Carbon-bound diazeniumdiolates from the reaction of nitric oxide with amidines

[reaction: see text] The enediamine tautomer of a variety of substituted amidine free bases reacts with nitric oxide (NO) to produce compounds containing a carbon-bound diazeniumdiolate [R1R2R3C-N(O)=NO-] functional group (previously called "nitrosohydroxylamines"). The new reaction has been shown to be quite general, although the nature of the products does vary. Amidines containing more than one replaceable hydrogen produce polydiazeniumdiolates as intermolecular salts, while those in which only one diazeniumdiolation can occur provide zwitterionic salts. These diazeniumdiolated amidines are shown to be useful NO donor compounds which undergo very slow spontaneous dissociation on dissolution in pH 7.4 phosphate buffer to produce mixtures of NO and nitrous oxide containing mostly NO. The most advantageous manifestation of the new discovery is the preparation of the monodiazeniumdiolated amidine zwitterions. Reaction of the medically relevant alpha-adrenergic agonists tetrahydrozoline and idazoxan produced monodiazeniumdiolated amidine zwitterions from which NO release was observed for up to 28 days and showed little sign of ending. The reaction should be applicable to a variety of pharmaceutical agents, including NO synthase inhibitors, antitumor agents, and antibacterials.     

Some symmetry-induced isotope effects in the kinetics of recombination reactions

Symmetry-induced isotope effects in recombination and collision-induced dissociation reactions are discussed. Progress on understanding the anomalous isotope effects in ozone is reviewed. Then, calculations are performed for the simpler reaction xNe+yNe+H<-->xNeyNe+H, where x and y label either identical or different isotopes. The atomic masses in the model are chosen so that symmetry is the only difference between the systems. Starting from a single potential energy surface, the properties of the bound, quasibound, and continuum states of the neon dimer are calculated. Then, the vibration rotation infinite order sudden approximation is used to calculate cross sections for all possible inelastic and dissociative processes. A rate constant matrix that exactly satisfies detailed balance is constructed. It allows recombination to occur both via direct three-body collisions and via tunneling into the quasibound states of the energy transfer mechanism. The eigenvalue rate coefficients are determined. Significant isotope effects are clearly found, and their behavior depends on the pressure, temperature, and mechanism of the reaction. Both spin statistics and symmetry breaking produce isotope effects. Under most conditions the breaking of symmetry enhances the rates, but a wide spectrum of effects is observed; they range from isotope effects with a normal mass dependence to huge, mass-independent isotope effects to cancellation and even to reversal of the isotope effects. This is the first calculation of symmetry-induced isotope effects in recombination rates from first principles. The relevance of the present effects to ozone recombination is discussed.     

Electrocatalytic Oxidation of Cysteine and Cystine at a Carbon-Paste Electrode Modified with Ruthenium(IV) Oxide

The electrocatalytic activity of ruthenium(IV) oxide incorporated into a carbon-paste electrode was studied in the oxidation of cysteine and cystine. The oxidation potentials of the amino acids decreased and the current peaks of their oxidation increased at a modified electrode as compared to an unmodified one. Procedures for the voltammetric determination of cysteine and cystine with the use of electrodes chemically modified with ruthenium(IV) oxide were proposed.     

Evaluation of the Use of QSARS for Priority Setting and Risk Assessment

Abstract Impending changes in EEC legislation have accelerated the need to define the principles and practical considerations of the use of QSARs in priority setting and risk assessment. It is important to delineate the limitations of this approach and to review whether and how this information should be used in the risk assessment. The value and limitations of QSARs for use in priority setting and risk assessment will not be discussed in detail since the European Chemical Industry Ecology and Toxicology Centre (ECETOC) has only recently established a Task Force to tackle this issue. The terms of reference of the Task Force are: (1) compare the predictions obtained with QSARs to measured data using ECETOC databases and other sources of data and comment on the validity and applicability of such QSARs; (2) identify and review software packages which are available for accessing and using appropriate QSARs; (3) identify those aspects of environmental distribution, fate and effects where the further development of QSARs is desirable and feasible; and (4) provide a scientific basis for ECETOC's contribution to the activities of the European Chemicals Bureau (ECB) in this area. In this short paper, only an initial and personal evaluation is made of when and where to use QSARs in the priority setting and risk assessment process within the regulatory framework. Some critical remarks and suggestions are provided to guide future developments and integration of QSARs in the risk assessment process.     

Physico-Chemistry of the Limestone Sulphation Process

Aspects of the mechanism of the overall reaction between CaCO₃/CaO and SO₂/SO₃ under oxidizing conditions are discussed. The limestone and lime sulphation processes were carried out in a thermobalance under conditions relevant to atmospheric fluidized bed combustion. Sulphated samples, prepared in the form of cross-section particles, were examined in a scanning electron microscope by energy-dispersive X-ray and back-scattered electron imaging. Photomicrographs are presented. The reaction proceeded from the outer surface of the particles and along the pores. Surface textural changes during the reaction were considered. The layer of products was identified as controlling both the rate and extent of limestone/lime sulphation. In the products, two sulphur-bearing solids (CaSO₄ and CaS) were identified. The presence of CaS, which may cause difficulties in practice, is attributed to CaSO₃ disproportionation. This revised version was published online in August 2006 with corrections to the Cover Date.     

CHARGE TRANSFER ACROSS PIGMENTED BILAYER LIPID MEMBRANE AND ITS INTERFACES

Abstract— The technique of forming bilayer lipid membranes (BLM) has made it possible to study photoreactions of pigments in an environment that is much closer to those in photosynthetic and visual membranes. A pigmented BLM system with Mg²⁺-porphyrins as membrane-bound pigments and with ferricyanide and ferrocyanide as the aqueous electron acceptor and donor, respectively, was used to illustrate the photoelectric effects due to coupled interfacial charge transfer reactions.
The steady-state continuous photoresponse was studied by means of the voltage clamp method and a null current method. The independence of the pigment conductance channel and the ionic conductance channel was demonstrated. A tunable voltage clamp method was used to study the transient pulsed photoresponses. Such a measurement permits us to characterize the photosystem in terms of an equivalent circuit model which contains a novel chemical capacitance. Molecular interpretation of this equivalent circuit model was given.
A microscopic model based on the Gouy–Chapman theory and chemical kinetics calculation leads to an equivalent circuit which is also equivalent to the previous one. Generalization of this microscopic model further leads to a physical mechanism of the generation of the early receptor potential (ERP) in visual membranes. Relevance of pigmented BLM research to photosynthesis and other disciplines was also discussed.     

Intramolecular metal—double bond interactions : VII. Intramolecular cyclization of alkenyl derivatives of lithium,aluminum, gallium and indium

The intramolecular cyclization reactions of tri-1-hex-5-enyl Group III derivatives and of 1-hex-5-enyllithium have been investigated and it is proposed that the reactions may be depicted as internal addition across the terminal double bonds of the alkenyl species. The cyclization reaction proceeds more readily for the 1-hex-5-enyl derivatives than for any other chain length and is dependent on temperature, concentration and solvent. ¹H NMR data and cryoscopic molecular weight data are presented for several diisobutyialkenyl- and diisobutylalkyl-aluminum derivatives. These data have been interpreted in terms of a direct intramolecular interaction between the metal center and the π-electron system of the olefinic site. The intramolecular cyclization reactions for the 1-hept-6-enyl, 1-oct-7-enyl- and 1-undec-10-enylaluminum derivatives also were investigated and it was found that cyclization occurred only for the 1-hept-6-enyl derivative.     

Chloride, -Hydride and -Borohydride Derivatives of Difluorenyl Thallium(III)

Chloride¹), borohydrides²) and hydrides³) of dicyclopentadienyl thallium (III) and diindenyl thallium (III) have already been reported. The present communication deals with a study on the preparation and characterization of difluorenyl thallium (III) chloride, -hydride and -borohydride.     

19F-Kernresonanzuntersuchungen an Imidoschwefeloxiddifluoriden

¹⁹F nuclear magnetic resonance studies on imidosulphuroxide difluorides Non equivalent fluorine atoms bounded to hexavalent sulphur of the NSOF₂ group in thionyl compounds give extreme AB-spectra.     

NMR studies on the stereospecific polymerization of methyl vinyl ether. Part I. Polymerization by metal halides: Penultimate effect

Methyl vinyl ether (MVE) was polymerized under various conditions by BF₃·O(C₂H₅)₂ and SnCl₄·CCl₃CO₂H catalysts. The effect of polymerization conditions on the steric structure of poly(methyl vinyl ether) (PMVE) was studied by NMR spectra. It was found that the triad isotacticity of PMVE decreased and the syndiotacticity and heterotacticity increased with increasing polarity of the solvent and increasing polymerization temperature. This result coincided with the qualitative conclusion estimated from softening point and infrared spectra. However, the variation of tacticity by the change of the polarity of a solvent was not so large as expected. There was no large difference between the behavior of BF₃·O(C₂H₅)₂ and SnCl₄·CCl₃CO₂H as catalysts. From the relation between the difference of free energy of monomer addition due to the steric structure of the polymer and the polymerization temperature, it was concluded that the penultimate effect really existed and was due to only the difference in enthalpy in the MVE–BF₃. O(C₂H₅)₂ or MVE–SnCl₄·CCl₃CO₂H systems. The penultimate effect was not greatly changed by the polymerization conditions in these systems.