Determination of critical micelle concentration by hyper-rayleigh scattering

The critical micelle concentration (CMC) of several surfactants that contain an NLO chromophore, either at the hydrocarbon tail, or at the hydrophilic headgroup, or even as a counterion, was determined by hyper-Rayleigh scattering (HRS). In all cases, the HRS signal exhibited a similar variation with surfactant concentration, wherein the CMC is inferred from a rather unprecedented drop in the signal intensity. This drop is attributed to the formation of small pre-micellar aggregates, whose concentrations become negligible above CMC. In addition, a probe molecule, which upon protonation yielded a species with significantly enhanced HRS intensity, was developed and its utility for the determination of the CMC of simple fatty acids was demonstrated.     

Structure and mechanism of action of isopentenylpyrophosphate-dimethylallylpyrophosphate isomerase

We have obtained the three-dimensional X-ray crystallographic structure of a C67A mutant Escherichia coli isopentenylpyrophosphate-dimethylallylpyrophosphate isomerase (EC 5.3.3.2) complexed with the bromohydrin of isopentenylpyrophosphate, at 1.93 A resolution. The overall backbone fold is very similar to that obtained previously for the wild-type enzyme in the presence of a divalent metal cation (Mn2+ or Mg2+). However, in the new structure, there are two metal binding sites, not just one. The first metal binding site is occupied by Mn2+, coordinated to three histidine and two glutamate residues, while the second is occupied by Mg2+, coordinated to two bromohydrin-ligand phosphate oxygens, the carbonyl oxygen of A67, a carboxyl oxygen of E87, and two water molecules. The C3 hydroxyl group of the bromohydrin inhibitor is involved in a short hydrogen bond to the carboxyl group of E116, one of the two Mn-bound glutamates. The structure obtained is consistent with a mechanism of action of the enzyme in which the carboxyl group of E116 protonates the double bond in isopentenylpyrophosphate, forming a carbocation, followed by removal of a C2 proton by the thiolate of C67, in the wild-type enzyme. The inhibition of the enzyme by a wide variety of other potent inhibitors is also readily explained on the basis of the bromohydrin inhibitor structure.     

Convenient route to enantiopure aryl cyclopentanes via Diels-Alder reaction of asymmetric dienes. Total synthesis of (+)-herbertene and (+)-cuparene

A general route for the synthesis of highly substituted aryl cyclopentanes has been developed involving Diels-Alder reaction of asymmetric dienes prepared from (+)-camphoric acid followed by aromatization of the resulting cyclohexene derivatives. Employing this protocol enantiospecific synthesis of (+)-herbertene and (+)-cuparene has been accomplished.     

Modeling of a control induced system for product formation in enzyme kinetics

Double substrate enzyme kinetics has a leading role for product quantification and optimization in different chemical and biochemical sectors. Mathematical approach for controlling these reactions in different stages by suitable parameters adds a new dimension in this interdisciplinary field of research. Applying control theoretic approach in the reversible backward stages of double substrate enzymatic model, time economization with regard to product formation is significant. In this article, we formulate a double substrate mathematical model of enzymatic dynamical reaction system with control measures with a view to observe the effect of changes of these measures with respect to the concentration of substrates, enzyme, complexes and finally product. Here, Pontryagin Minimum Principle is used for observing the effect of control measures in the system dynamics with the help of Hamiltonian. We compare the relevant numerical solutions for the substrates, enzyme, complexes and product concentration profile for a specified time interval with respect to control factors.     

Marginal states in a cubic autocatalytic reaction

Marginal steady state belongs to a special class of states in nonlinear dynamics. To realize this state we consider a cubic autocatalytic reaction A + 2B → 3B in a continuous-stirred-tank-reactor, where the flow rate of the reactant A can be controlled to manipulate the dynamical behavior of the open system. We demonstrate that when the flow rate is weakly noisy the autocatalytic reaction admits of a steady state which is marginal in nature and is surrounded by infinite number of periodic trajectories. When the uncatalyzed reaction A → B is included in the reaction scheme, there exists a marginal steady state which is a critical state corresponding to the point of transition between the flow branch and the equilibrium branch, similar to gas-liquid critical point of transition. This state loses its stability in the weak noise limit.     

Amplitude equations for breathing spiral waves in a forced reaction-diffusion system

Based on a multiple scale analysis of a forced reaction-diffusion system leading to amplitude equations, we explain the existence of spiral wave and its photo-induced spatiotemporal behavior in chlorine dioxide-iodine-malonic acid system. When the photo-illumination intensity is modulated, breathing of spiral is observed in which the period of breathing is identical to the period of forcing. We have also derived the condition for breakup and suppression of spiral wave by periodic illumination. The numerical simulations agree well with our analytical treatment.     

Electrocatalytic treatment of waste: studies on discoloration of an industrial azo dye effluent

A textile dye effluent containing chiefly reactive azo dyes has been treated electrochemically for discoloration and COD (chemical oxygen demand) reduction at different current densities, flow rates and dilution. Experiments have been carried out in a thin electrochemical reactor under single pass conditions using a dimensionally stable catalytic anode (DSA) and a stainless steel cathode.     

Oxovanadium(IV) and -(V) complexes of dithiocarbazate-based tridentate Schiff base ligands: syntheses,structure, and photochemical reactivity of compounds involving imidazole derivatives as coligands

The tridentate dithiocarbazate-based Schiff base ligands H(2)L (S-methyl-3-((5-R-2-hydroxyphenyl)methyl)dithiocarbazate, R = NO(2), L = L(2); R = Br, L = L(3)) react with [VO(acac)(2)] in the presence of imidazole derivatives as coligands to form oxovanadium(IV) and cis-dioxovanadium(V) complexes. With benzimidazole and N-methylimidazole, the products are oxovanadium(IV) complexes, viz. [VOL(3)(BzIm)].0.5CH(3)CN (1a) and [VOL(N-MeIm)(2)] (L = L(3), 1b; L = L(2), 1c), respectively. In both 1a,b, the O and S donor atoms of the tridentate ligand are cis to the terminal oxo group (in the "equatorial" plane) and mutually trans, but the N donor atom is respectively cis and trans to the oxo atom, as revealed from X-ray crystallography. When imidazole or 4-methylimidazole is used as the ancillary ligand, the products obtained are water-soluble cis-dioxovanadium(V) complexes [VO(2)L(R'-ImH)] (L = L(3) and L(2), R' = H and Me, 2a-d). These compounds have zigzag chain structures in the solid state as confirmed by X-ray crystallographic investigations of 2a,d, involving an alternating array of LVO(2)(-) species and the imidazolium counterions held together by Coulombic interactions and strong hydrogen bonding. Complexes 2a-d are stable in water or methanol. In aprotic solvents, viz. CH(3)CN, DMF, or DMSO, however, they undergo photochemical transformation when exposed to visible light. The putative product is a mixed-oxidation divanadium(IV/V) species obtained by photoinduced reduction as established by EPR, electronic spectroscopy, and dynamic (1)H NMR experiments.     

First Bis(σ)-borane Complexes of Group 6 Transition Metals: Experimental and Theoretical Studies

A series of bis(σ)-borane complexes of Group 6 transition metals were prepared by direct dihydroborane coordination to the metal center. Reaction of [M(CO)₃(PCy₃)₂] and two dihydroboranes [DurBH₂] and [(Me₃Si)₂NBH₂] (Dur=2,3,5,6-Me₄C₆H) yielded bis(σ)-borane complexes fac-[M(CO)₃(PCy₃){η²-(H₂BR)}] (R=Dur; 1 : M=Cr, 2 : M=W; R=N(SiMe₃)₂; 3 : M=Cr, 4 : M=W). In the case of molybdenum, we have isolated an arene complex ( 5 ) with [DurBH₂] in which the Dur group acts as a η⁶-bound ligand, and with [(Me₃Si)₂NBH₂] a similar bis(σ)-borane complex was isolated, cis,trans-[Mo(CO)₂(PCy₃)₂{η²-(H₂BN(SiMe₃)₂}] ( 6 ), with a different pattern of auxiliary ligands. The complexes were investigated by multinuclear NMR spectroscopy, mass spectrometry, X-ray diffraction analysis, and computational methods. Quantum theory of atoms in molecules (QTAIM) calculations demonstrated that the borane complexes may be described as pure bis(σ)-borane complexes rather than elongated or stretched examples given that the calculations do not show the presence of a ring-critical point (RCP) at the ring formed by the interactions of the B−H with metal center.