THE USE OF THERMOELASTICITY TO EVALUATE STRESS REDISTRIBUTION AND NOTCH SENSITIVITY IN CERAMIC MATRIX COMPOSITES

Thermoelastic stress analysis was used to document the effect of composite damage on the stress distribution in three ceramic matrix composites. Composite damage was found to significantly alter the thermoelastic response of each material, with the greatest effect noted in SiC/CAS. Thermoelastic imaging of these materials affords a more complete picture of how the various damage mechanisms affect the stress distribution. In particular, a stress concentration factor computed from thermoelastic images, serves as an indicator of stress redistribution. The stress concentration factors were computed by comparing notch root to far field temperatures, and monitored after the introduction of various amounts of damage. In each material, the stress concentration factor diminished as the damaging load approached the ultimate stress. Reduction in the stress concentration is associated with local changes in modulus, mechanistically arising from combinations of fiber, matrix and interface fracture. Stress redistribution occurs as a consequence of modulus changes, leading to lower notch sensitivity in each of the tested composites.     

Shape transition from InAs quantum dash to quantum dot on InP(3 1 1)A

We report on the shape transition from InAs quantum dashes to quantum dots (QDs) on lattice-matched GaInAsP on InP(3 1 1)A substrates. InAs quantum dashes develop during chemical-beam epitaxy of 3.2 monolayers InAs, which transform into round InAs QDs by introducing a growth interruption without arsenic flux after InAs deposition. The shape transition is solely attributed to surface properties, i.e., increase of the surface energy and symmetry under arsenic deficient conditions. The round QD shape is maintained during subsequent GaInAsP overgrowth because the reversed shape transition from dot to dash is kinetically hindered by the decreased ad-atom diffusion under arsenic flux.     

QUALITATIVE AND QUANTITATIVE ANALYSIS OF STOCHASTIC PROCESSES BASED ON MEASURED DATA, II: APPLICATIONS TO EXPERIMENTAL DATA

Analysis of stochastic processes governed by the Langevin equation is discussed. The analysis is based on a general method for non-parametric estimation of deterministic and random terms of the Langevin equation directly from given data. Separate estimation of the terms corresponds to the decomposition of process dynamics into deterministic and random components. Part I of the paper presented several possibilities for qualitative and quantitative analysis of process dynamics based on such decomposition. In Part II, some of these analysis possibilities are applied to experimental datasets from metal cutting and laser-beam welding.     

Aeolian Tones of a Honeycomb Lattice Cell

Aeroacoustic resonant oscillations (aeolian tones) are studied for flow past two plates forming a cross in a square cross section channel. Possible oscillation modes are classified on the basis of admissible symmetry groups and the existence of the modes is proved. The infinite linear system of equations for these modes obtained by the sewing method was simplified and studied numerically. Curves of eigenfrequency versus plate length are constructed. The form of the eigenfunctions is studied.     

Scientific heritage of Boris Lukich Laptev (4/23/05–1/15/89)

Biographical information on the eminent Soviet geometer Boris Lukich Laptev (4/23/05–1/15-89) is given as well as a survey of his research in the areas of differential geometry and history of mathematics.Translated from Itogi Nauki i Tekhniki, Seriya Problemy Geometrii, Vol. 21, pp.27–42, 1989.     

Influence of barrier parameters on tunneling in ferromagnet-insulator-ferromagnet contacts

The contribution of electrons moving at large angles to the barrier junction plane to the tunnel current is calculated. This contribution turns out to be small only if the Fermi energy of the electrons equals several electron volts. Otherwise, specifically, when the Fermi energy is no higher than 1–2 eV, this contribution dominates in high and thin potential barriers. It is found that the tunnel magnetic resistance in ferromagnet-insulator-ferromagnet contacts correlates with this contribution. It is this correlation that is responsible for a decrease in this contribution as the potential barriers get lower and thicker.     

On the excitation of a closely spaced array by a line source

An infinite row of periodically spaced, identical rigid circularcylinders is excited by an acoustic line source which is parallelto the generators of the cylinders. A method for calculatingthe scattered field accurately and efficiently is presented.When the cylinders are sufficiently close together, Rayleigh–Blochsurface waves that propagate energy to infinity along the arrayare excited. An expression is derived which enables the amplitudesof these surface waves to be computed without requiring thesolution to the full scattering problem.     

Sympathetic cooling rate of gas-phase ions in a radio-frequency-quadrupole ion trap

We theoretically investigated the mass dependence of the sympathetic cooling rate of gas-phase ions trapped in a linear radio-frequency-quadrupole ion trap. Using an a priori molecular dynamical calculation, tracing numerically with Newtonian equations of motion, we found that ions with a mass greater than 0.54±0.04 times that of the laser-cooled ions are sympathetically cooled; otherwise, they are heated. To understand the mass dependence obtained using the molecular-dynamical calculation, we made a heat-exchange model of sympathetic cooling, which shows that the factor of 0.54±0.04 is a consequence of absence of micro-motion along the axis of the linear ion trap. Received: 10 December 2001 / Revised version: 28 January 2002 / Published online: 14 March 2002     

Conditional Time Before Ruin of an Insurance Company

The statistical characteristics of conditional time before ruin of an insurance company, including the distribution function of conditional time and its moments are examined.