A refined stress-strain analysis in the load transfer zone of flat specimens of high-strength unidirectional composites in uniaxial tension 1. Theoretical analysis

With the use of an analytical approach developed, the influence of distribution of a tangential load on the stress concentration in uniaxially tensioned flat specimens of high-strength unidirectional composites near the grips of a testing machine is evaluated. In view of singularity of the analytical solution derived at the points of discontinuity of boundary conditions, for estimating the stress concentration, it is suggested to employ the averaged value of longitudinal stresses, which is calculated by means of an improper integral across the thickness of a near-surface layer. __________ Translated from Mekhanika Kompozitnykh Materialov, Vol. 42, No. 6, pp. 787–796, November–December, 2006.     

Some non-local problems for the parabolic-hyperbolic type equation with non-characteristic line of changing type

In this work two non-local problems for the parabolic-hyperbolic type equation with non-characteristic line of changing type are considered. Unique solvability of these problems is proven. The uniqueness of the solution is proven by the method of energy integrals and the existence is proven by the method of integral equations.     

Generation of 0.2-TW 5.5-fs optical pulses at 1 kHz using a differentially pumped hollow-fiber chirped-mirror compressor

Optical pulses with 1.1-mJ energy and 5.5-fs duration have been generated at 1-kHz repetition rate from a chirped pulse amplification Ti:Sapphire laser incorporating a differentially pumped hollow-fiber chirped-mirror compressor. The effects of self-focusing and multi-photon ionization during the beam propagation were minimized by differentially pumping the hollow fiber filled with neon. The spectral broadening at the hollow-fiber compressor was optimized by adjusting gas pressure, laser intensity, and laser chirp, covering from 540 nm to 950 nm. PACS 42.65.Jx; 42.65.Re     

Transport properties of polyphenylquinoxalines

The correlation between chemical structure and gas transport properties is considered for a new class of membrane materials based on structurally similar polyphenylquinoxalines that are characterized by different numbers of flexible-O-ether bonds in the repeating unit and different chain rigidities. Permeability, diffusion, and solubility coefficients have been estimated for the gases H₂, He, O₂, N₂, CO, CO₂, and CH₄; separation factors for various gas pairs have been determined. For the materials with a similar level of cohesive energy density, which characterizes interchain interactions, permeability decreases with a decrease in chain rigidity, whereas selectivity of gas separation increases.     

Browder-Petryshyn 型的严格伪压缩映射的粘滞迭代逼近方法

主要研究Browder-Petryshyn型的严格伪压缩映射的粘滞迭代逼近过程,证明了Browder-Petryshyn型的严格伪压缩映射的不动点集F(T)是闭凸集．在q-一致光滑且一致凸的Banach空间中,对于严格伪压缩映射T,利用徐洪坤在2004年引进的粘滞迭代得到的序列弱收敛于T的某个不动点．同时证明了Hilbert空间中Browder-Petryshyn型的严格伪压缩映射的相应迭代序列强收敛到T的某个不动点,其结果推广与改进了徐洪坤2004年的相应结果．     

Electronic structure and elastic moduli of the simple cubic fullerite C24—A new allotropic carbon modification

The energy band structure, equation of state, density of states, and elastic moduli of a new allotropic carbon modification, namely, fullerite C₂₄ with a simple cubic lattice (known previously as cubic graphite), are calculated by the full-potential linearized augmented-plane-wave (FLAPW) method with geometry optimization for the first time. The dependence of the total energy on the lattice constant exhibits a minimum for a ₀ = 0.60546 nm. In this case, the lengths of the C-C bonds between fullerene molecules, the lengths of the 6,6-bonds shared by hexagons, and the lengths of the 4,6-bonds shared by a square and a hexagon are equal to 0.1614, 0.1503, and 0.1637 nm, respectively. An analysis of the energy band structure and the density of states demonstrates that the simple cubic fullerite C₂₄ is a direct-band-gap insulator or a semiconductor with a band gap of 1.6 eV. The calculated bulk modulus B ₀ = 196 GPa and the elastic moduli C ₁₁ = 338 GPa, C ₁₂ = 139 GPa, and C ₄₄ = 30 GPa indicate that the fullerite under investigation is a mechanically stable material. The inference is made that the simple cubic fullerite C₂₄ is a new diamond-like molecular zeolite with a unique combination of properties, such as the porosity and nonpolarizability, on the one hand, and the mechanical strength, chemical inertness, and high thermal conductivity, on the other hand. The simple cubic fullerite C₂₄ can be considered a promising low-dielectric-constant (low-k) material (?₀ < 5.7) for use in fabricating interconnections and substrates intended for integrated circuits and nanoelectronics.     

Metallic films forming on the surface of alkali-halide crystals during thermal diffusion of intracrystalline immpurities

It was detected for the first time that films consisting of a transition-metal-based structure form (via thermal diffusion of intracrystalline impurities) on the surface of alkali-halide (LiF, NaF) crystals activated by transition metals Co, Ni, or Mn. The thickness, density, and composition of the films are shown to be different, depending on the heat treatment conditions. The crystals were annealed at temperatures varying from 473 to 1073 K in vacuum and air. The surface structures forming upon annealing in vacuum exhibit magnetic properties. The films were studied by optical, x-ray fluorescence, and electron spectroscopy to reveal the mechanisms of transition-metal film formation during thermal annealing.     

Electrochemical formation and composition analysis of Zn x Cd1-x Se solid solutions

The direct growth of ZnSe–CdSe solid solution onto metallic cathodes by electrodeposition from acidic aqueous sulphate solutions is described. The plating process is studied by simple voltammetry, while the structure and composition of the electrolytic deposits are investigated by X-ray diffraction. The experimental d-spacing values of the as-grown mixed lattice are compared to data from reference Zn _x Cd_1-x Se pellets of standard composition, produced by a sintering method. The findings are supplemented with energy-dispersive X-ray (EDX) elemental analysis. Thereupon, the variation of the mole fraction x in Zn _x Cd_1-x Se, and the solid phase constitution of the electrodeposits are determined and correlated to the electrochemical conditions of growth. The resulting films contain admixtures of CdSe compound and metallic Cd.     

Polymeric derivatives of dipterocarpol, a dammarane triterpenoid

Polymeric derivatives of dammarane triterpenoids with both labile and strong (covalent) polymer-triterpenoid bonds were prepared from N-vinylpyrrolidone copolymers.