A passive sampler-GC/ECD method for analyzing 18 volatile organohalogen compounds in indoor and outdoor air and its application to a survey on indoor pollution in Shizuoka, Japan

A simple and reliable method was developed for analysis of 18 volatile organohalogen compounds (VOHCs) both indoors and outdoors, consisting of VOHC collection by a passive sampler, extraction with toluene by mechanical shaking, and automatic separation analysis by capillary gas-chromatography with electron capture detector (GC/ECD). The passive sampler is a porous polytetrafluoroethylene (PTFE) tube (30.30+/-0.37 mm net collection length, 5.0 mm inside diameter, 0.990 g weight) uniformly packed with activated charcoal (194.4+/-3.8 mg). The procedure was applied to a field survey on indoor and outdoor VOHC pollution in Shizuoka, Japan. Ten VOHCs, including trichloroethylene, tetrachloroethylene, chloroform, carbon tetrachloride, and p-dichlorobenzene, were detected from indoor and outdoor air samples. The ratios of maximum to minimum VOHC concentrations, both outdoors and indoors, were large. The indoor and outdoor concentrations of 1,1-dichloroethylene, dichloromethane, 1,1,1-trichloroethylene, carbon tetrachloride and trichloroethylene were found to be similar. Indoor concentrations of trihalomethanes, p-dichlorobenzene and tetrachloroethylene were higher than those of outdoors.     

7-Aryl-6,7-dihydro-8h-indeno[1′,2′∶2,3]pyrano-[5,6-c]benzo[c]pyran-6,8-diones and their thio analogs

The ability of 3-[-(1,3-dioxo-2-indanyl)benzyl]-4-hydroxy-substituted 2H-benzo [b]pyran-2-ones and benzo[b]thiopyran-2-ones to undergo dehydration under the influence of dehydrating agents to give 7-aryl-6,7-dihydro-8H-indeno[1,2-2,3]pyrano[5,6-c]benzo[c]pyran-6,8-diones and their thio analogs was demonstrated.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 11, pp. 1475–1476, November, 1985.     

Novel electroanalytical techniques for pollution analysis

Summary Two new analytical techniques are described. The so-called injection technique operates on evaluating a dynamic concentration signal as a result of following the concentration change in a certain part of a flow-through channel after injecting a sample or reagent at a small volume into the current of an appropriate solution flowing at a constant rate.The second technique, the programmed coulometric titration technique, also uses the flow-through channel principle; that means this novel technique allows the more precise titrimetric way of analysis in flowing solutions. In the case of both techniques potentiometric and voltammetric detectors were involved. Several examples proved the multifold advantages of these techniques for environmental analysis.

---

Neue elektroanalytische Verfahren für die Umweltanalyse

Zusammenfassung Zwei neue Methoden werden beschrieben. Die sog. Injektionstechnik wertet ein dynamisches Konzentrationssignal aus, das sich aus der Änderung in einem Durchflußkanal ergibt, wenn Probe oder Reagens in kleinen Volumina in einen konstant fließenden Flüssigstrom injiziert werden. Das zweite Verfahren, die programmierte coulometrische Titration, erlaubt die Anwendung der genaueren titrimetrischen Technik auf fließende Lösungen. Bei beiden Methoden werden potentiometrische und voltammetrische Detektoren verwendet. Mehrere Beispiele zeigen die vielfachen Vorteile dieser Verfahren bei der Anwendung auf die Analyse von Umweltmaterial.

Presented at the 6th Annual Symposium on Recent Advances in the Analytical Chemistry of Pollutants, April 21–23, 1976; Vienna, Austria     

Gel permeation chromatography with mixed eluents: Polymer solution as mobile phase

The GPC elution behaviour of a polymer was studied when a solution of another polymer in a liquid was used as an eluent. In ternary systems containing two polymers, GPC results are influenced by the thermodynamics of polymer incompatibility. The incompatibility manifests itself both in the slope of the dependence of elution volume upon the concentration of injected polymer and in the shift of elution volumes extrapolated to zero concentration. Experimental data for systems containing poly(styrene) and poly(methyl methacrylate) have been accounted for qualitatively by theoretical views on coil shrinkage resulting from polymer incompatibility. The concentration effects of the injected polymer and the polymer in the mobile phase on elution volume are compared; further parameters affecting the separation in the systems with polymer solution as eluent are discussed.     

Construction of a liquid-membrane type periodate ion-selective electrode and its application to the potentiometric titration of alpha-diols and alpha-amino-alcohols

The construction of a liquid-membrane type periodate ion-selective electrode and its application to the potentiometric titration of alpha-diols and alpha-amino-alcohols are described. The ion-pair of periodate anion with Capriquat (tri-n-octylmethylammonium chloride), is easily extracted into nitrobenzene, and this extract is employed as a liquid ion-exchange membrane. The calibration curve shows Nernstian response towards periodate ion over the concentration range from 10(-1)M to 10(-7)M with a slope of 60 mV/pIO(-)(4). Selectivity coefficients with respect to various ions were evaluated. The electrode potential was independent of pH in the range 2.5-7.5. Some alpha-diols and monoethanolamine were successfully titrated potentiometrically with the aid of the present electrode.     

Metallocene monomers and polymers. Ferrocenyl and ferrocenylene derivatives

The synthesis and study of some polyenes, polýiminoimides and Schiff polybases with ferrocene obtained by either polymerization or polycondensation are reported.The following monomers were used: ethynylferrocene, 1-chloro-1′-ethynyl-ferrocene, α-chloro-β-formyl-p-ferrocenylstyrene, p-ferrocenylphenylacetylene, p-ferrocenylacetophenone, 1,1′-diacetylferrocene and 1,1′-bis[β-(2-furyl)acryloyl]ferrocene which were characterized by spectral and thermodifferential analyses and Hückel MO calculations. The polymerization was performed in the presence of benzoyl and lauroyl peroxides, triisopropylboron and complex catalysts of [P(C₆H₅)₃]₂ NiX₂ type. The ferrocene derivatives were polycondensed with biuret, 4,4′-diaminodiphenyl ether, 4,4′-diaminodiphenyl thioether, 4,4′-diamino-2,2′-dinitrodiphenyl disulphide in the presence of metallic salts and p-toluene sulphonic acid as catalysts.Polymers with either linear or tridimensional structure showing good thermal stability and semiconducting properties have been obtained. Some polymers show catalytical activity in the polymerization of chloroformylated vinylic derivatives.     

Synthesis of thiirane oximes from 3,4-dibromo-3-methyl-2-butanone oxime

2-(-Oximinoethyl)-2-methylthiirane was obtained by the reaction of 3,4-dibromo-3-methyl-2-butanone oxime with sodium sulfide. At the same time, the O-carbamoyl derivative of the ,-dibromo oxime was converted to the corresponding substituted ,-unsaturated oxime under the same conditions. Thiirane oxime, like its O-carbamoyl derivative, underwent the desulfuration that is characteristic for thirranes under the influence of tributylphosphine.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 6, pp. 751–753, June, 1982.     

Construction and analytical applications of an improved liquid-membrane electrode for salicylate

The construction and analytical applications of an improved liquid-membrane electrode for salicylate are described. Tests of various combinations of symmetrical tetraalkylammonium salicylates and solvents showed that the best liquid ion-exchanger was tetraoctylammonium salicylate in p-nitrocumene. Electrode response is Nernstian down to 2 × 10^?5 M. Major interferences are perchlorate and periodate; the working pH range is 6–9. The electrode is useful for direct potentiometric determinations of salicylate in pharmaceutical preparations.     

The effect of organic nitriles on the radiation induced polymerization of styrene

The effect of a range of 10 organic nitriles on the radiation-induced polymerization of styrene was studied. A dose rate of 4.4 rad s^?1 was used. A rate of polymerization of styrene (1.744 mol L^?1 of toluene solution) of 5.0 × 10^?7 mol L^?1 s^?1 was found. With organic nitriles present (styrene:nitrile ratio of 1:0.28) the rate of polymerization increased. Rates in the range of 5.5 × 10^?7 ?5.2 × 10^?6 mol L^?1 s^?1, depending on the nitrile present, were obtained. The polymers were partially characterized and evidence of involvement of each of the nitriles in the polymer chains was revealed. The increase in rate of polymerization has been attributed to the part played by nitrile radicals in the initiation of styrene polymerization. Radical yield values [as G(nitrile radical)] were derived from the relevant rate expressions. Values ranged from 2.7 to 49.5, depending on the particular nitrile. Corresponding values of G(nitrile radical) in the range of 5.1–129.4 were obtained by the manipulation of number-average molar mass data. Values of k_pk_t of approximately 2 × 10^?5 L mol^?1 s^?1 were found. Trommsdorff types of effect are absent from these systems.     

Nature of mechanically induced defects in polycrystalline hydrargillite and Al2O3-A1(OH)3 studied by radiation methods

Mechanical treatment of hydrargillite Al(OH)₃ in a vibrational grinder and in a ball-mill grinder increases the dispersion, the specific surface area, and the unit-cell constants. An x-ray amorphous phase forms. Differences in the nature and in the concentration of paramagnetic centers arise on irradiation (77 K) of the mechanically treated samples. Anion vacancies and oxygen ions with disrupted short-range order appear in the mechanically treated samples. Their concentration increases with increased time of mechanical treatment. Pulsed thermal treatment of hydrargillite forms the Al₂O₃-Al(OH)₃ system and anneals the mechanically induced defects.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 7, pp. 1463–1467, July, 1990.