Easy deposition of Ag onto polystyrene beads for developing surface-enhanced-Raman-scattering-based molecular sensors

We describe a very simple electroless plating method that can be used to prepare Ag-coated polystyrene beads. Robust Ag nanostructures are reproducibly fabricated by soaking polystyrene beads in ethanolic solutions of AgNO(3) and butylamine. When the molar ratio of butylamine to AgNO(3) is far below 1.0, distinct nanosized Ag particles are formed on the polystyrene beads, but by increasing the amount of butylamine, network-like Ag nanostructures are formed that possess very broad UV/vis absorption characteristics extending from the near-UV to near-infrared regions. In conformity with the UV/vis absorption characteristics, the Ag-deposited polystyrene beads were highly efficient surface-enhanced Raman scattering (SERS) substrates, with an enhancement factor estimated using 4-aminobenzenethiol (4-ABT) as a model adsorbate to be larger than 1.1x10(6). On the basis of the nature of the SERS peaks of 4-ABT, those Ag-deposited polystyrene beads were confirmed, after attaching biotin groups over 4-ABT, to selectively recognize streptavidin molecules down to concentrations of 10(-11) g mL(-1) (i.e., approximately 0.2 pM). Since a number of different molecules can be used as SERS-marker molecules (such as 4-ABT), multiple bioassays are readily accomplished via SERS after attaching appropriate host or guest molecules onto them.     

偶氮材料——乙基橙的光致双折射特性

将偶氮化合物乙基橙样品置于一对正交的偏振片之间，用一束激发光照射该样品，分别测量 在激发光的不同强度和不同偏振方向下探测光的透射功率，研究样品的双折射特性.实验表 明，透射光的饱和值和稳定值与激发光强成正比，且与激发光偏振方向有关，探测光与激发 光振动方向的夹角(θ)为45°时，其值最大；若θ不太小（>10°），sin²2θ 与透射光的饱和值、稳定值成线性关系.同时，利用巴俾涅补偿器对样品的双折射率差进 行了测量，分别得到了绿光激发前后的准确数值为1.11×10^-3和3.57×10 ^-3. 关键词： 偶氮 双折射 测量     

两亲性壳聚糖基聚合物碳点的合成及其在载药方面的应用

通过水热法合成了系列具有高荧光量子产率（42.9%）辛基化壳聚糖基两亲性聚合物碳点荧光材料。利用红外光谱、紫外吸收光谱、光电子能谱、透射电镜、X射线衍射及荧光光谱对聚合物碳点进行了表征。以阿霉素为模型药物,研究了聚合物碳点对阿霉素的载药性能。当辛基取代度为76.42%时,其最大载药量和包封率分别为49.6%与47.4%。在磷酸盐缓冲液中,载药纳米胶束呈前期快速释放,后期缓慢释放的双相特征。将载药纳米胶束与鼻咽癌细胞作用,发现其存活率随着载药纳米胶束加入量的增加而降低,说明该纳米胶束对鼻咽癌细胞有一定的抑制作用。总之,该聚合物碳点材料在药物载体与荧光示踪方面有潜在的应用价值。     

一种多功能信号源系统设计

针对单一信号源无法满足测试需求的现状,提出了一种新型多功能信号源系统设计方案;详细阐述了信号源系统的硬件及软件设计,方案基于标准化、高速、可靠性三方面的考虑,硬件环境基于Compact PCI工控计算机,设计了3U CPCI结构的信号源板卡,配套软件采取模块化设计;该方案可实现多类型、多通道的高精度、高可靠性信号的独立输出和同时输出;实验结果表明,该多功能信号源系统稳定性好、可靠性高、使用便捷,满足设计需求。     

Mechanochemical Dimerization of Aldoximes to Furoxans

Solvent-free mechanical milling is a new, environmentally friendly and cost-effective technology that is now widely used in the field of organic synthesis. The mechanochemical solvent-free synthesis of furoxans from aldoximes was achieved through dimerization of the in situ generated nitrile oxides in the presence of sodium chloride, Oxone and a base. A variety of furoxans was obtained with up to a 92% yield. The present protocol has the advantages of high reaction efficiency and mild reaction conditions.     

Towards Dynamic Control of Wettability by Using Functionalized Altitudinal Molecular Motors on Solid Surfaces

We report the synthesis of altitudinal molecular motors that contain functional groups in their rotor part. In an approach to achieve dynamic control over the properties of solid surfaces, a hydrophobic perfluorobutyl chain and a relatively hydrophilic cyano group were introduced to the rotor part of the motors. Molecular motors were attached to quartz surfaces by using interfacial 1,3‐dipolar cycloadditions. To test the effect of the functional groups on the rotary motion, photochemical and thermal isomerization studies of the motors were performed both in solution and when attached to the surface. We found that the substituents have no significant effect on the thermal and photochemical processes, and the functionalized motors preserved their rotary function both in solution and on a quartz surface. Preliminary results on the influence of the functional groups on surface wettability are also described.     

Impact of an indium oxide/indium-tin oxide mixed structure for GaN-based light-emitting diodes

An interesting GaN-based light emitting diode (LED) using a 50 nm indium oxide (In₂O₃)/250 nm indium-tin oxide (ITO) mixed structure to replace the commonly used ITO (250 nm) current spreading layer is fabricated and studied. Use of the In₂O₃ layer could reduce the contact resistance of p-GaN in LEDs. In addition, this highly-resistive In₂O₃ layer, below the ITO layer could improve the current spreading performance. Experimentally, at room temperature, using this mixed structure, the luminous and EL intensities are enhanced by 17.7 and 17.1%, respectively.     

Inducing anisotropy in bulk Nd-Fe-Co-Al-B nanocrystalline alloys by quenching in magnetic field

We have observed magnetic anisotropy in bulk Nd_55−xCo_xFe₃₀Al₁₀B₅ (x=10, 15 and 20) alloys prepared by copper mold suction casting method with a presence of external magnetic field (quenching field) μ₀H=0.25 T. By changing direction of the measuring field from perpendicular to parallel one in comparison with that of the quenching field, coercive force of the alloys slightly decreases while remanent magnetization and squareness of hysteresis loop increase more clearly. It is also found that the higher Co-concentration in the alloys the larger magnetic anisotropy is induced. The structure analyses manifest nanocrystalline particles embedded in residual amorphous matrix of the alloys. The size of the particles is in range of 10-30 nm and their crystalline phases consist of Nd₂(Fe,Co)₁₄B, Nd₃Co, Nd₃Al, NdAl₂ and Nd.     

Accelerated Curing Speed of Ethyl α‐Cyanoacrylate by Polymer with Catecholamine Groups

Four kinds of poly(ethylene glycol) (PEG) derivatives with the similar backbone and different side groups have been synthesized successfully. When both catecholamine and double bond are tethered to polymer backbone, i.e., the PEG backbone, simultaneously, the polymer can accelerate the curing speed of ethyl α‐cyanoacrylate (commercially available as 502) greatly under the same conditions (the curing time of such system is no more than 5 s). Probably this is due to the autoxidation of catecholamines. Through the redox‐cycling, catecholamines can produce, collect free radicals, and thus initiate the free radical polymerization. Due to the fast‐curing of such material when mixed with α‐cyanoacrylate, we could design and develop a new bicomponent super bioglue used in the dentistry or other bioenvironment requiring super fast settlement for further surgical operations.