Study on synthesis of two-armed polymers containing a crown ether core and their self-assembly behaviors in selective solvents

A series of well-defined two-armed polymers containing a crown ether core, poly(stearyl methacrylate)-crown ether-poly(stearyl methacrylate) (PSMA-crown-PSMA), with different molecular weight were synthesized via atom transfer radical polymerization (ATRP). The resultant polymers were characterized by ¹H NMR and GPC. The self-assembly behaviors of this kind of polymer in selective solvents were studied by TEM, and it was found that polymers with different molecular weight can directly self-assemble into hollow spheres, solid spheres and a monolayer film with regular pores by varying molecular weight and water content. The possible molecular packing motels for their self-assembly behaviors were proposed.     

Expression and Purification of ZNF191（243-368） in Three Expression Systems

ZNF191 （243-368）, a new human zinc finger protein, probably relates to some hereditary diseases and cancers, To obtain adequate amount of ZNF191（243-368） for the study of its property, structure and function, three different expression systems of inclusion-body, glutathione S-transferase （GST）, and hexahistidine （6 × His） were used and compared. Among these systems, the expression level of ZNFI91（243-368） was increased in inclusion body system under a higher isopropylthio-β-D-galactoside （IPTG） concentration, but the non-target proteins were also increased more, which made its purification more difficult and the yield lower. The expression of His-tag fusion protein was almost not affected by IPTG concentration, temperature and inducing time. At a high IPTG concentration the highest expression yield for GST fusion protein was obtained. And the fusion proteins can be partially purified by a single affinity chromatography step. The fusion protein systems show advantages for expression of these proteins.     

The influence of core-shell structured modifiers on the toughness of poly (vinyl chloride)

The core-shell structured grafted copolymer particles of polybutadiene grafted polymethyl methacrylate (PB-g-PMMA, MB) were prepared by emulsion polymerization. The MB particles were used to modify poly (vinyl chloride) (PVC) by melt blending. The mechanical properties of the PVC blends were investigated. The micro-morphology of the PVC blends was observed by scanning electron microscopy (SEM). The results indicated that the samples with the best impact strength could be obtained when the core-shell weight ratio of PB to PMMA is lower than 93:7, the mechanical properties correlated well with SEM morphologies, the addition of modifier with the ratio core to shell of 93:7 could reduce the domain size of the dispersed phase. Furthermore, the compatibility and properties of the blends were greatly enhanced and improved. The modifier particles could be well dispersed in the PVC matrix.     

用FTIR定量测定聚对苯二甲酸乙二酯晶区和非晶区反式构象含量

用傅里叶变换红外分光光度计测定不同条件下退火处理的聚对苯二甲酸乙二酯膜的谱图, 用谱带分离技术对归属于反式构象的1340cm^-^1谱带进行阻尼最小两乘分峰处理, 结合属左右式构象贡献的1454cm^-^1谱带, 用线性回归分析的方法获得晶区反式构象、非晶区反式构象、非晶区左右式构象的百分含量。     

Carbon nanohorns grown from ruthenium nanoparticles

A nanoscale ruthenium/gold bimetallic cluster of clusters has been used as a molecular precursor to produce pure ruthenium nanoparticles (seeds) as catalysts for the growth of carbon nanohorns (CNHs).     

明胶中α组分含量对明胶/羟基磷灰石复合材料力学性能的影响

选用α组分含量分别为20.5%,41%和50%的A、B、C 3种明胶作为原料,采用同时加入法制备了明胶/羟基磷灰石(HAP)复合材料.通过对干态复合物膜拉伸性能的测试和对比,发现,明胶α组分含量的变化对复合材料的弹性模量影响较大,而对拉伸强度和断裂伸长率的影响则相对较小,但总的来说,三者均随α组分含量的增加而增大.其中,α组分含量最高的复合物C的拉伸强度为86.40 MPa,弹性模量为2682.35 MPa,断裂伸长率为8.65%.另外,对复合物C基本性质的表征结果表明,该材料具有类似于自然骨的组成和结构性质,因此有望成为一种具有优异力学性能的骨替代材料.     

Preliminary study on dual fluorescence behavior of porphyrin

It is well known that porphyrin derivatives play a key role in the primary process of photo-synthesis[1], in which porphyrins directly absorb the sunlight or indirectly acquire excitation en-ergy from light-harvesting antenna system to reach their excited state, and then donate electrons to quinone acceptors to yield a series of charge-separated species. In general, only first singlet ex-cited state of porphyrins is involved in energy transfer process[2]. However, highly excited state (S2 stat…     

Preparation and mechanical properties of thermal energy storage microcapsules

A series of heat energy storage microcapsules was prepared using melamine-formaldehyde resin as the shell material and the mechanical properties of the shell were investigated. A phase change material whose melting point was 24 °C was used as core and the quantity of heat involved in phase transition was 225.5 J/g. Average diameter of the microcapsules varied from 5 to 10 μm, and the globular surface was smooth and compact. The mechanical properties of the shell were evaluated by observing the surface morphological structure change after application of pressure by means of scanning electron microscopy. When the mass ratio of the core and shell material is 3:1, a yield point of about 1.1×10⁵ Pa was found and when the compression was increased beyond this point the microcapsules showed plastic behavior. This has been attributed to the cross-link density and to the high degree of reaction of the shell material. Different yield points subsequently reflected differences in the mechanical behavior. It was also found that the mechanical intensity of double-shell microcapsules was better than that of single shelled ones.     

锂离子二次电池电解质材料LiPF6的制备及表征

0引言 液态锂离子电池自1990年开发成功以来,由于具有比能量高、工作电压高、应用温度范围宽、自放电率低、循环寿命长、无污染、安全性能好等许多独特的优势[1],所以其发展前景十分广阔.目前液态锂离子二次电池中开发使用的无机阴离子导电盐主要有LiClO4、LiPF6、LiAsF6等,但LiClO4为强氧化剂,使用不安全而不宜用于电池,LiAsF6虽然性能颇佳,但有毒且价格较贵,故也不宜广泛使用.LiPF6被认为是目前较合适的电解质[1],但其制备困难,价格较贵,且目前报道的合成方法也多是以HF为介质[2～5].本文作者以PF5和LiF为原料在CH3CN溶剂中简单有效地合成了高纯LiPF6,并通过在手套箱中制样的方法对目标产物进行了红外、热重和X射线衍射分析,给出了LiPF6的红外光谱图、热重分析数据和X射线衍射图.     

过硼酸钠对于有机物的氧化作用的研究 II: 氧化偶氮硝基苯类的合成

作者曾报道过硼酸钠在醋酸溶液中可使芳氨基氧化成硝基;McKillop等曾报道将过硼酸钠用于官能团的氧化;Huestis曾报道在冰醋酸溶液中用过硼酸钠将芳胺氧化成偶氮苯。这些都表明过硼酸钠是一种优良的氧化剂,反应条件温和、选择性强、氧化剂本身。价廉且其还原后所生成的硼酸钠易于处理和排放。因此,值得深入研究其应用范围。我们在此则报道一组以过硼酸钠为氧化剂,使芳胺氧化成氧化偶氮苯的条件。最近我们发现,在乙醇-磷酸体系中,过硼酸钠能顺