An algorithm for decomposing a polynomial system into normal ascending sets

We present an algorithm to decompose a polynomial system into a finite set of normal ascending sets such that the set of the zeros of the polynomial system is the union of the sets of the regular zeros of the normal ascending sets.If the polynomial system is zero dimensional,the set of the zeros of the polynomials is the union of the sets of the zeros of the normal ascending sets.     

Terminal control in flat systems

The article considers the application of dynamical feedback control to a special class of nonlinear dynamical systems — so-called flat systems. Flat system, linearizing output, and Lie-Backlund isomorphism are among the concepts reviewed. A man-machine algorithm is proposed for solving the terminal control problem for an arbitrary flat system with known linearizing outputs. __________ Translated from Nelineinaya Dinamika i Upravlenie, No. 3, pp. 191–200, 2003.     

Estimates from Below for the Spectral Function and for the Remainder in Local Weyl’s Law

We obtain asymptotic lower bounds for the spectral function of the Laplacian and for the remainder in local Weyl’s law on manifolds. In the negatively curved case, thermodynamic formalism is applied to improve the estimates. Key ingredients of the proof include the wave equation parametrix, a pretrace formula and the Dirichlet box principle. Our results develop and extend the unpublished thesis of A. Karnaukh [Ka]. The first author was supported by NSERC, FQRNT, Alfred P. Sloan Foundation Fellowship and Dawson Fellowship. The second author was supported by NSERC and FQRNT. Received: April 2006 Revision: October 2006 Accepted: October 2006     

Squeezed states and uncertainty relations since 1991

A brief review of the history of ten workshops/conferences on “Squeezed States and Uncertainty Relations” and main achievements in the related fields of quantum physics for the period from 1991 to 2007 are presented.     

Electrodynamic properties of nanoporous silicon in the range from terahertz to infrared frequencies

The dielectric response (conductivity and permittivity) spectra of a series of nanoporous silicon samples prepared by anodization of low-resistivity single-crystal silicon are measured, for the first time, using terahertz and IR spectroscopy in the frequency range 7–4000 cm^?1 at room temperature. The spectra obtained are analyzed in terms of the effective medium theory with a size-dependent dielectric response function of nanoinclusions and averaged dielectric characteristics of the surrounding medium. The geometric and dielectric characteristics of silicon nanoinclusions are determined. The dielectric properties of inclusions are found to be affected by nanosize effects, namely, carrier scattering at crystallite boundaries and a broadening of the band gap due to quantum confinement. The spectra of the samples prepared by adding iodine to the electrolyte exhibit a resonance at frequencies of 150–300 cm^?1. The nature of the resonance can be associated with the presence of chemisorbed iodine on the surface of porous silicon. Possible mechanisms responsible for the changes in broadband conductivity and permittivity spectra of single-crystal silicon upon transformation into a nanoporous structure are discussed.     

Anomalous electric-field effect and glassy behaviour in granular aluminium thin films: electron glass?

We present a study of non-equilibrium phenomena observed in the electrical conductance of insulating granular aluminium thin films. An anomalous field effect and its slow relaxation are studied in some detail. The phenomenology is very similar to the one already observed in indium oxide. The origin of the phenomena is discussed. In granular systems, the present experiments can naturally be interpreted along two different lines. One relies on a slow polarisation in the dielectric surrounding the metallic islands. The other one relies on a purely electronic mechanism: the formation of an electron Coulomb glass in the granular metal. More selective experiments and/or quantitative predictions about the Coulomb glass properties are still needed to definitely distinguish between the two scenarios.     

Catalytic partial oxidation of methane using RhSr- and Ni-substituted hexaaluminates

This paper reports the results of experimental and modeling efforts to characterize partial oxidation of methane to produce synthesis gas (H₂ and CO) using metal-substituted hexaaluminate catalysts in short-contact-time reactors. Hexaaluminate catalysts offer excellent high-temperature stability compared to the equivalent metal-based catalysts. The hexaaluminates are synthesized by a metal-exchange process using alumoxane precursors that enable a wide range of metal substitutions. Of all the combinations tested, RhSr-substituted hexaaluminates yielded the best performance. The catalysts are supported on alumina porous-foam structures, which are positioned within a tube furnace to control the operating temperature. Two-stage combinations of RhSr- and Ni-substituted hexaaluminates are shown to improve conversion activity and selectivity compared to a single-catalyst system.     

Improved experimental tracking techniques for validating discrete element method simulations of tumbling mills

We report on further developments in the three-dimensional tracking of a particle deep within the tumbling ball charge of an experimental mill. The experimental X-ray program employing the use of bi-planar X-ray angiography now includes the tracking of a typical 6 mm bulk charge particle in three dimensions with a spatial resolution that is accurate to within 0.15 mm. The improved experimental tracking techniques presented were developed for the purpose of generating accurate three-dimensional particle trajectory data against which to validate a numerical method for the simulation of discrete media, namely the discrete element method (DEM). These improvements are complimented with techniques for comparing charge profiles between numerical DEM simulations and three-dimensional experimental trajectory data.     

The effect of nanoparticle shape on polymer‐nanocomposite rheology and tensile strength

Nanoparticles can influence the properties of polymer materials by a variety of mechanisms. With fullerene, carbon nanotube, and clay or graphene sheet nanocomposites in mind, we investigate how particle shape influences the melt shear viscosity η and the tensile strength τ, which we determine via molecular dynamics simulations. Our simulations of compact (icosahedral), tube or rod‐like, and sheet‐like model nanoparticles, all at a volume fraction ? ≈ 0.05, indicate an order of magnitude increase in the viscosity η relative to the pure melt. This finding evidently can not be explained by continuum hydrodynamics and we provide evidence that the η increase in our model nanocomposites has its origin in chain bridging between the nanoparticles. We find that this increase is the largest for the rod‐like nanoparticles and least for the sheet‐like nanoparticles. Curiously, the enhancements of η and τ exhibit opposite trends with increasing chain length N and with particle shape anisotropy. Evidently, the concept of bridging chains alone cannot account for the increase in τ and we suggest that the deformability or flexibility of the sheet nanoparticles contributes to nanocomposite strength and toughness by reducing the relative value of the Poisson ratio of the composite. The molecular dynamics simulations in the present work focus on the reference case where the modification of the melt structure associated with glass‐formation and entanglement interactions should not be an issue. Since many applications require good particle dispersion, we also focus on the case where the polymer‐particle interactions favor nanoparticle dispersion. Our simulations point to a substantial contribution of nanoparticle shape to both mechanical and processing properties of polymer nanocomposites. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1882–1897, 2007     

Graphitic nanofillers in PMMA nanocomposites—An investigation of particle size and dispersion and their influence on nanocomposite properties

Mechanical, thermal, and electrical properties of graphite/PMMA composites have been evaluated as functions of particle size and dispersion of the graphitic nanofiller components via the use of three different graphitic nanofillers: “as received graphite” (ARG), “expanded graphite,” (EG) and “graphite nanoplatelets” (GNPs) EG, a graphitic materials with much lower density than ARG, was prepared from ARG flakes via an acid intercalation and thermal expansion. Subsequent sonication of EG in a liquid yielded GNPs as thin stacks of graphitic platelets with thicknesses of ～10 nm. Solution‐based processing was used to prepare PMMA composites with these three fillers. Dynamic mechanical analysis, thermal analysis, and electrical impedance measurements were carried out on the resulting composites, demonstrating that reduced particle size, high surface area, and increased surface roughness can significantly alter the graphite/polymer interface and enhance the mechanical, thermal, and electrical properties of the polymer matrix. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2097–2112, 2007