Quantum chemical studies of azoles

The results of theoretical search for model transition states of the electrophilic substitution reaction in 2H-tetrazole (1) without the preliminary formation of N-protonated azolium salts are presented for two routes that were previously suggested by the authors and thermodynamically investigated: A, the attack of molecule 1 by the nucleophile (HO^–(aq)) to form the anion to which the electrophile H₃O⁺(aq)) is added and B, the attack of molecule 1 by the same electrophile followed by the addition of the same nucleophile to the specifically solvated protonated species formed in the preceding reaction step. The calculations were performed using the DFT/B3LYP/6-31G(d) method and the scanning procedure of the potential energy surface (PES). Both steps of route A turned out to be nearly barrierless, while in route B only its first step is barrierless and the second one is conjugated with passing an activation barrier of ～45 kcal mol^–1 between non-interacting or weakly interacting reactants and electrophilic substitution products. Unlike the specifically solvated protonated species of 1H-tetrazole in an aqueous solution, a similar species of 2H-tetrazole does not form a prereaction complex with the attacking nucleophile (HO^–(aq)) and the five-membered ring is destroyed in fact in the nitrogen-containing reaction product formed after passing the activation barrier. The optimized structure of the transition state differs strongly from the nitrogen-containing structure of the reaction product with the destroyed ring, which was found by scanning of the PES.     

Addition of phenylacetylene and camphor to the complex [(dpp-bian)Eu(dme)<Subscript>2</Subscript>] (dpp-bian is the 1,2-bis[(2,6-diisopropylphenyl)imino]acenaphthene dianion)

The reduction of 1,2-bis[(2,6-diisopropylphenyl)imino]acenaphthene (dpp-bian) with an excess of europium metal in 1,2-dimethoxyethane (dme) produces a divalent europium complex with the dpp-bian dianion, [(dpp-bian)Eu(dme)₂] (1). The reactions of 1 with phenyl-acetylene and camphor proceed via protonation of the diimine ligand to form the monomeric amido-amino complexes of divalent europium — [H(dpp-bian)Eu(C≡CPh)(dme)₂] (2) and [H(dpp-bian)Eu(camphor)(dme)₂] (3), respectively. Compounds 2 and 3 were characterized by IR spectroscopy and elemental analysis. Their molecular structures were determined by X-ray diffraction. Compounds 2 and 3 were shown to be monomeric seven-coordinate europium(ii) complexes with terminal phenylethynyl and enol ligands, respectively. According to the IR spectroscopic data, the terminal ligands in complexes 2 and 3 undergo tautomerization involving backward proton transfer from the amido-amino ligand to the substrate. The magnetic moment of compound 2 (8.03 μB) remains constant in the temperature range of 4—300 К and confirms the presence of divalent europium.     

Fe-containing nanocomposites based on a biocompatible copolymer 1-vinyl-1,2,4-triazole with <Emphasis Type="Italic">N</Emphasis>-vinylpyrrolidone

New polymer nanocomposites containing iron oxide nanoparticles stabilized with a biocompatible copolymer of 1-vinyl-1,2,4-triazole with N-vinylpyrrolidone were produced. The synthesis was conducted using the method of chemical reduction of iron ions with hydrazine hydrate in an aqueous medium in the presence of a polymer matrix. The ESR spectroscopy data showed that the core—shell type nanoparticles were obtained. The core generally consistsed of zero-valence iron coated with an oxide shell. According to the data of transmission electron microscopy, the obtained polymer nanocomposites consisted of nanoparticles of mainly spherical shape with a diameter from 1 to 14 nm. Aggregates formed from individual stabilized nanoparticles of up to 75 nm in size (in most cases) were also observed. These aggregated particles were found to self-organize and form branched chains. Nanocomposites were characterized by a different particle-size distribution, which was determined by the initial ratio of the copolymer and the precursor of iron nanoparticles.     

Synthesis of complexes of N-vinylpyrrolidone–vinylamine or N-vinylpyrrolidone–allylamine containing macrocyclic polyligand 1,4,7,10-tetraazacyclododecane-1,4,7,10-tetraacetate (DOTA) with gallium-68 isotope and estimation of their in vivo distribution

Russian Chemical Bulletin - A method for radiolabeling the water-soluble N-vinylpyrrolidone copolymers with N-vinyl- and N-allylamine containing bifunctional chelation unit...     

NO-donating and hemolytic activity of tetranitrosyl iron complexes with ligands of the 2-mercaptopyridine series

Russian Chemical Bulletin - The NO-donating and hemolytic activity of the binuclear tetranitrosyl iron complexes (TNIC) with thiolate ligands of the composition [Fe2(SR)2(NO)4], where R is...     

Gas-phase fragmentation studies of biotinylated oligomannuronopyranosides under conditions of collisionally activated dissociation

Russian Chemical Bulletin - High-resolution electrospray ionization mass spectra (MS and MS/MS) of a series of glycoconjugates containing biotin and oligomannuronopyranosyl residues linked via a...     

Checking of applicability of conditions for reaching the limiting-current mode to flow-by porous electrodes

For the flow-by porous electrodes, which differ in thickness, specific surface area, solution flow rate, and a ratio between the phase conductivities, the conditions providing the limiting-current mode over the entire electrode surface at nearly 100% current efficiency are determined using the method of successive refinement of total current and profile of its distribution along the solution flow. The used values of electrode thickness L are compared with available estimates for the limiting thickness of porous electrode L _lim derived for the ideal limiting-current mode and calculated using real values of the width of the limiting-current plateau of overall polarization curve, solution conductivity, and the diffusion limiting current in the zone of solution input into the electrode. It is found that these values are close to each other in all cases. The largest error of estimation of L _lim does not exceed 10% indicating that it can be used for preliminary estimation of the conditions for reaching the limiting-current mode for the flow porous electrodes of this type.     

Electrochemical oxidation of thrombin on carbon screen printed electrodes

The electrochemical oxidation of thrombin on the surface of carbon screen printed electrodes was studied. The electrochemical activity of thrombin was predicted, using bioinformation analysis, based on the data about the electrochemical properties of amino acids. The number of potentially electroactive amino acid residues, namely, tyrosine (Tyr), tryptophan (Trp), cysteine (Cys), histidine (His), methionine (Met), and cystine (Cys-Cys) located on the protein surface and orientated by their electroactive groups toward the electrode surface, i.e., accessible for electrochemical oxidation was calculated. The theoretical data were confirmed experimentally by cyclic and square-wave voltammetry. The available data on the protein structure allowed us to attribute the recorded electrochemical signals of thrombin oxidation to certain types of amino acid residue: the oxidation peak with a potential maximum at 0.7–0.8 V (vs. Ag/AgCl) was attributed to the oxidation of the Trp and Tyr residues; the wave in the range 1.0–1.2 V, to the oxidation of His; and the wave at 1.2–1.5 V, to the oxidation of Met and Cys-Cys. The electroanalysis based on the oxidation peak of the Tyr and Trp amino acid residues allowed to detect thrombin up to the concentration of 10^–7 M. The suggested strategy for predicting the electrochemical activity can be used for investigating the properties of many other proteins and peptides and serve as a basis for their quantitative determination when developing various sensor and biosensor devices.     

The synthesis,structure, and electrochemical properties of Li<Subscript>2</Subscript>FeSiO<Subscript>4</Subscript>-based lithium-accumulating electrode material

Different approaches to synthesis of Li₂FeSiO₄-based electrode materials for lithium intercalation, using low-cost and abundant Li-, Si-, and Fe-containing parent substances, are discussed. XRD, SEM, and a laser-diffraction analyzer of particle size were used for structure and morphology characterization of the composite electrode materials. Li₂FeSiO₄ was shown to be the main lithium-accumulating crystalline phase; minor LiFeO₂ and Li₂SiO₃ admixtures are also present. The material microparticles’ average size was shown to vary from tenths of micrometer to 1 μm. Larger objects sized ca. 2–4 μm are the microparticles’ agglomerates. The material electrochemical properties were studied by dc chronopotentiometry (galvanostatic charging–discharging) and cyclic voltammetry with potential linear sweeping. The initial reversible cycled capacity of the best samples is 170 mA h/g. The anodic and cathodic processes manifest obvious hysteresis caused by the presence of several different lithium ion energy states in the material; the transition between the states is kinetically hindered. The dependences of the specific capacity and its stability under cycling on the current load and the conductive carbon component content in the composite were elucidated.