Influence of surface properties of the titanium dioxide porous films on the characteristics of solar cells

Porous films formed by cylindrical geometrically anisotropic fragments of TiO₂ have been produced by electrochemical anodization of titanium. The specific surface area and pore volume of the samples were determined by the BET method. It is shown that the samples have a bimodal pore-size distribution with maxima depending on the anodization voltage: by increase in voltage the inner diameter of the cylindrical pores grows, which leads to a decrease in the specific surface area. Dye sensitized solar cells were assembled on the basis of the obtained materials to study the effect of certain characteristics on the efficiency of solar energy conversion. The electrical transport properties of the films were studied by impedance spectroscopy.     

Quantum chemical studies of azoles

The results of theoretical search for model transition states of the electrophilic substitution reaction in 2H-tetrazole (1) without the preliminary formation of N-protonated azolium salts are presented for two routes that were previously suggested by the authors and thermodynamically investigated: A, the attack of molecule 1 by the nucleophile (HO^–(aq)) to form the anion to which the electrophile H₃O⁺(aq)) is added and B, the attack of molecule 1 by the same electrophile followed by the addition of the same nucleophile to the specifically solvated protonated species formed in the preceding reaction step. The calculations were performed using the DFT/B3LYP/6-31G(d) method and the scanning procedure of the potential energy surface (PES). Both steps of route A turned out to be nearly barrierless, while in route B only its first step is barrierless and the second one is conjugated with passing an activation barrier of ～45 kcal mol^–1 between non-interacting or weakly interacting reactants and electrophilic substitution products. Unlike the specifically solvated protonated species of 1H-tetrazole in an aqueous solution, a similar species of 2H-tetrazole does not form a prereaction complex with the attacking nucleophile (HO^–(aq)) and the five-membered ring is destroyed in fact in the nitrogen-containing reaction product formed after passing the activation barrier. The optimized structure of the transition state differs strongly from the nitrogen-containing structure of the reaction product with the destroyed ring, which was found by scanning of the PES.     

Functional copolymers with triazole and acetate fragments

New functional copolymers of different composition with triazole and acetate fragments in the macromolecules were synthesized by free radical copolymerization of 1-vinyl-1,2,4-triazole with vinyl acetate. The reactivity of the comonomers was studied and the monomer copolymerization constants were calculated. The structure and composition of the copolymers were determined by elemental analysis, IR and ¹H NMR spectroscopy.     

Fe-containing nanocomposites based on a biocompatible copolymer 1-vinyl-1,2,4-triazole with <Emphasis Type="Italic">N</Emphasis>-vinylpyrrolidone

New polymer nanocomposites containing iron oxide nanoparticles stabilized with a biocompatible copolymer of 1-vinyl-1,2,4-triazole with N-vinylpyrrolidone were produced. The synthesis was conducted using the method of chemical reduction of iron ions with hydrazine hydrate in an aqueous medium in the presence of a polymer matrix. The ESR spectroscopy data showed that the core—shell type nanoparticles were obtained. The core generally consistsed of zero-valence iron coated with an oxide shell. According to the data of transmission electron microscopy, the obtained polymer nanocomposites consisted of nanoparticles of mainly spherical shape with a diameter from 1 to 14 nm. Aggregates formed from individual stabilized nanoparticles of up to 75 nm in size (in most cases) were also observed. These aggregated particles were found to self-organize and form branched chains. Nanocomposites were characterized by a different particle-size distribution, which was determined by the initial ratio of the copolymer and the precursor of iron nanoparticles.     

Synthesis of complexes of N-vinylpyrrolidone–vinylamine or N-vinylpyrrolidone–allylamine containing macrocyclic polyligand 1,4,7,10-tetraazacyclododecane-1,4,7,10-tetraacetate (DOTA) with gallium-68 isotope and estimation of their in vivo distribution

Russian Chemical Bulletin - A method for radiolabeling the water-soluble N-vinylpyrrolidone copolymers with N-vinyl- and N-allylamine containing bifunctional chelation unit...     

NO-donating and hemolytic activity of tetranitrosyl iron complexes with ligands of the 2-mercaptopyridine series

Russian Chemical Bulletin - The NO-donating and hemolytic activity of the binuclear tetranitrosyl iron complexes (TNIC) with thiolate ligands of the composition [Fe2(SR)2(NO)4], where R is...     

Gas-phase fragmentation studies of biotinylated oligomannuronopyranosides under conditions of collisionally activated dissociation

Russian Chemical Bulletin - High-resolution electrospray ionization mass spectra (MS and MS/MS) of a series of glycoconjugates containing biotin and oligomannuronopyranosyl residues linked via a...     

Checking of applicability of conditions for reaching the limiting-current mode to flow-by porous electrodes

For the flow-by porous electrodes, which differ in thickness, specific surface area, solution flow rate, and a ratio between the phase conductivities, the conditions providing the limiting-current mode over the entire electrode surface at nearly 100% current efficiency are determined using the method of successive refinement of total current and profile of its distribution along the solution flow. The used values of electrode thickness L are compared with available estimates for the limiting thickness of porous electrode L _lim derived for the ideal limiting-current mode and calculated using real values of the width of the limiting-current plateau of overall polarization curve, solution conductivity, and the diffusion limiting current in the zone of solution input into the electrode. It is found that these values are close to each other in all cases. The largest error of estimation of L _lim does not exceed 10% indicating that it can be used for preliminary estimation of the conditions for reaching the limiting-current mode for the flow porous electrodes of this type.