)]- and [Gd(EPTPA-BAA)(H2O)], respectively, all in the narrow optimal range to attain maximum proton relaxivities, provided the other parameters (electronic relaxation and rotation) are also optimized. The substitution of an acetate with a propionate arm in DTPA5- or DOTA4- induces increased steric compression around the water binding site and thus leads to an accelerated water exchange on the Gd(III) complex. The k(ex) values on the propionate complexes are, however, lower than those obtained for [Gd(EPTPA)(H2O)]2- and [Gd(TRITA)(H2O)]- which contain one additional CH(2) unit in the amine backbone as compared to the parent [Gd(DTPA)(H2O)]2- and [Gd(DOTA)(H2O)]-. In addition to their optimal water exchange rate, [Gd(DTTA-Nprop)(H2O)]2- has, and [Gd(DO3A-Nprop)(H2O)]- is expected to have sufficient thermodynamic stability. These properties together make them prime candidates for the development of high relaxivity, macromolecular MRI contrast agents.     

Microwave-assisted reaction of peptide formation by amino acid with phosphate:Exploration of the most possible channels for the origin of life

The formation of peptides and then protein by small abiological molecules clusters such as amino acid is a key stage in the origin of life[1]. More and more ex- perimental results showed that phosphate plays an important role in the formation of biomolecules in prebiotic chemical evolution. The principal reservoirs of biochemical energy are phosphates (such as ATP). The peculiar role of phosphates in contemporary life might suggest its essential role in prebiotic energy conversion, syntheses …     

具有双螺旋链的新型二维无机-有机骨架晶体材料Ni(PDC)(H2O)2的合成与结构

本文报道由H2PDC合成的新型维层状无机-有机骨架晶体Ni(PDC)(H2O)2(H2PDC=吡啶-2,5-二羧酸), 该化合物的一层是由右手螺旋Ni—O—C链与左手螺旋Ni-pdc链组成, 而邻近的一层则是由左手螺旋Ni—O—C链与右手螺旋Ni-pdc链组成, 层与层之间通过氢键作用形成了三维超分子结构. 用ICP、TG、IR和X射线单晶衍射分析等手段对其结构进行表征.     

新型反相微乳液制备纳米结构甲烷催化燃烧催化剂La0.95Ba0.05MnAl11O19-α的研究

提出一种由水, 异丙醇, 正丁醇组成的新型微乳液, 并以其为反应介质制备了甲烷高温燃烧La_0.95Ba_0.05MnAl₁₁O_19-a催化剂. 采用¹H NMR, FT-IR, 电导法及激光粒度散射法研究了新型微乳液中水的结构及相特性. 新型微乳液中水的体积分数小于一定值时, 电导率与水含量成非线性关系, k～φ曲线上存在一临界值(φ^P＝0.15). 水质子的化学位移随水含量的降低移向高场. 加入4% D₂O测定的O—D键的伸缩振动随水含量增加而向高波数方向移动. 异丙醇铝在新型微乳液中水解形成的Al(OH)₃ 胶体粒子的粒径范围为226～329 nm. 采用新型微乳液作为反应介质制备的Ba_0.05La_0.95MnAl₁₁O_19-α催化剂的粒径在30 nm, 明显小于纯水制备的样品(100 nm). BET 比表面积为65 m²/g, 比纯水制备样品高出约一倍. XRD结果显示, 1200 ℃焙烧10 h即可获得含单一β-Al₂O₃相的催化剂. Ba_0.05La_0.95MnAl₁₁O_19-α催化剂甲烷催化燃烧的T₁₀为420 ℃, 比纯水制备样品下降了90 ℃. 甲烷催化燃烧活性提高是由于含有较多Mnⁿ+纳米结构六铝酸盐的形成.     

8,10-二炔廿五碳酸LB膜的周期结构

合成了8,10-二炔廿五碳酸,在玻璃片、石英片和镀金片上沉积了它的LB膜,X-射线衍射研究了LB膜的周期结构和聚合对它的影响。在2θ=1°—15°范围内观察到了多达7个布拉格衍射峰。由此计算了等同周期和分子在基片上的倾斜角。用分子模型计算了衍射峰强度,得到了与实验结果相符合的衍射峰强度奇偶起伏现象。     

Filter-based microfluidic device as a platform for immunofluorescent assay of microbial cells

A filter-based microfluidic device was combined with immunofluorescent labeling as a platform to rapidly detect microbial cells. The coin-sized device consisted of micro-chambers, micro-channels and filter weirs (gap = 1-2 microm), and was demonstrated to effectively trap and concentrate microbial cells (i.e., Cryptosporidium parvum and Giardia lamblia), which were larger in size than the weir gap. After sample injection, a staining solution containing fluorescently-labeled antibodies was continuously provided into the device (flow rate = 20 microl min(-1)) to flush the microbial cells toward the weirs and to accelerate the fluorescent labeling reaction. Using a staining solution that was 10 to 100 times more dilute than the recommended concentration used in a conventional glass method, those target cells with a fluorescent signal-to-noise ratio of 12 could be microscopically observed at single-cell level within 2 to 5 min prior to secondary washing.     

CH4, CO2和H2O在非金属原子修饰石墨烯表面的吸附

煤层气(矿井瓦斯)是一种有望替代传统化石燃料，如煤、石油和天然气的非常规气体. 作为可得的清洁能源，它的利用被认为是节能和经济的选择. 在本工作中，非金属原子X(X=H，O，N，S，P，Si，F，Cl)修饰的石墨烯(Gr)被用来代表具有结构异性的煤表面模型. 通过密度泛函理论系统地研究了煤层气组分Y(Y=CH₄，CO₂，H₂O)在非金属原子修饰石墨烯上的吸附作用. 结果表明Y在非金属原子修饰石墨烯上的吸附均为物理吸附. 态密度和差分电荷密度共同表明了这种弱的相互作用.其中，H和Cl对CH₄的作用较大； N、O、F、Cl对CO₂的作用较强； N，Cl对H₂O的影响不容忽视. 总的来说，吸附能大小依次为：H₂O>CO₂>CH₄. 因此，在CH₄富集的煤层里注入H₂O或CO₂可以与CH₄形成竞争吸附，进而提高煤层气采收率. 本工作提供了在分子水平下煤层气与非金属原子修饰石墨烯之间的相互作用的详情，并为煤层瓦斯的开采与分离提供了有用的信息.     

Study on surfactant coating of polymeric nanoparticles for controlled delivery of anticancer drug

Biodegradable nanoparticles loaded with anticancer drug paclitaxel and appropriately coated with polyvinyl alcohol (PVA), polyethylene glycol (PEG) as well as d--tocopheryl polyethylene glycol 1000 succinate (TPGS) were produced and characterised by various analysis techniques such as laser light scattering (LLS) for particle size and size distribution, scanning electron microscopy (SEM) and atomic force microscopy (AFM) for particle morphology, X-ray photoelectron spectroscopy (XPS) and Fourier Transform Infrared-Photoacoustic Spectroscopy (FTIR-PAS) for surface chemistry, and high performance liquid chromatography (HPLC) for drug encapsulation efficiency (EE) and in vitro release kinetics. The emphasis was given to the possible effects of surface coating on the physicochemical and pharmaceutical properties of paclitaxel loaded nanoparticles. It was found that the type and amount of the surfactant could significantly affect the drug EE in the nanoparticles, the particles characteristics and their in vitro release behaviour. The surfactants dominated on the nanoparticles surface and the coated nanoparticles displayed in spherical shape with relative smooth surface within the resolution scope of the equipment. The particle size and size distribution showed close relation to the surface coating, which may also be responsible for the drug encapsulation efficiency and the in vitro release kinetics. A favourable formulation of drug loaded nanoparticles of desired properties could be obtained by optimising the fabrication parameters.