Validated TLC-densitometry method for the simultaneous analysis of pyrethroid insecticides in agricultural and domestic products

ABSTRACT: BACKGROUND: Pyrethroids are widely used for the control of pests and insects, as pyrethroids are believed to pose very little risk to human health and environment. However, exposure to the pyrethroids exceeding the label directions might adversely affect human health and environment. Hence a careful selection of environment friendly household product is required that must contain exactly the label claimed pyrethroids amount. RESULTS: A sensitive and robust TLC-densitometric method for simultaneous quantification of commonly used synthetic pyrethroids including esbiothrin, alpha-cypermethrin and cis/trans permethrin in agricultural and domestic products has been developed and validated. TLC aluminum plates, precoated with 0.2 mm thick layer of silica gel 60 F-254, were used for chromatographic process. Densitometric analysis of chromatoplates was carried out in absorbance mode at corresponding lamdamax of each pyrethroid. Equally valid common mobile phase for all pyrethroids consisted of hexane-dichloromethane-ethylacetate-formic acid (8:1.5:0.4:0.1 v/v/v/v) which provided sharp and symmetrical peaks of esbiothrin, alpha-cypermethrin, trans-permethrin and cis-permethrin, at Rf 0.31, 0.53, 0.6 and 0.65, respectively. Linear regression data for respective calibration curves showed a good linearity for all pyrethroids with r = 0.991-0.996. Limits of detection (LOD) and limits of quantification (LOQ) for all pyrethroids were found in the range of 1.6-2.8 and 4.9-8.5 ng/spot, respectively. CONCLUSIONS: The developed method is applicable for separating the mixture of pyrethroids and at the same time, it is also valid for separating their isomers. The method is reproducible, precise and accurate for the quantitative determination of pyrethroids in agricultural and domestic products.     

Stability indicating HPLC method for the simultaneous determination of moxifloxacin and prednisolone in pharmaceutical formulations

ABSTRACT: BACKGROUND: A simple, specific, and fast stability indicating reverse phase liquid chromatographic method was established for instantaneous determination of moxifloxacin and prednisolone in bulk drugs and pharmaceutical formulations. RESULTS: Optimum chromatographic separations among the moxifloxacin, prednisolone and stressinduced degradation products were achieved within 10 minutes by use of BDS Hypersil C8 column (250 X 4.6 mm, 5 mum) as stationary phase with mobile phase consisted of a mixture of phosphate buffer (18 mM) containing 0.1% (v/v) triethylamine, at pH 2.8 (adjusted with dilute phosphoric acid) and methanol (38:62 v/v) at a flow rate of 1.5 mL min-1. Detection was performed at 254 nm using diode array detector. The method was validated in accordance with ICH guidelines. Response was a linear function of concentrations over the range of 20-80 mug mL-1 for moxifloxacin (r2 [greater than or equal to] 0.998) and 40-160 mug mL-1 for prednisolone (r2 [greater than or equal to] 0.998). The method was resulted in good separation of both the analytes and degradation products with acceptable tailing and resolution. The peak purity index for both the analytes after all types of stress conditions was [greater than or equal to] 0.9999 indicated a complete separation of both the analyte peaks from degradation products. The method can therefore, be regarded as stabilityindicating. CONCLUSIONS: The developed method can be applied successfully for simultaneous determination of moxifloxacin and prednisolone in pharmaceutical formulations and their stability studies.     

Phytochemical analysis, cytotoxic activity and constituents-activity relationships of the leaves of Cinnamomum iners (Reinw. ex Blume-Lauraceae)

The leaves of Cinnamomum iners (Reinw. ex Blume-Lauraceae) have been refluxed successively with chloroform and alcohol to get chloroform extract and alcoholic extract. Both the extracts have been assayed for cytotoxicity against human colorectal tumour cells. The chloroform extract exhibited significant cytotoxicity with IC(50) 31?μg mL(-1) (p??200?μg mL(-1). The chloroform extract has been further proceeded for chemical analysis by GC-TOFMS and 178 components were identified including acids, amines, amides, aldehydes, alcohols, esters, benzene derivatives, bicyclic compounds, terpenes, hydrocarbons, naphthalene derivatives, furan derivatives, azulenes, etc. Nine components representing 51.73% of the total chloroform extract were detected as major components. Caryophyllene (14.41%) and Eicosanoic acid ethyl ester (12.17%) are the most prominent components of the chloroform extract. β-Caryophyllene (14.41%) as most abundant compound supports potent cytotoxicity as shown by chloroform extract.     

Graphene arrested in laponite-water colloidal glass

Graphene production in water from graphite sources is an important technological route toward harvesting the unique properties of this material. Graphene forms thermodynamically unstable dispersions in water, limiting the use of this solvent due to aggregation. We show that graphene-water dispersions can be controlled kinetically to produce graphene by using laponite clay. Laponite exhibits rapid gelation kinetics when dispersed in water above its gelation concentration, allowing graphene aggregation to be halted after exfoliation in water at ambient conditions. The transparency of laponite colloidal glass and films is important in examining the extent of graphene exfoliation.     

Determination of catecholamine in human serum by a fluorescent quenching method based on a water-soluble fluorescent conjugated polymer-enzyme hybrid system

In this paper, a sensitive water-soluble fluorescent conjugated polymer biosensor for catecholamine (dopamine DA, adrenaline AD and norepinephrine NE) was developed. In the presence of horse radish peroxidase (HRP) and H(2)O(2), catecholamine could be oxidized and the oxidation product of catecholamine could quench the photoluminescence (PL) intensity of poly(2,5-bis(3-sulfonatopropoxy)-1,4-phenylethynylenealt-1,4-poly(phenylene ethynylene)) (PPESO(3)). The quenching PL intensity of PPESO(3) (I(0)/I) was proportional to the concentration of DA, AD and NE in the concentration ranges of 5.0 × 10(-7) to 1.4 × 10(-4), 5.0 × 10(-6) to 5.0 × 10(-4), and 5.0 × 10(-6) to 5.0 × 10(-4) mol L(-1), respectively. The detection limit for DA, AD and NE was 1.4 × 10(-7) mol L(-1), 1.0 × 10(-6) and 1.0 × 10(-6) mol L(-1), respectively. The PPESO(3)-enzyme hybrid system based on the fluorescence quenching method was successfully applied for the determination of catecholamine in human serum samples with good accuracy and satisfactory recovery. The results were in good agreement with those provided by the HPLC-MS method.     

Physicochemical perspective of cyclodextrin nano and microaggregates

'Chemistry beyond the molecule' is the nickname for supramolecular chemistry. This branch of study is based on molecular recognition that is host-guest chemistry. A number of potential hosts have been defined and applied in scores of studies. Among all potential hosts, cyclodextrins occupy a high position due to their characteristic solubilisation capability and biocompatibility. In the present article we are revisiting the host-guest aspects of cyclodextrins from a physicochemical perspective. We present details of formation and applications of cyclodextrin nanoaggregates induced by guest molecules, the concerned thermodynamics behind the process and also the effect of concentration of the guest molecules on the morphology of the aggregates. This article reviews the topic mainly from the spectroscopic point of view.     

Quadrupole mass filter operation under the influence of magnetic field

This work demonstrates resolution enhancement of a quadrupole mass filter (QMF) under the influence of a static magnetic field. Generally, QMF resolution can be improved by increasing the number of rf cycles an ion experiences when passing through the mass filter. In order to improve the resolution, the dimensions of the QMF or the operating parameters need to be changed. However, geometric modifications to improve performance increase the manufacturing cost and usually the size of the instrument. By applying a magnetic field, a low‐cost, small footprint instrument with reduced power requirements can be realized. Significant improvement in QMF resolution was observed experimentally for certain magnetic field conditions, and these have been explained in terms of our theoretical model developed at the University of Liverpool. This model is capable of accurate simulation of spectra allowing the user to specify different values of mass spectrometer dimensions and applied input signals. The model predicts enhanced instrument resolution R>26 000 for a CO₂ and N₂ mixture with a 200‐mm long mass filter operating in stability zone 3 via application of an axial magnetic field. Copyright © 2013 John Wiley & Sons, Ltd.     

Effect of macropore convection on mass transfer in a bidisperse adsorbent particle

The importance of adsorption induced convection in the macropores of a bidisperse adsorbent particle is studied for a step change in mole fraction or total pressure at the surface of the particle. Material balance equations for a binary gas mixture are written for both the macropores and the macropores with allowance for convection in the macropores, which is described by Darcy's law. The coupled set o1' partial differential equations is solved by orthogonal collocation. The enhancement in mass transfer as a result of convection is assessed by comparing the fractional uptake curves obtained with and without allowance for convection. Both equilibrium-based and kinetic-based separation processes are considered. The effect of the presence of convection in determining the controlling diffusional resistance (macropore or micropore) is also examined. Due to inclusion of convection no single non-dimensional group alone can determine the relative importance of macropore and micropore resistances. Results show that convection can significantly affect the performance of an equilibrium-based macropore diffusion controlled process and that the enhancement in mass transfer is more for a particle with a high value of Darcy permeability.     

Synthesis and antimycobacterial activity of some beta-carboline alkaloids

In view of the attributed medicinal properties of beta-carboline alkaloids, some new O-acyl derivatives of beta-carboline alkaloid--harmol, were prepared and tested for possible antimycobacterial activity against Mycobacterium tuberculosis H37Rv.     

Composition-controlled synthesis of bimetallic gold-silver nanoparticles

This paper reports findings of an investigation of the synthesis of monolayer-capped binary gold-silver (AuAg) bimetallic nanoparticles that is aimed at understanding the control factors governing the formation of the bimetallic compositions. The synthesis of alkanethiolate-capped AuAg nanoparticles was carried out using two related synthetic protocols using aqueous sodium borohydride as a reducing agent. One involves a two-phase reduction of AuCl(4)(-), which is dissolved in organic solution, and Ag(+), which is dissolved in aqueous solution. The other protocol involves a two-phase reduction of AuCl(4)(-) and AgBr(2)(-), both of which are dissolved in the same organic solution. AuAg nanoparticles of 2-3 nm core sizes with different compositions in the range of 0-100% Au have been synthesized. The two synthetic routes were compared in terms of bimetallic composition and size properties. Our new findings have allowed us to establish the correlation between synthetic feeding of metals and metal compositions in the bimetallic nanoparticles, which have important implications to the exploration of gold-based bimetallic nanoparticles for constructing sensing and catalytic nanomaterials.