Molecular batteries: ferrocenylsilylation of dendrons, dendritic cores, and dendrimers: new convergent and divergent routes to ferrocenyl dendrimers with stable redox activity

The ferrocenylsilylation of the phenol triallyl dendron 2, of the phenol nonaallyl dendron 4, and of the 9-, 27-, 81-, and 243-allyl dendrimers 7-10 (monitored by the disappearance of the signals of the olefinic protons in 1H NMR spectra) has been achieved using ferrocenyldimethylsilane 1 and Karstedt's catalyst in diethyl ether at 40 degrees C, yielding the corresponding ferrocenyl dendrons and dendrimers. An alternative convergent synthesis of the nonaferrocenyl dendron 5 was carried out by reaction of the triferrocenyl dendron 2 with a protected triododendron followed by deprotection. Reaction of the nonaferrocenyl dendron 5 with hexakis(bromomethyl)benzene gave the 54-ferrocenyl dendron 6. All the ferrocenyl dendron and dendrimers produce a chemically and electrochemically reversible ferrocenyl oxidation wave at seemingly the same potential. Stable platinum electrodes modified with the high ferrocenyl dendrimers were fabricated. The soluble orange-red ferrocenyl dendrimers can also be oxidized in CH2Cl2 by [NO][PF6] to the insoluble deep blue polyferrocenium dendrimers. For instance, the 243-ferrocenium dendrimer has been characterized by its Mossbauer spectrum, which is of the same type as that of ferrocenium itself. The ferrocenium dendrimers can be reduced without any decomposition back to the ferrocenyl dendrimer, indicating that these multielectronic redoxstable dendrimers behave as molecular batteries.     

Characterizing the ZrC(111)/c-ZrO2(111) Hetero-Ceramic Interface: First Principles DFT and Atomistic Thermodynamic Modeling

The mechanical and physical properties of zirconium carbide (ZrC) are limited to its ability to deteriorate in oxidizing environments. Low refractory oxides are typically formed as layers on ZrC surfaces when exposed to the slightest concentrations of oxygen. However, this carbide has a wide range of applications in nuclear reactor lines and nozzle flaps in the aerospace industry, just to name a few. To develop mechanically strong and oxygen-resistant ZrC materials, the need for studying and characterizing the oxidized layers, with emphasis on the interfacial structure between ZrC and the oxidized phases, cannot be understated. In this paper, the ZrC(111)//c-ZrO₂ (111) interface was studied by both finite temperature molecular dynamic simulation and DFT. The interfacial mechanical properties were characterized by the work of adhesion which revealed a Zr|OO|Zr|OO//ZrC(111) interface model as the most stable with an oxygen layer from ZrO₂ being deposited on the ZrC(111) surface. Further structural analysis at the interface showed a crack in the first ZrO₂ layer at the interfacial region. Investigations of the electronic structure using the density of state calculations and Bader charge analysis revealed the interfacial properties as local effects with no significant impacts in the bulk regions of the interface slab.     

Dipolar and V-shaped structures incorporating methylenepyran and diazine fragments

Thirteen novel dipolar and V-shaped chromophores with pyranylidene electron-donating part, diazine electron-withdrawing part and various π-linkers were synthesized. The extent of intramolecular charge transfer, structure-property relationships and optical properties were further investigated by UV/Vis absorption, electrochemistry, and DFT calculations.     

Study of the O-glycidylation of natural phenolic compounds. The relationship between the phenolic structure and the reaction mechanism

The O-alkylation reaction by epichlorohydrin of some natural phenolic compounds such as 4-methylcatechol, gallic acid, protocatechuic acid, pyrogallol and resorcinol was investigated. Phenolic compounds reacted first with epichlorohydrin in the presence of benzyltriethylammonium chloride as phase transfer catalyst. Then, an aqueous solution of sodium hydroxide was added.It was demonstrated that the two competitive mechanisms involved in the O-alkylation reaction were highly dependent of the starting material. The O-alkylated products obtained in this reaction could be further used as bisphenol A substitutes in the synthesis of epoxy resins pre-polymers.     

Biobased vinyl levulinate as styrene replacement for unsaturated polyester resins

Vinyl levulinate (VL) is used as a biobased reactive diluent in styrene (St)‐free unsaturated polyester resins (UPR). The reactivity ratios for the radical copolymerization of VL with diethyl fumarate (DEF) are determined by the Jaacks method (r_VL = 0.01 and r_DEF = 0.81 at 60 °C in DMSO‐d₆). The properties of UPRs having a stoichiometric ratio between unsaturated groups from the UPR and either St or VL are compared. Defect‐free, slightly yellow, transparent, and rigid thermosets are obtained after a mild curing cycle. Due to unfavorable reactivity ratios about 5.5 wt % of unpolymerized VL remains inside the network and acts as plasticizer. Consequently, compared with St‐based ones, VL‐based UPRs exhibit lower α relaxation (T_α = 180 and 100 °C, respectively), lower elastic moduli at the rubbery plateau (G′ = 10⁸ and 10⁷ Pa) and lower mechanical properties as measured by three points bending tests. Strain at break (ε_f = 1.8 ± 0.2%) and Charpy impact strength (～2.7 ± 0.3 kJ m^?2) are comparable independently of the RD chemical nature. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3356–3364     

Understanding the Reshaping of Fluorinated Polyester Vitrimers by Kinetic and DFT Studies of the Transesterification Reaction

Vitrimers are a third class of polymers gathering the mechanical properties and solvent resistance of 3D thermosets and the reprocessability of thermoplastics. This unique behaviour is due to the triggering of certain covalent exchange reactions that allow the network to rearrange upon application of a stimulus. The constitutive feature of vitrimers is the adoption of a glass-like viscosity during the rearrangement of the network, often due to an associative mechanism for the exchange reaction. Transesterification networks are one of the most studied type of vitrimers that usually require the incorporation of a catalyst, implying the associated drawbacks. Following up on a recent report on catalyst-free transesterification vitrimers in which the ester functions are particularly reactive thanks to the presence of fluorine atoms in α- or β-position, parallel DFT calculations and an experimental kinetic study on model molecules are presented in order to quantitatively assess the effect of neighbouring fluorinated groups on the transesterification reaction rate.     

New eco-friendly animal bone meal catalysts for preparation of chalcones and aza-michael adducts

ABSTRACT: Two efficient reactions were successfully carried out using Animal Bone Meal (ABM) and potassium fluoride or sodium nitrate doped ABMs as new heterogeneous catalysts under very mild conditions. After preparation and characterization of the catalysts, we first report their use in a simple and convenient synthesis of various chalcones by Claisen-Schmidt condensation and then in an aza-Michael addition involving several synthesized chalcones with aromatic amines. All the reactions were carried out at room temperature in methanol; the chalcone synthesis was also achieved in water environment under microwave irradiation. Doping ABM enhances the rate and yield at each reaction. Catalytic activities are discussed and the ability to re-use the ABM is demonstrated. RESULTS: For Claisen-Schmidt the use of ABM alone, yields never exceeded 17%. In each entry, KF/ABM and NaNO3/ABM (79-97%) gave higher yields than using ABM alone under thermic condition. Also the reaction proceeded under microwave irradiation in good yields (72-94% for KF/ABM and 81-97% for NaNO3/ABM) and high purity. For aza-Michael addition the use of ABM doped with KF or NaNO3 increased the catalytic activity remarkably. The very high yields could be noted (84-95% for KF/ABM and 81-94% for NaNO3/ABM). CONCLUSION: The present method is an efficient and selective procedure for the synthesis of chalcones anaaza-Michael adducts. The ABM and doped ABMs are a new, inexpensive and attractive solid supports which can contribute to the development of catalytic processes and reduced environmental problems.