Geometric constraints at the surfactant headgroup: effect on lipase activity in cationic reverse micelles

The primary objective of the present article is to understand how the geometric constraints at the surfactant head affect the lipase activity in the reverse micellar interface. To resolve this issue, surfactants were designed and synthesized, and activity was measured in /water/isooctane/n-hexanol reverse micellar systems at z ([alcohol]/[surfactant])=5.6, pH 6.0 (20 mM phosphate), 25 degrees C across a varying range of W0 ([water]/[surfactant]) using p-nitrophenylalkanoates as the substrate. It was observed that lipase activity increases from surfactants to with the increment in surface area per molecule (Amin) because of the substitution by the bulky tert-butyl group at the polar head. However, the activity was found to be similar for despite an enhancement in the hydrophilic moieties at the interface. This unchanged lipase activity is presumably due to the comparable surface area of to originating from the rigidity at the surfactant head. Noticeably, the enzyme activity improved from with the simultaneous increment of both the hydroxyl group and the flexibility of the headgroup whereas that for increased exclusively with the flexibility of the headgroup. The common parameter in both groups of surfactants and is the flexibility of the headgroup, which possibly enhance Amin and consequently the lipase activity. Thus, the geometric constraints at the surfactant headgroup play a crucial role in modulating the lipase activity profile probably because of the variation in interfacial area.     

Computational elimination of interelemental interference in the analysis of copper, cobalt and nickel in polymetallic sea bed nodules by flame atomic absorption spectrometry

A method has been described for the estimation of Cu, Co and Ni in polymetallic sea bed nodule samples by flame atomic absorption spectrometry using single component calibration standards. Interelemental interference plays a crucial role in the estimation of Cu, Co and Ni by flame AAS. Calibration by multicomponent matrix matching standards often fails because of wide variations in the compositions of actual samples. Cu, Co and Ni values are depressed in the presence of appreciable amounts of Fe and Mn present in the sea nodule matrix. Observed interferences have been eliminated computationally using a two parameter theoretical model. The method has been successfully applied for the estimation of Cu, Co and Ni in real life sea nodule samples by flame AAS using single component calibration standards.     

Unprecedented chemical transformation of semicarbazones mediated by Wilkinson's catalyst

para-Nitrobenzaldehyde semicarbazone undergoes an unusual chemical transformation upon reaction with [Rh(PPh(3))(3)Cl] in the presence of trialkyl and dialkylamines (NR(2)R'; R = Et,(i)Pr, (n)Bu; R' = H or R' = R) via dissociation of the C-NH(2) bond and formation of a new C-NR(2) bond (where the NR(2) fragment is provided by the amine). The transformed semicarbazone ligand binds to rhodium as a dianionic C,N,O-donor to afford complexes of type [Rh(PPh(3))(2)(CNO-NR(2))Cl] (CNO-NR(2) = the coordinated semicarbazone ligand). Another group of semicarbazones (viz. salicylaldehyde semicarbazone, 2-hydroxyacetophenone semicarbazone, and 2-hydroxynaphthaldehyde semicarbazone) has also been observed to undergo a similar chemical transformation upon reaction with [Rh(PPh(3))(3)Cl] under similar experimental conditions as before, and these transformed semicarbazones bind to rhodium as dianionic O,N,O-donors affording complexes of the type [Rh(PPh(3))(2)(ONO(n)-NR(2))Cl] (ONO(n)-NR(2) = the coordinated semicarbazone ligand; n = 1-3). The structure of the [Rh(PPh(3))(2)(CNO-NEt(2))Cl] and [Rh(PPh(3))(2)(ONO(2)-NR(2))Cl] complexes has been determined. All the complexes show characteristic (1)H NMR signals. They also show intense absorptions in the visible and ultraviolet region. Cyclic voltammetry on the complexes shows an oxidative response within 0.52-0.97 V versus SCE and a reductive response within -1.00 to -1.27 V versus SCE, where both the responses are believed to be centered on the semicarbazone ligand.     

Three-dimensional quantitative structure-property relationship (3D-QSPR) models for prediction of thermodynamic properties of polychlorinated biphenyls (PCBs): enthalpy of vaporization

Three-dimensional Quantitative Structure-Property Relationship (QSPR) models have been derived using Comparative Molecular Field Analysis (CoMFA) to correlate the vaporization enthalpies of a representative set of polychlorinated biphenyls (PCBs) at 298.15 K with their CoMFA-calculated physicochemical properties. Various alignment schemes, such as inertial, as is, and atom fit, were employed in this study. The CoMFA models were also developed using different partial charge formalisms, namely, electrostatic potential (ESP) charges and Gasteiger-Marsili (GM) charges. The most predictive model for vaporization enthalpy (Delta(vap)H(m)(298.15 K)), with atom fit alignment and Gasteiger-Marsili charges, yielded r2 values 0.852 (cross-validated) and 0.996 (conventional). The vaporization enthalpies of PCBs increased with the number of chlorine atoms and were found to be larger for the meta- and para-substituted isomers. This model was used to predict Delta(vap)H(m)(298.15 K) of the entire set of 209 PCB congeners.     

Curcumin,a natural colorant as initiator for photopolymerization of styrene: kinetics and mechanism

The photopolymerization of styrene in presence of an efficient, eco-friendly, and a cost-effective photoinitiator, curcumin, which is found in turmeric root, has been reported for the first time. The catalytic concentration (10⁻⁶ M) of curcumin is effective to photoinitiate the polymerization of styrene. The kinetic data, inhibiting effect of benzoquinone and electron spin resonance studies, indicate that the polymerization proceeds via a free radical mechanism. The system follows non-ideal kinetics (R _p ∝ [Cur]^0.36 [Sty]^1.04) due to both primary radical termination and degradative chain transfer reactions. The broad peaks due to methine and methylene protons in ¹H-NMR (nuclear magnetic resonance [NMR]) spectrum and a band of resonances at 145–146 ppm in ¹³C-NMR indicate atactic nature of the polystyrene formed. The maximum conversion at 30 ± 0.2 °C in 17 h has been limited to 23% without gelation. The formation of radicals and mechanism of polymerization are also discussed.     

Molecular dynamics for very large systems on massively parallel computers: The MPSim program

We describe the implementation of the cell multipole method (CMM) in a complete molecular dynamics (MD) simulation program (MPSim) for massively parallel supercomputers. Tests are made of how the program scales with size (linearly) and with number of CPUs (nearly linearly) in applications involving up to 10⁷ particles and up to 500 CPUs. Applications include estimating the surface tension of Ar and calculating the structure of rhinovirus 14 without requiring icosahedral symmetry. © 1997 by John Wiley & Sons, Inc.     

Understanding the Influence of Donor-Acceptor Diazo Compounds on the Catalyst Efficiency of B(C6F5)3 Towards Carbene Formation

Diazo compounds have been largely used as carbene precursors for carbene transfer reactions in a variety of functionalization reactions. However, the ease of carbene generation from the corresponding diazo compounds depends upon the electron donating/withdrawing substituents either side of the diazo functionality. These groups strongly impact the ease of N₂ release. Recently, tris(pentafluorophenyl)borane [B(C₆F₅)₃] has been shown to be an alternative transition metal-free catalyst for carbene transfer reactions. Herein, a density functional theory (DFT) study on the generation of carbene species from α-aryl α-diazocarbonyl compounds using catalytic amounts of B(C₆F₅)₃ is reported. The significant finding is that the efficiency of the catalyst depends directly on the nature of the substituents on both the aryl ring and the carbonyl group of the substrate. In some cases, the boron catalyst has negligible effect on the ease of the carbene formation, while in other cases there is a dramatic reduction in the activation energy of the reaction. This direct dependence is not commonly observed in catalysis and this finding opens the way for intelligent design of this and other similar catalytic reactions.     

Multilayer chitosan-based open tubular capillary anion exchange column with integrated monolithic capillary suppressor

We describe a multilayered open tubular anion exchange column fabricated by alternately pumping solutions of chitosan and glutaraldehyde. The column is terminated in an integrally bonded monolithic suppressor cast around a mandrel of a tungsten wire, composed of an acrylic acid (AA)-ethylene dimethacrylate (EDMA) monolith that is made with sufficient porogen for the monolith to function as a membrane. For a 4.5m long 75 μm bore column coated with 24 successive layers of the condensation polymer (estimated to contain ~72 molecular layers) and coupled to 1cm length of a suppressor fabricated with 55-60% AA, effective separation of several common anions (F(-), Cl(-), NO(2)(-), Br(-), NO(3)(-), average number of theoretical plates ~12,000) and adequate suppression of 1 mM KOH used as eluent was observed at a flow rate of 800 nL min(-1) to obtain sub-picomol detection limits at an operating pressure of ~1 bar. The separation is not time efficient but the system can be meritorious in unique niche applications where a small form factor is desired and liquid volume and power consumption are more important than separation speed.     

Central limit theorems for a class of irreducible multicolor urn models

We take a unified approach to central limit theorems for a class of irreducible multicolor urn models with constant replacement matrix. Depending on the eigenvalue, we consider appropriate linear combinations of the number of balls of different colors. Then under appropriate norming the multivariate distribution of the weak limits of these linear combinations is obtained and independence and dependence issues are investigated. Our approach consists of looking at the problem from the viewpoint of recursive equations.