New 5-bromo-2-hydroxybenzaldehyde S-ethylisothiosemicarbazone and its mixed-ligand Cu(II) complex with imidazole: synthesis, characterization and DFT calculation

A new Schiff base ligand of 5-bromo-2-hydroxybenzaldehyde S-ethyl-isothiosemicarbazone (H₂L) was synthesized and its mixed-ligand Cu(II) complex was also prepared by reaction of Cu(NO₃)₂·3H₂O with H₂L and imidazole. Their structures were fully characterized by elemental analysis, FT-IR, molar conductivity and UV-Vis methods. The analytical data suggest that the metal, H₂L and imidazole ratios in the Schiff base complex are 1:1:1. Single crystal diffraction was also used to better understand the molecular structure of the Cu(II) complex. The results of physico-chemical analyses of the Schiff base complex reveal the coordination geometry around the central atom is square planar. The H₂L ligand (NNO donor) is coordinated to the metal center as a tridentate bionegatively agent. Another position of the square planar geometry is occupied by the imidazole ligand. Furthermore, computational studies of the new complex were performed by carrying out DFT calculations. Geometry optimization and natural band analysis of the complex is discussed in further detail.      

Speciation Analysis of Cr(III) and Cr(VI) after Solid Phase Extraction Using Modified Magnetite Nanoparticles

A new solid phase extraction (SPE) method has been developed for the speciation of Cr(III) and Cr(VI). This method is based on the adsorption of Cr(VI) on modified alumina‐coated magnetite nanoparticles (ACMNPs). Total chromium in different samples was determined as Cr(VI) after oxidation of Cr(III) to Cr(VI) using H₂O₂. The chromium concentration has been determined by flame atomic absorption spectrometric (FAAS) technique and amount of Cr(III) was calculated by substracting the concentration of Cr(VI) from total chromium concentration. The effect of parameters such as pH, amount of adsorbent, contact time, sample volume, eluent type, H₂O₂ concentration and cetyltrimethylammonium bromide (CTAB) concentration as modifier on the quantitative recovery of Cr(VI) were investigated. Under the optimal experimental conditions, the preconcentration factor, detection limit, linear range and relative standard deviation (RSD) of Cr(VI) were 140 (for 350 mL of sample solution), 0.083 ng mL^?1, 0.1‐10.0 ng mL^?1 and 4.6% (for 5.0 ng mL^?1, n = 7), respectively. This method avoided the time‐consuming column‐passing process of loading large volume samples in traditional SPE through the rapid isolation of CTAB@ACMNPs with an adscititious magnet. The proposed method was successfully applied to the determination and speciation of chromium in different water and wastewater samples and suitable recoveries were obtained.     

Doped Nano‐Sized Copper(I) Oxide (Cu2O) on Melamine?Formaldehyde Resin: a Highly Efficient Heterogeneous Nano Catalyst for ‘Click’ Synthesis of Some Novel 1H‐1,2,3‐Triazole Derivatives Having Antibacterial Activity

A facile and simple protocol for the 1,3‐dipolar cycloaddition of organic azides with terminal alkynes catalyzed by doped nano‐sized Cu₂O on melamine? formaldehyde resin (nano‐Cu₂O? MFR) as a new and convenient heterogeneous catalyst is described. In this method, ‘click’ cycloaddition of various structurally diverse β‐azido alcohols and alkynes in the presence of nano‐Cu₂O? MFR in H₂O/THF 1 : 2 furnished the corresponding 1,4‐disubstituted 1H‐1,2,3‐triazole adducts 1a – 1o in good to excellent yields at room temperature (Scheme and Table 3). The nano‐Cu₂O? MFR was characterized by scanning electron microscopy (SEM), X‐ray diffraction (XRD), inductively coupled plasma (ICP) analysis, and FT‐IR. The nano‐Cu₂O? MFR could be easily recovered and recycled from the reaction mixture and reused for many consecutive trials without significant decrease in activity (Table 4). The in vitro antibacterial activities of all synthesized compounds were tested on several Gram‐positive and/or Gram‐negative bacteria (Table 5). The results demonstrate the promising antibacterial activity for some of the synthesized compounds.     

Aromatization of Hantzsch 1,4-Dihydropyridines with Al(NO3)3·9H2O and/or Fe(NO3)3·9H2O in the Presence of Silica Sulfuric Acid Under Mild and Heterogeneous Conditions

A simple and convenient method for the aromatization of Hantzsch 1,4-dihydropyridines to the corresponding pyridines is achieved via combination of aluminum or ferric nitrates and silica sulfuric acid as environmentally friendly and novel oxidizing media. This oxidation was carried out in dichloromethane under heterogeneous conditions with good to excellent yields.     

Synthesis of 2‐Aryl‐5‐oxo‐4‐[2‐(phenylmethylidene)hydrazino]‐2,5‐dihydro‐1H‐pyrrole‐3‐carboxylates by the Reaction between Hydrazones,Acetylenedicarboxylates, and 1‐Aryl‐N,N′‐bis(arylmethylidene)methanediamines

An efficient approach for the preparation of functionalized 2‐aryl‐2,5‐dihydro‐5‐oxo‐4‐[2‐(phenylmethylidene)hydrazino]‐1H‐pyrroles is described. The four‐component reaction between aldehydes, NH₂NH₂?H₂O, dialkyl acetylenedicarboxylates, and 1‐aryl‐N,N′‐bis(arylmethylidene)methanediamines proceeds in EtOH under reflux in good‐to‐excellent yields (Scheme 1). The structures of 4 were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS, and, in the case of 4f , by X‐ray crystallography). A plausible mechanism for this type of reaction is proposed (Scheme 2).     

Selective Oxidative Cleavage of Benzylic Carbon-Nitrogen Double Bonds Under Non-Aqueous Condition with Tetrakis(pyridine)-Silver Dichromate [(Py)2Ag]2 Cr2O7

Carbonyl derivatives of phenylhydrazine, 2-nitrophenylhydrazine, 2, 4-dinitrophenazine, semicarbozone, and hydroxylamine are converted to their corresponding carbonyl compounds with tetrakis(pyridine)silver dichromate in benzene. Selectivity is also observed for benzylic C = N cleavage.     

Diammonium Hydrogen Phosphate: An Efficient and Versatile Catalyst for the One‐Pot Synthesis of Tetrahydrobenzo[b]pyran Derivatives in Aqueous Media

Diammonium hydrogen phosphate was used as a mild, efficient, neutral, and cheap catalyst for the synthesis of various 4H‐benzo[b]pyran derivatives via a one‐pot, three‐component condensation of aromatic aldehydes, active methylene compounds, and dimedone in aqueous media.     

Pressure Drop and Performance Characteristics of Water-Based Al2O3 and CuO Nanofluids in a Triangular Duct

An experimental study is performed to determine the pressure drop and performance characteristics of Al₂O₃/water and CuO/water nanofluids in a triangular duct under constant heat flux where the flow is laminar. The effects of adding nanoparticles to the base fluid on the pressure drop and friction factor are investigated at different Reynolds numbers. The results show that at a specified Reynolds number, using the nanofluids can lead to an increase in the pressure drop by 35%. It is also found that with increases in the Reynolds number, the rate of increase in the friction factor with the volume fraction of nanoparticles is reduced. Finally, the performance characteristics of the two nanofluids are investigated using the data of pressure drop and convective heat transfer coefficient. The results show that the use of Al₂O₃/water nanofluid with volume fractions of 1.5% and 2% is not helpful in the triangular duct. It is also concluded that at the same volume fraction of nanoparticles, using Al₂O₃ nanoparticles is more beneficial than CuO nanoparticles based on the performance index.     

Micellar Enhanced Ultrafiltration of Reactive Black 5 from Aqueous Solution by Cationic Surfactants

Reactive black 5 (RB-5) dye was removed from a water stream using two cationic surfactants, cetyltrimethylammonium bromide (CTAB) and cetylpyridinium chloride (CPC), via micellar enhanced ultrafiltration. Three membranes with different pore size were used for the determination of rejection coefficient and permeate flux of the solution at 1.5 bar trans-membrane pressure (TMP). The two surfactants (CPC and CTAB) played an almost negligible role in rejection efficiency with 5000 and 10,000 molecular weight cut-off membrane (MWCO), respectively. In this case, high rejection and low permeate flux was the result of a larger molecular size of RB-5 DYE being retained by comparatively smaller sized pores of membrane via ultrafiltration. However, CPC and CTAB surfactants showed 83% and 98% rejection coefficient, respectively, at a concentration greater than their CMC values against 30,000 MWCO. Permeate flux remained low and constant in presence of 5000 and 10,000 MWCO with a small variation against 30,000 MWCO for the two surfactants, thereby no appreciable effect on both surfactant concentrations on concentration polarization was estimated. Thus, RB-5 dye alone was determined to be responsible for membrane plugging or concentration polarization and ultimately for low permeate flux. The effect of trans-membrane pressure was also investigated during this study.