An efficient two-step synthesis of 3-allylindoles

A two-step synthetic sequence for an efficient synthesis of 3-allylindoles is described.     

Chemical synthesis of p-type nanocrystalline copper selenide thin films for heterojunction solar cells

Nanocrystalline thin films of copper selenide have been grown on glass and tin doped-indium oxide substrates using chemical method. At ambient temperature, golden films have been synthesized and annealed at 200 °C for 1 h and were examined for their structural, surface morphological and optical properties by means of X-ray diffraction (XRD), scanning electron microscopy and UV-vis spectrophotometry techniques, respectively. Cu_2−xSe phase was confirmed by XRD pattern and spherical grains of 30 ± 4 - 40 ± 4 nm in size aggregated over about 130 ± 10 nm islands were seen by SEM images. Effect of annealing on crystallinity improvement, band edge shift and photoelectrochemical performance (under 80 mW/cm² light intensity and in lithium iodide electrolyte) has been studied and reported. Observed p-type electrical conductivity in copper selenide thin films make it a suitable candidate for heterojunction solar cells.     

Lyoluminescence of luminol in aqueous amines

Lyoluminescence of luminol induced by -irradiated NaCl has been studied in aqueous amines. The emission spectra of lyoluminescence are recorded on 400 ASA Kodak film using a Fuess spectrograph. A broad continuous emission band appears in the visible region from 390 to 500 nm. The emission band showed two peaks centered at 430 and 470 nm. The 430 nm peak is more intense in secondary amines while the 470 nm band is more intense in primary amines. The mechanism of light emission is based on the comparative study of lyoluminescence, fluorescence and chemiluminescence of luminol in aqueous amines.     

A new access to polyhydroxy piperidines of the azasugar class: synthesis and glycosidase inhibition studies

A new synthetic strategy has been devised to access a variety of polyhydroxylated piperidines belonging to the azasugar class of glycosidase inhibitors. The key precursor (3aR, 7aR)-5-benzyl-2,2-dimethyl-7-methylenehexahydro[1,3]dioxo[4,5-c]pyridine is obtained by photoinduced electron transfer (PET) cyclization of the corresponding alpha-trimethylsilylmethylamine radical cation to the tethered acetylene functionality. The new molecules have been evaluated for inhibitory properties for certain beta-glycosidases and have been found to be moderate to weak inhibitors of the enzymes under study.     

Green synthesis and characterization of silver nanoparticles by Allium cepa L. to produce silver nano‐coated fabric and their antimicrobial evaluation

This research work was proposed to study the antimicrobial activity of the silver nanocoated fabric with the purpose of producing good dressing and clothing material. We synthesized simple, ecofriendly, cost‐effective and sustainable silver nanoparticles by using the aqueous extract of Allium cepa L. Here, A. cepa L. acts as a good reducing and capping agent that produced stable silver nanoparticles having particle size of range 36 ± 1 to 98 ± 2 nm, Poly dispersiblity index 0.234 ± 0.61 to 1.023 ± 0.33 and Zeta potential ‐12 ± 1.5 mV to ‐26 ± 1.2 mV. The effect of temperature and extract volume used was considered for optimization of synthetic procedure. The nanocoated fabric was characterized for morphological study, size (using transmission electron microscopy (TEM) and field emission scanning electron microscopy (FE‐SEM) and zeta‐potential (Zeta Potentiometer). The presence of functional groups were observed by using attenuated total reflection‐Fourier transform infrared (ATR‐FTIR) and Raman spectroscopy. The crystallinity and structural property of the synthesized silver nanoparticles were studied in terms of Powder X‐ray diffraction (PXRD). An IC₅₀ value and zone of inhibition was studied which demonstrate that the silver nanocoated fabric have an excellent antibacterial property against Gram‐negative (Escherichia coli) and Gram‐positive (Staphylococcus aureus) bacteria. Further nanocoated fabric material was washed (with function of time 0, 10, 25, and 50 laundry cycles) and still retained their anti‐bacterial activity towards both strain. Initially there was 52 μg/ml of silver nanoparticles on the cotton fabric but after 50 laundry cycle in 500 ml of distilled water the fabric showed 92% efficiency against gram positive and 90% efficacy toward gram negative bacteria. It was found that 4.16 μg/ml nano particles leached in case of S. Aureus and 5.2 μg/mL silver nanoparticles leached in case of E. coli. Nanocoated fabric material synthesized using green synthesis was found to be economical with good resistance to washing.     

Biodegradation of Phenol by the Yeast Candida tropicalis: An Investigation by NMR Spectroscopy

The process of phenol biodegradation by the yeast Candida tropicalis NCIM 3556 in aqueous medium was studied by ¹H, ¹³C, and DOSY NMR techniques. Samples at regular intervals were centrifuged to separate the cells, and ¹H spectral data were collected at 400 MHz. Though a gradual decrease in the concentration of phenol was observed, after an incubation period of ~8 h, formation of any intermediate products could not be detected. Experiments carried out with uniformly ¹³C-labeled phenol also failed to detect formation of any carboxylic acid intermediates during degradation. The studies indicated that the phenol was completely degraded to carbon dioxide and water in approximately 20 h. Self-diffusion coefficient measurements showed that the lifetime of phenol in the bound form is too small to impart any change in its diffusion behavior and the intermediates formed are converted to carbon dioxide and water at a very fast rate.     

Pd–phosphinesulfonate bravely battles the “vinyl halide insertion copolymerization” barricade

This overview provides insights into the current state‐of‐the‐art solutions to insertion copolymerization of functional olefinic monomers. The challenges in insertion copolymerization of functional olefinic monomers, with a special emphasis on vinyl halides, are highlighted. The crucial design of the Pd–phosphinesulfonate [Pd(PO)] enables up to 3.6 mol % incorporation of vinyl fluoride (VF) in an ethylene–VF copolymerization reaction. In a significant development, insertion copolymerization of industrially relevant functional olefin, that is, vinyl chloride (VC), was unambiguously ascertained, and a detectable amount of VC (0.4 mol %) was incorporated (at the chain end). In a detailed investigation, the in situ existence of (PO)Pd? H species during the polymerization was revealed, and it was demonstrated that these are indeed responsible for VC incorporation. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1–6     

Total synthesis of attenols A and B

A concise approach for the total synthesis of attenols A and B is described involving MacMillan’s α-aminooxylation, Evan’s asymmetric alkylation, Brown’s allylation, and spiro-ketalization as key steps. This approach has successfully demonstrated the α-aminooxylation protocol for the construction of the anti-1,3-diol unit.