PVT properties of PUREX/UREX solvent tri-n-butyl phosphate

Tri-n-butyl phosphate (TBP) is the workhorse of solvent extraction operations in nuclear fuel cycle as well as an important industrial chemical. Its PVT properties are not available in literature. In this study, PVT properties of TBP, estimated using group contribution method, are reported. Wagner constants were also reported in the range of 273.15?K to critical temperature.     

Thiosemicarbazone Complexes of Ruthenium(II) and Rhodium(I) Containing Triphenylphosphine

Several new hexa-coordinated ruthenium(II) and penta-coordinated rhodium(I) complexes of the types [RuCl(CO)(PPh ₃ ) ₂ (TSC)], [RuH(CO)(PPh ₃ ) ₂ (TSC)], and [Rh(PPh ₃ ) ₃ (TSC)] (where TSC = anion of thiosemicarbazone Schiff bases) have been prepared by the reactions of [RuHCl(CO)(PPh ₃ ) ₃ ], [RuH ₂ (CO)(PPh ₃ ) ₃ )], and [RhH(PPh ₃ ) ₄ ] with thiosemicarbazones of 2-furaldehyde (H-FTSC), thiophene-2-carboxaldehyde (H-TCTSC), p-anisaldehyde (H-ATSC), piperonaldehyde (H-PTSC), and cyclohexanone (H-CTSC). All the new complexes obtained have been characterized on the basis of elemental analysis, IR, ¹ H NMR, ³¹ P NMR, and electronic spectral data.     

Photochemistry of Macromolecular Dyes in Aqueous Solutions

Thiazine and phenazine dyes are known to exhibit photoredox behavior in the excited states of these molecules. These dyes are covalently attached to macromolecules, and the photochemistry has been investigated in homogeneous solution and as thin films coated onto electrodes. Flash photolysis of the macromolecular thionine in the presence of quenchers shows reduction of the dye and the subsequent disproportionation of the reduced dye. In the case of macromolecular thionine, evidence for the formation of a complex between ferrous ion and thionine is observed in the flash photolysis experiments. Photoelectrochemical studies show a new type of behavior for the macromolecular dye films coated onto electrodes. Macromolecular thionine film coated onto platinum electrode makes the electrode a cathode on illumination of the electrode. Macromolecular phenosafranine dye films coated onto electrodes change the polarity of the illuminated electrode depending upon the nature of the macromolecule.     

Flexible Polyester Cellulose Paper Supercapacitor with a Gel Electrolyte

A low-cost polyester cellulose paper has been used as a substrate for a flexible supercapacitor device that contains aqueous carbon nanotube ink as the electrodes and a polyvinyl alcohol (PVA)-based gel as the electrolyte. Gel electrolytes have attracted much interest due to their solvent-holding capacity and good film-forming capability. The electrodes are characterized for their conductivity and morphology. Because of its high conductivity, the conductive paper is studied in supercapacitor applications as active electrodes and as separators after coating with polyvinylidene fluoride. Carbon nanotubes deposited on porous paper are more accessible to ions in the electrolyte than those on flat substrates, which results in higher power density. A simple fabrication process is achieved and paper supercapacitors are tested for their performance in both aqueous and PVA gel electrolytes by using galvanostatic and cyclic voltammetry methods. A high specific capacitance of 270 F g⁻¹ and an energy density value of 37 W h kg⁻¹ are achieved for devices with PVA gel electrolytes. Furthermore, this device can maintain excellent specific capacitance even under high currents. This is also confirmed by another counter experiment with aqueous sulfuric acid as the electrolyte. The cycle life, one of the most critical parameters in supercapacitor operations, is found to be excellent (6000 cycles) and less than 0.5 % capacitance loss is observed. Moreover, the supercapacitor device is flexible and even after twisting does not show any cracks or evidence of breakage, and shows almost the same specific capacitance of 267 F g⁻¹and energy density of 37 W h kg⁻¹. This work suggests that a paper substrate can be a highly scalable and low-cost solution for high-performance supercapacitors.     

Direct spectrophotometric determination of ruthenium in aqueous streams of nuclear reprocessing

A fiber optic aided spectrophotometric technique has been developed for determination of ruthenium in nitric acid medium. The developed method is simple, accurate and applicable to aqueous streams of nuclear reprocessing. The system obeys Lambert–Beer’s law at 468 nm in the concentration range of 30–360 μg/mL of ruthenium. The molar absorption coefficient, detection limit and Sandell’s sensitivity are 68.477 L Mol^?1 cm^?1, 31 μg/mL and 0.0124 μg/cm² respectively. Relative standard deviation was less than 2 % and correlation coefficient was 0.9998. The results obtained by the developed procedure are in good agreement with those obtained by the standard ICP-OES method. Fission products like zirconium and strontium are not interfering. Uranium is interfering and needs prior separation by solvent extraction method. The developed method is adaptable for remote operation and on-line monitoring.     

Separation and recovery of ruthenium: a review

The chemistry of the noble metal fission product, ruthenium is very complex due to the existence of many oxidation states in addition to forming a large number of co-ordination complexes. In the PUREX process for the separation of U and Pu from the spent nuclear fuels from fast breeder reactors, owing to the high volatile nature of RuO₄ problems arise not only during the extraction stages but also in the treatment of high active liquid waste and subsequent vitrification. As this volatile RuO₄ can deposit in cooler parts, there is an increase in the radiation field due to the presence of ¹⁰⁶Ru. The problem is very acute in the reprocessing of fast reactor fuels due to the increased concentration of ruthenium in the spent fuel. In nitric acid medium Ru can exist in various nitroso nitrate complexes and nitroso complexes are more stable than nitrates. The nitrates are non-extractable by the solvent TBP; however, they are extractable to a higher degree by DBP (the primary degradation product of TBP). The extractability of Ru nitrates into the solvent is inhibited by high acid content, temperature and prolonged hold-up time. Nevertheless, these factors promote the volatilization of Ru as RuO₄. The volatilization is enhanced by the addition of phosphate ions, but is suppressed by phosphite or hypophosphite ions. Thus, it would be advantageous if ruthenium is removed so that not only the purity of the product (Pu) is improved, but also the problem related to volatilisation can be resolved. High molecular weight amines (tertiary amines) capable of forming co-ordinate bonds are reported to be ideal extractants for Ru. Gas phase separation is an effective method for the recovery of Ru from catalysts, lead button and from other platinum group metals. Separation and pre-concentration of noble metals can be accomplished from non-metals by simple sorbents like coconut shell activated carbon to complicated chelating resins, aromatic polymers and zeolites. In the electro-oxidation of active Ru from nitroso salts, Pd was found to interfere and removal of Pd prior to oxidation of Ru is recommended. Redox catalysts such as Ag²⁺ and Ce⁴⁺ are found to play a prominent role in the electro-oxidation of Ru. Though, various methods and extractants are reported in the literature for the separation of Ru, R&D is being pursued for the removal of Ru during aqueous reprocessing of spent fuels using extractants and methods which are conducive to plant conditions. Hence, an exhaustive survey of literature was made and the different methods reported for the removal of Ru with emphasis towards reprocessing applications are discussed in this report as a review. Attempts made by the authors in separating Ru from simulated waste solution are also included in this review.     

Effect of tri-n-butyl phosphate on physical properties of dodecane–nitric acid system

Extraction power of solvent depends upon the physical properties of the system. Tri-n-butyl phosphate (TBP) in dodecane is a versatile solvent used in the nuclear fuel reprocessing like PUREX process. The study of physical properties like density, viscosity, interfacial tension and solubility for TBP–nitric acid–dodecane system will be helpful in carrying out different extraction studies during PUREX process. Thus, physical properties like density, viscosity, interfacial tension and solubility have been measured for TBP–nitric acid–dodecane system using pycnometer, viscometer, pendant drop method and high performance liquid chromatography respectively. It has been observed that density and viscosity increases but interfacial tension and solubility decreases with the concentration of TBP in dodecane–nitric acid system. Physical properties of 30 % TBP–nitric acid–dodecane system have also been studied in detail. All these studies will also be useful in stripping out dissolved TBP from the nuclear waste.     

An algorithm for overlapped chromatogram separation

Non-negative matrix factorization (NMF) is a recently developed method for real time data analysis. In the past it has been used for facial recognition and spectral data analysis. Most of the NMF algorithms do not converge to a stable limit point and uniqueness in results is also a problem in NMF. To improve the convergence, a new NMF algorithm with modified multiplicative update (ML-NMFmse) has been proposed in this work for strongly overlapped and embedded chromatograms separation. To get same results for all the runs, instead of random initialization, three different initialization methods have been used namely, ALS–NMF (robust initialization), NNDSVD based initialization and EFA based initializations. The proposed ML-NMFmse algorithm is applied on the simulated and experimental overlapped chromatograms obtained for acetone and acrolein mixture, using Gas Chromatography–Flame Ionization Detector. Before applying NMF, Principal Component Analysis (PCA) was applied to determine number of components in the mixture taken. The result of proposed ML-NMFmse is compared with that of existing Multivariate Curve Resolution-Alternating Least Squares method in optimal conditions for both the algorithms. In the case of embedded chromatogram, the proposed ML-NMFmse with Robust method (ALS-NMF) of initialization performs better than all other methods. For a resolution of severely overlapped chromatograms, the proposed ML-NMFmse with NNDSVD method of initialization outperforms all other methods.     

The role of crosslinking and polarity in the dark relaxation of azobenzene-based,polymer-stabilised cholesteric liquid crystals

Prior examinations have reported that polymer stabilisation of azobenzene-based cholesteric liquid crystal (CLC) mixtures can reduce the time necessary for complete colour restoration in the dark from three days to as few as five minutes. This work extends upon these prior examinations by exploring and elucidating the role of crosslinker concentration and monomer polarity on the colour restoration of a representative CLC mixture composed of a high HTP bis(azo) binapthanyl chiral dopant (QL76) mixed into the cyanobiphenyl nematic liquid crystal host MDA-00-1444. The impact of these variables was unexpectedly convoluted. In all the formulations examined here, polymer stabilisation dramatically reduces the time for complete colour restoration of the starting reflection notch. In mixtures based on nonpolar liquid crystal monomers, increasing the crosslinker concentration reduces the time necessary for complete colour restoration. However, the dependence on crosslinker concentration reverses in mixtures composed from polar liquid crystal monomers in which increasing the crosslinker concentration serves to increase the time necessary for complete colour restoration.