The Effects of Various Alcohols on the Stability of Melittin: A Molecular Dynamics Study

In this study, 200 ps molecular dynamics simulations were conducted to investigate the effects of various alcohols on the structural stability of melittin. The averaged helicity of melittin remained 80% in pure butanol, whereas it was below 60% both in pure water and in pure methanol. The α‐helix propensity of melittin increased with the aliphatic chain length of the alcohol. Charge‐charge interaction between Lys21 and Arg24 and polar‐nonpolar interaction between Trp19 and Arg22 are probably responsible for the higher structural integrity of the C‐terminal α‐helix over the N‐terminal one. The weaker dielectric constant of longer aliphatic chain length of alcohol possibly reduces the hydrogen bonding between amide protons and surrounding solvent molecules and simultaneously promotes the intramolecular hydrogen bonding in melittin and therefore stabilizes the secondary structure of melittin. The effect of various alcohols on stabilizing melittin is most likely due to their ability to form clusters on the surface of melittin effectively, favoring the formation of intramolecular hydrogen bonds instead of intermolecular hydrogen bonds and promoting the formation of stable α‐helices.     

Synthesis and characterization of spirobifluorene‐based polyimides

The synthesis and properties of organosoluble aromatic polyimides, containing spiro‐skeletal units in the polymer backbone on the basis of the spiro‐diamine monomer, 2,2′‐diamino‐9,9′‐spirobifluorene, are described. In the case of the spiro segment, the two fluorene rings are orthogonally arranged and connected through a tetrahedral bonding carbon atom, the spiro center. As a consequence, the polymer chain is periodically zigzagged with a 90° angle at each spiro center. This structural feature minimizes interchain interactions and restricts the close packing of the polymer chains, resulting in amorphous polyimides that have good solubility in organic solvents. Compared with their fluorene‐based cardo analogues, the spirobifluorene‐based polyimides have an improved solubility. Furthermore, the main‐chain rigidity of the polyimide appears to be preserved because of the presence of the spiro structure, which restricts the free segmental mobility. As a result, these polyimides exhibit a high glass‐transition temperature (T_g's) and good thermal stability. The T_g's of these polyimides were in the range of 287–374 °C, and the decomposition temperatures in nitrogen for a 10% weight loss occurred at temperatures above 570 °C. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3615–3621, 2002     

Total Synthesis of (±)‐Glyflavanone by a Rigid Quaternary Ammonium Salt

Total synthesis of (±)‐glyflavanones and glychalcones was accomplished starting from the known 1‐(5‐hydroxy‐7‐methoxy‐2,2‐dimethyl‐2H‐chromen‐6‐yl)ethanone ( 6 ). A new approach to synthesis of flavanones, based on a high yielding N‐benzylcinchoninium salt catalyzed chromane ring forming enantio‐selective cyclization process, is described. Also, synthesis of (+)‐glyflavanone 1 , the natural enantiomer, was achieved through optical resolution of a key intermediate in racemic synthesis.     

Chemical reaction dynamics of Rydberg atoms with neutral molecules: a comparison of molecular-beam and classical trajectory results for the H(n)+D2-->HD+D(n') reaction

Recent molecular-beam experiments have probed the dynamics of the Rydberg-atom reaction, H(n)+D2-->HD+D(n) at low collision energies. It was discovered that the rotationally resolved product distribution was remarkably similar to a much more limited data set obtained at a single scattering angle for the ion-molecule reaction H++D2-->D++HD. The equivalence of these two problems would be consistent with the Fermi-independent-collider model (electron acting as a spectator) and would provide an important new avenue for the study of ion-molecule reactions. In this work, we employ a classical trajectory calculation on the ion-molecule reaction to facilitate a more extensive comparison between the two systems. The trajectory simulations tend to confirm the equivalence of the ion+molecule dynamics to that for the Rydberg-atom+molecule system. The theory reproduces the close relationship of the two experimental observations made previously. However, some differences between the Rydberg-atom experiments and the trajectory simulations are seen when comparisons are made to a broader data set. In particular, the angular distribution of the differential cross section exhibits more asymmetry in the experiment than in the theory. The potential breakdown of the classical model is discussed. The role of the "spectator" Rydberg electron is addressed and several crucial issues for future theoretical work are brought out.     

Simultaneous measurement of serotonin, catecholamines and their metabolites in cat and human plasma by in vitro microdialysis-microbore high-performance liquid chromatography with amperometric detection.

A method for the simultaneous measurement of norepinephrine, epinephrine, dopamine, 3,4-dihydroxyphenylacetic acid, homovanillic acid, serotonin and 5-hydroxyindole-3-acetic acid in cat and human plasma by in vitro microdialysis-microbore high-performance liquid chromatography with electrochemical detection is described. The detection limit (signal-to-noise ratio = 3) is about 0.05-0.1 pg per injection. The volume of plasma samples required is very small (< 200 microliters), hence there is minimal blood loss in repeated blood sampling, especially in experiments using small animals. Within 15 min, a fast isocratic separation of these analytes by using a microbore reversed-phase ODS column is achieved, hence over 90 analyses can be performed in a single working day. As microdialysis per se is not destructive to plasma samples, the remaining plasma sample and perfusate can be repeatedly analysed for other substances. This simple, efficient and sensitive method can therefore be used as a routine clinical and basic research technique in the investigation of blood biogenic amines and their metabolites.     

Controlling of Solution Concentration on Nucleation During Hydrothermal Synthesis of Analcime

Hydrothermal experiments of analcime nucleation and glass dissolution were carried out in autoclaves under the conditions of autogeneous pressures, temperatures of 150 °C ～ 210 °C, and 0.25 M ～ 0.75 M NaOH solutions. The curves of the glass dissolution and analcime formation are S‐shaped. Yet, the two curves are essentially parallel to each other. The time required for a complete dissolution of glass or the commencement of analcime formation is shorter when the concentration of NaOH solution or the temperature is higher. The amount of the weight percent of analcime synthesized is obviously less than the glass dissolved at a given time of an experiment. The weight difference between glass dissolved and analcime (dehydrated) formed is calculated to be represented as the solution concentration. During an experiment, the solution concentration increases gradually to a maximum, then decreases slowly to a constant value with time. On the other hand, nucleation is also gradually increased to a maximum, then is decreased finally to zero with time in a bell‐shaped curve. It is clear that nucleation of analcime is mainly controlled by the solution concentration.     

Preparation and Properties of Some Wood-Plastic Cornbinations Involving Some Tropical Commercial Woods

Radiation-induced wood-polymer composites have been prepared using some tropical commercial woods. These included Kapur (Dryobalanop sp.), Kempas (Koompassia sp.), Red Seraya (Shorea sp.), White Seraya (Parashorea sp.), and Jelutong (Dyera sp.). The wood specimens were modified by impregnation with monomers and followed by exposure to gamma radiation. Monomer systems used were methyl methacrylate, methyl methacrylate with 5% dioxane, acrylonitrile, 60:40 styrene-acrylonitrile comonomer, vinyl acetate, and vinylidene chloride. The resulting composite specimens exhibited significant increases in hardness and compressive strength, the extent of which appeared to depend on the amount and type of polymer present. Dimensional stability increased when the woods were impregnated with polymethyl methacrylate and improved further to about 35% on addition of a swelling agent, dioxane. Wood-polyvinylidene chloride composites gave high fire resistance as opposed to wood-polymethyl methacrylate which showed increased flammability. A 4-fold decrease in weight loss was observed in the fire-tube and crib tests conducted. The impregnated polymers were not totally resistant to termites. The polymers, not being nutrients, reduced the number of survivals after a 90-d test period. Polystyrene-acrylonitrile appeared toxic to the termites.     

Synthesis and characteristics of poly(methacrylic acid‐co‐N‐isopropylacrylamide) thermosensitive composite hollow latex particles and their application as drug carriers

In this work, the poly(methacrylic acid‐co‐N‐isopropylacrylamide) thermosensitive composite hollow latex particles was synthesized by a three‐step reaction. The first step was to synthesize the poly(methyl methacrylate‐co‐methacrylic acid) (poly(MMA‐MAA)) copolymer latex particles by the method of soapless emulsion polymerization. The second step was to polymerize methacrylic acid (MAA), N‐isopropylacrylamide (NIPAAm), and N,N′‐methylenebisacrylamide in the presence of poly(MMA‐MAA) latex particles to form the linear poly(methyl methacrylate‐co‐methacrylic acid)/crosslinking poly(methacrylic acid‐co‐N‐isopropylacrylamide) (poly(MMA‐MAA)/poly(MAA‐NIPAAm)) core–shell latex particles. In the third step, the core–shell latex particles were heated in the presence of ammonia solution to form the crosslinking poly(MAA‐NIPAAm) thermosensitive hollow latex particles. The morphologies of poly(MMA‐MAA)/poly(MAA‐NIPAAm) core–shell latex particles and poly(MAA‐NIPAAm) hollow latex particles were observed. The influences of crosslinking agent and shell composition on the lower critical solution temperature of poly(MMA‐MAA)/poly(MAA‐NIPAAm) core–shell latex particles and poly(MAA‐NIPAAm) hollow latex particles were, respectively, studied. Besides, the poly(MAA‐NIPAAm) thermosensitive hollow latex particles were used as carriers to load with the model drug, caffeine. The effect of various variables on the amount of caffeine loading and the efficiency of caffeine release was investigated. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5203–5214     

Solid‐State Luminescence of Au?Cu?Alkynyl Complexes Induced by Metallophilicity‐Driven Aggregation

A new series of homoleptic alkynyl complexes, [{Au₂Cu₂(C₂R)₄}_n] (R=C₃H₇O ( 1 ), C₆H₁₁O ( 2 ), C₉H₁₉O ( 3 ), C₁₃H₁₁O ( 4 )), were obtained from Au(SC₄H₈)Cl, Cu(NCMe)₄PF₆, and the corresponding alkyne in the presence of a base (NEt₃). Complexes 1 – 4 aggregate upon crystallization into polymeric chains through extensive metallophilic interactions. The cluster that contains fluorenolyl functionalities, C₁₃H₉O ( 5 ), crystallizes in its molecular form as a disolvate, [Au₂Cu₂(C₂C₁₃H₉O)₄] ? 2 THF. The substitution of weakly bound THF molecules with pyridine molecules leads to the complex [Au₂Cu₂(C₂C₁₃H₉O)₄] ? 2 py ( 6 ), thus giving two polymorphs in the solid state. Such structural diversity is established through metal‐chain and hydrogen‐bond formation, which depends on the stereochemical characteristics of the organic ligands. More interestingly, this solid‐state structural arrangement affords good emission properties, such as intensity and spectroscopic profile, which are otherwise very weakly emissive in solution. Metallophilic aggregation of the {Au₂Cu₂} cluster units, as observed in the crystals, results in dramatic enhancement of the room‐temperature phosphorescence, thereby reaching a maximum quantum efficiency of 95 % ( 4 ). A theoretical approach further indicates a synergistic effect of the array of the metal chain upon aggregation, which greatly enhances the spin‐orbit coupling and, hence, the phosphorescence, thereby opening up a new direction in the field of aggregate‐enhanced emission.     

Synthesis and morphology of an iron oxide/polystyrene/poly(isopropylacrylamide‐co‐methacrylic acid) thermosensitive magnetic composite latex with potassium persulfate as the initiator

In this work, an iron oxide (Fe₃O₄)/polystyrene (PS)/poly(N‐isopropylacryl amide‐co‐methacrylic acid) [P(NIPAAM–MAA)] thermosensitive magnetic composite latex was synthesized by the method of two‐stage emulsion polymerization. The Fe₃O₄ particles were prepared by a traditional coprecipitation method and then surface‐treated with either a PAA oligomer or lauric acid to form a stable ferrofluid. The first stage for the synthesis of the thermosensitive magnetic composite latex was to synthesize PS in the presence of a ferrofluid by emulsion polymerization to form Fe₃O₄/PS composite latex particles. Following the first stage of reaction, the second stage of polymerization was carried out with N‐isopropylacryl amide and methacrylic acid as monomers and with Fe₃O₄/PS latex as seeds. The Fe₃O₄/PS/[P(NIPAAM–MAA)] thermosensitive magnetic particles were thus obtained. The effects of the ferrofluids on the reaction kinetics, morphology, and particle size of the latex were discussed. A reaction mechanism was proposed in accordance with the morphology observation of the latex particles. The thermosensitive property of the thermosensitive magnetic composite latex was also studied. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3062–3072, 2007