Concentration effect of Tm on cathodoluminescence properties of SiO2:Tm and SiO2:Ho,Tm systems

Cathodoluminescence (CL) properties of SiO₂ powders activated with thulium (Tm³⁺) and holmium (Ho³⁺) ions prepared by a sol–gel process were investigated. Different molar concentrations of Tm³⁺ co-doped with Ho³⁺ were studied. The 460 nm peak was monitored and the influence of the beam energy and concentration of Tm³⁺ ions on the emission properties of this peak was also monitored. The peculiar behavior whereby the 460 nm emission peak decreases and the increase in the 705 and 865 nm peaks with the increase in the concentration of Tm³⁺ ions is reported. The relationship between the accelerating beam voltage and the CL intensity of the blue emission peak (460 nm peak) is established. Morphology, particle size and optical properties were characterized with Scanning electron microscopy (SEM), UV/VIS Lambda 750 S spectrometer and Auger electron spectroscopy (AES) equipped with Ocean Optics S2000, respectively.     

Spectral and surface investigations of Ca2V2O7:Eu3+ nanophosphors prepared by citrate-gel combustion method: a potential red-emitting phosphor for near-UV light-emitting diodes

In the present work, red-emitting Ca₂V₂O₇:xEu³⁺ (x = 0.5–6.0 mol%) nanophosphors, in the form of powders, were synthesized by the citrate-gel combustion method using metal nitrates as precursors and citric acid as fuel. X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy, photoluminescence (PL) and cathodoluminescence (CL) spectroscopy were used to study the structure, morphology and spectral properties of the samples. The chemical compositions and electronic states of the powders were analyzed with X-ray photoelectron spectroscopy. The average crystallite sizes estimated using the XRD data were found to be in the range of 30–45 nm, and were cross verified by TEM. The lattice parameters determined by the POWD program were approximated as a = 7.242 Å, b = 6.674 Å, c = 6.932 Å and V = 291.24 Å³, respectively. Under UV (395 nm) (PL) and electron (CL) excitation, the nanophosphors show characteristic emission from the Eu³⁺ ion (⁵D₀ → ⁷F_j, j = 1–5) with the main peaks at 612 and 616 nm. The maximum emission intensity was recorded from the sample with an Eu³⁺ concentration of 4 mol% and a critical energy distance of 19.084 Å between the donor and the acceptor. Above this concentration, there was a reduction in the intensity due to dipole–dipole induced concentration quenching effects. The potential applications of this phosphor as a high color-purity phosphor in light-emitting diodes are evaluated.     

Temperature-dependence of the structural and afterglow luminance properties of polymer/SrAlxOy:Eu,Dy composites

Although aluminate phosphors have attracted great interest for applications in lamps, cathode ray tubes and plasma display panels, there still remain issues affecting operational parameters such as luminescence efficiency, stability against temperature, high color purity and perfect decay time. In addition, issues involving important aspects of the monoclinic↔hexagonal phase transition temperature still exist. In this work, SrAl_xO_y:Eu²⁺,Dy³⁺ phosphor powders were prepared by the sol–gel method. X-ray diffraction (XRD) has shown that both crystallinity and crystallite sizes increased as the temperature increased. Both SrAl₂O₄ and Sr₂Al₃O₆ phases were observed. Photoluminescence (PL) characterization shows temperature-dependence, which indicates emission at low and high annealing temperatures originating from Eu²⁺ and Eu³⁺ ions. Thermoluminescence glow and decay measurements provided useful insight on the influence of traps on luminescence behavior. Differential scanning calorimetry (DSC) and thermogravimetric studies (TGA) on composites of the phosphor in low density polyethylene (LDPE) demonstrated the varied influence of annealing temperature on some luminescence and thermal properties.     

Numerical Analysis of the Rebellious Voter Model

The rebellious voter model, introduced by Sturm and Swart (2008), is a variation of the standard, one-dimensional voter model, in which types that are locally in the minority have an advantage. It is related, both through duality and through the evolution of its interfaces, to a system of branching annihilating random walks that is believed to belong to the ‘parity-conservation’ universality class. This paper presents numerical data for the rebellious voter model and for a closely related one-sided version of the model. Both models appear to exhibit a phase transition between noncoexistence and coexistence as the advantage for minority types is increased. For the one-sided model (but not for the original, two-sided rebellious voter model), it appears that the critical point is exactly a half and two important functions of the process are given by simple, explicit formulas, a fact for which we have no explanation.     

Study of Hg22+ and complexes of NpO2+ and UO22+ in solution. examples of cation-cation interactions

Density functional theory (BPW91/TZ2P) is used to explore the nature of cation-cation interactions (CCIs) that exist between two actinyl cations in solution. Solvation, which is modeled using COSMO, favors the complexes (ONpO-ONpO)2+ and (ONpO-OUO)3+ over separated NpO2+(aq) and UO2(2+)(aq) cations because of the quadratic dependence of solvation on charge. For (OUO-OUO)4+, solvation effects, even though very large, are unable to overcome intrinsic electrostatic repulsion between the units. The actinyl-actinyl complexes are T-shaped, with the oxygen of one unit coordinated to the actinide metal of the other unit. The association free energies of (ONpO-ONpO)2+ and (ONpO-OUO)3+ are calculated as -42.1 and -29.2 kcal/mol. Explicit consideration of the first solvation shell at the B3LYP/LANL2DZ level suggests that the free energies of binding may be overestimated. The Hg2(2+) dication, though not considered a "traditional" CCI, is very similar to the actinyl-actinyl interaction. The binding free energy of Hg2(2+) in solution is calculated as -16.0 kcal/mol.     

Parameters affecting the separation of intact proteins in gradient-elution reversed-phase chromatography using poly(styrene-co-divinylbenzene) monolithic capillary columns

An experimental study was performed to investigate the effects of column parameters and gradient conditions on the separation of intact proteins using styrene-based monolithic columns. The effect of flow rate on peak width was investigated at constant gradient steepness by normalizing the gradient time for the column hold-up time. When operating the column at a temperature of 60 °C a small C-term effect was observed in a flow rate range of 1–4 μL/min. However, the C-term effect on peak width is not as strong as the decrease in peak width due to increasing flow rate. The peak capacity increased according to the square root of the column length. Decreasing the macropore size of the polymer monolith while maintaining the column length constant, resulted in an increase in peak capacity. A trade-off between peak capacity and total analysis time was made for 50, 100, and 250 mm long monolithic columns and a microparticulate column packed with 5 μm porous silica particles while operating at a flow rate of 2 μL/min. The peak capacity per unit time of the 50 mm long monolithic column with small pore size was superior when the total analysis time is below 120 min, yielding a maximum peak capacity of 380. For more demanding separations the 250 mm long monolith provided the highest peak capacity in the shortest possible time frame.     

Adenine versus guanine quartets in aqueous solution: dispersion-corrected DFT study on the differences in π-stacking and hydrogen-bonding behavior

We have investigated the performance of the dispersion-corrected density functionals (BLYP-D, BP86-D and PBE-D) and the widely used B3LYP functional for describing the hydrogen bonds and the stacking interactions in DNA base dimers. For the gas-phase situation, the bonding energies have been compared to the best ab initio results available in the literature. All dispersion-corrected functionals reproduce well the ab initio results, whereas B3LYP fails completely for the stacked systems. The use of the proper functional leads us to find minima for the adenine quartets, which are energetically and structurally very different from the C_4h structures, and might explain why adenine has to be sandwiched between guanine quartets to form planar adenine quartets.     

H2 adsorption on 3d transition metal clusters: a combined infrared spectroscopy and density functional study

The adsorption of H2 on a series of gas-phase transition metal (scandium, vanadium, iron, cobalt, and nickel) clusters containing up to 20 metal atoms is studied using IR-multiple photon dissociation spectroscopy complemented with density functional theory based calculations. Comparison of the experimental and calculated spectra gives information on hydrogen-bonding geometries. The adsorption of H2 is found to be exclusively dissociative on Sc(n)O+, V(n)+, Fe(n)+, and Co(n)+, and both atomic and molecularly chemisorbed hydrogen is present in Ni(n)H(m)+ complexes. It is shown that hydrogen adsorption geometries depend on the elemental composition as well as on the cluster size and that the adsorption sites are different for clusters and extended surfaces. In contrast to what is observed for extended metal surfaces, where hydrogen has a preference for high coordination sites, hydrogen can be both 2- or 3-fold coordinated to cationic metal clusters.     

Isoform separation of a multi-acetylated protein using capillary polystyrene-divinylbenzene monolithic columns

Capillary polystyrene-divinylbenzene (PS-DVB) monolithic columns were used to separate differentially acetylated intact IM9 protein isoforms. Compared to the unmodified form, the hydrophobic shift for intact acetylated isoforms was significant under standard reversed-phase conditions (32.5-45% acetonitrile in 10 min). The high chromatographic resolution of the PS-DVB monolithic columns resulted in peak widths at half height of 4-5s. This allowed us to nearly completely resolve a number of peaks greater than the number of possible acetylation sites. This observation suggested that not only the number, but also the location of the acetylations on the protein had a significant effect on the retention. Matrix-assisted laser desorption ionization time-of-flight MS and MS/MS were used to confirm the chromatographic separation of isoforms. It was found that the acetylations site, especially on the N-terminus, has an effect on the retention on the PS-DVB column.