Thin layer chromatography of 57 metal ions on an inorganic ion-exchanger in mixed solvent systems

Summary Thin layers of stannic arsenate have been used to study the chromatographic behaviour of 57 metal ions in different mixed solvents. Au³⁺, Hg²⁺, UO ₂ ²⁺ , Be²⁺ and Al³⁺ and others can be easily separated from numerous metal ions. Fast quaternary, ternary and binary separations have been also achieved. Important separations are discussed. The effect of pH, duration of heating of ionexchanger plates and layer thickness on the R_f values has been studied and discussed. It is shown that Lederer's equation is also obeyed by thin layers of stannic arsenate, if instead of concentration of Na⁺ ion its activity is taken into consideration.     

Three New Acrylic Acid Derivatives from Achillea mellifolium as Potential Inhibitors of Urease from Jack Bean and α-Glucosidase from Saccharomyces cerevisiae

(1) Background: Achillea mellifolium belongs to a highly reputed family of medicinal plants, with plant extract being used as medicine in indigenous system. However, limited data is available regarding the exploitation of the medicinal potential of isolated pure compounds from this family; (2) Methods: A whole plant extract was partitioned into fractions and on the basis of biological activity, an ethyl acetate fraction was selected for isolation of pure compounds. Isolated compounds were characterized using different spectroscopic techniques. The compounds isolated from this study were tested for their medicinal potential using in-vitro enzyme assay, coupled with in-silico studies; (3) Results: Three new acrylic acid derivatives (1–3) have been isolated from the ethyl acetate fraction of Achillea mellifolium. The characterization of these compounds (1–3) was carried out using UV/Vis, FT-IR, 1D and 2D-NMR spectroscopy (¹H-NMR, ¹³C-NMR, HMBC, NOESY) and mass spectrometry. These acrylic acid derivatives were further evaluated for their enzyme inhibition potential against urease from jack bean and α glucosidase from Saccharomyces cerevisiae, using both in-silico and in-vitro approaches. In-vitro studies showed that compound 3 has the highest inhibition against urease enzyme (IC₅₀ =10.46 ± 0.03 μΜ), followed by compound 1 and compound 2 with percent inhibition and IC₅₀ value of 16.87 ± 0.02 c and 13.71 ± 0.07 μΜ, respectively, compared to the standard (thiourea-IC₅₀ = 21.5 ± 0.01 μΜ). The investigated IC₅₀ value of compound 3 against the urease enzyme is two times lower compared to thiourea, suggesting that this compound is twice as active compared to the standard drug. On the other hand, all three compounds (1–3) revealed mild inhibition potential against α-glucosidase. In-silico molecular docking studies, in combination with MD simulations and free energy, calculations were also performed to rationalize their time evolved mode of interaction inside the active pocket. Binding energies were computed using a MMPBSA approach, and the role of individual residues to overall binding of the inhibitors inside the active pockets were also computed; (4) Conclusions: Together, these studies confirm the inhibitory potential of isolated acrylic acid derivatives against both urease and α-glucosidase enzymes; however, their inhibition potential is better for urease enzyme even when compared to the standard.     

Effect of Erosive Agents on Surface Characteristics of Nano-Fluorapatite Ceramic: An In-Vitro Study

Erosive beverages cause dissolution of natural teeth and intra-oral restorations, resulting in surface characteristic changes, particularly roughness and degradation. The purpose of this study was to evaluate the surface roughness and topography of a dental ceramic following immersion in locally available erosive solutions. A total of 160 disc specimens of a nano-fluorapatite type ceramic (12 mm diameter and 2 mm thickness) were fabricated and equally distributed into two groups (n = 80) and then evenly distributed among the following five testing groups (n = 16): lemon juice, citrate buffer solution, 4% acetic acid, soft cola drink, and distilled water which served as a control. The surface roughness (Ra) and topography were evaluated using a profilometer and scanning electron microscope at baseline, 24 h, 96 h, and 168 h respectively. Data were analyzed using ANOVA and Tukey’s multiple comparisons (p ≤ 0.05). Surface changes were observed upon exposure to all acidic beverages except distilled water. Amongst all immersion media, 4% acetic acid produced the most severe surface roughness across all time periods (i.e., baseline, 24 h, 96 h, and 168 h). A statistically significant difference in the surface roughness values between all immersion media and across all four time intervals was observed. Erosive agents had a negative effect on the surface roughness and topography of the tested ceramic. The surface roughness increased with increased storage time intervals.     

MgO(001) barrier based magnetic tunnel junctions and their device applications

Spintronics has received a great attention and significant interest within the past decades,and provided considerable and remarked applications in industry and electronic information etc.In spintronics,the MgO based magnetic tunnel junction(MTJ) is an important research advancement because of its physical properties and excellent performance,such as the high TMR ratio in MgO based MTJs.We present an overview of more than a decade development in MgO based MTJs.The review contains three main sections.(1) Research of several types of MgO based MTJs,including single-crystal MgO barrier based-MTJs,double barrier MTJs,MgO based MTJs with interlayer,novel electrode material MTJs based on MgO,novel barrier based MTJs,novel barrier MTJs based on MgO,and perpendicular MTJs.(2) Some typical physical effects in MgO based MTJs,which include six observed physical effects in MgO based MTJs,namely spin transfer torque(STT) effect,Coulomb blockade magnetoresistance(CBMR) effect,oscillatory magnetoresistance,quantum-well resonance tunneling effect,electric field assisted magnetization switching effect,and spincaloric effect.(3) In the last section,a brief introduction of some important device applications of MgO based MTJs,such as GMR & TMR read heads and magneto-sensitive sensors,both field and current switching MRAM,spin nano oscillators,and spin logic devices,have been provided.     

A calibrated model of local food system of Hawaii: What are the economic implications of the state's food goals and policies?

We develop a fully calibrated positive mathematical programming model for Hawaii's local food systems—which captures the production and the consumer sides of the market. Then we use the model to assess two proposed policies—a general excise tax (GET) exemption on locally produced foods, and an investment in agricultural infrastructure. For the GET exemption case, our results indicate an economic gain of $118 per $100 cost. On the other hand, an investment in 1,200 acres of land injected to support local production may generate an economic gain of up to $357 per $100 annual cost of the investment. However, these estimates should be considered preliminary, and thus viewed with caution. Although the model is used to capture Hawaii's local food systems, we believe that our model is generalizable and can be adopted by other economies to assess their respective food localization policies. Recommendations for Resource Managers

• Local food policies need to be based on quantitative terms instead of mere armchair speculation because often their potential outcomes may vary significantly.

• The current modeling framework demonstrates the potential of using positive mathematical programming (PMP) in capturing the intricacies of local food systems. However, this exploratory exercise should be viewed as preliminary in nature and the ensuing results were taken with caution because many important factors such as labor availability may have been left out.

• Thus, further model refinements are necessary to better capture the complexities of local food systems such as farm heterogeneity, availability of farm labor, water availability, and interisland transportation of farm products in the case of Hawaii.

     

Generation and bleaching of E′-centers induced in a-SiO2 by γ-irradiation

Radiation indicator as well as radiation shielding of extremely high dose have been proposed. Three different types of a-SiO₂ namely, G₁-xerogel, G₂-fused and G₃-natural silica were monitored by EPR before and after γ-irradiation. The E′-center has been used for EPR radiation characterization of a-SiO₂ with assuming that the signal intensity changes with γ-irradiation differently as those of other EPR signals do. Formation and decay of the E′-center are closely related with its precursor, diamagnetic oxygen vacancies. Gamma ray of large dose (500 kGy) creates oxygen vacancies giving up-and-down irradiation effects, which, therefore, might be useful for high dose radiation indicator (G₁) and radiation shielding (G₂ and G₃).     

Two-dimensional tellurium saturable absorber for ultrafast solid-state laser

Two-dimensional(2 D) Te nanosheets were successfully fabricated through the liquid-phase exfoliation(LPE) method. The nonlinear optical properties of 2 D Te nanosheets were studied by the open-aperture Z-scan technique. Furthermore, the continuous wave mode-locked Nd:YVO_4 laser was successfully realized by using 2 D Te as a saturable absorber(SA) for the first time, to the best of our knowledge. Ultrashort pulses as short as 5.8 ps were obtained at 1064.3 nm with an output power of 851 m W. This primary investigation indicates that the 2 D Te SA is a promising photonic device in the fields of ultrafast solid-state lasers.     

Caseinolytic Proteins (Clp) in the Genus Klebsiella: Special Focus on ClpK

Caseinolytic proteins (Clp), which are present in both prokaryotes and eukaryotes, play a major role in cell protein quality control and survival of bacteria in harsh environmental conditions. Recently, a member of this protein family, ClpK was identified in a pathogenic strain of Klebsiella pneumoniae which was responsible for nosocomial infections. ClpK is linked to the thermal stress survival of this pathogen. The genome wide analysis of Clp proteins in Klebsiella spp. indicates that ClpK is present in only 34% of the investigated strains. This suggests that the uptake of the clpk gene is selective and may only be taken up by a pathogen that needs to survive harsh environmental conditions. In silico analyses and molecular dynamic simulations show that ClpK is mainly α-helical and is highly dynamic. ClpK was successfully expressed and purified to homogeneity using affinity and anion exchange chromatography. Biophysical characterization of ClpK showed that it is predominantly alpha-helical, and this is in agreement with in silico analysis of the protein structure. Furthermore, the purified protein is biologically active and hydrolyses ATP in a concentration- dependent manner.     

Surface Functionalization of Magnetite Nanoparticles with Multipotent Antioxidant as Potential Magnetic Nanoantioxidants and Antimicrobial Agents

Functionalized magnetite nanoparticles (Fe₃O₄) were prepared using the coprecipitation method followed by functionalization with a multipotent antioxidant (MPAO). The MPAO was synthesized and analyzed using FTIR and NMR techniques. In this study, the functionalized nanoparticles (IONP@AO) were produced and evaluated using the FTIR, XRD, Raman, HRTEM, FESEM, VSM, and EDX techniques. The average determined particle size of IONP@AO was 10 nanometers. In addition, it demonstrated superparamagnetic properties. The magnitude of saturation magnetization value attained was 45 emu g⁻¹. Virtual screenings of the MPAO’s potential bioactivities and safety profile were performed using PASS analysis and ADMET studies before the synthesis step. For the DPPH test, IONP@AO was found to have a four-fold greater ability to scavenge free radicals than unfunctional IONP. The antimicrobial properties of IONP@AO were also demonstrated against a variety of bacteria and fungi. The interaction of developed nanoantioxiants with biomolecules makes it a broad-spectrum candidate in biomedicine and nanomedicine.