Rapid ligand substitution reactions in ionic liquids studied by stopped-flow technique

Detailed kinetic studies on ligand substitution reactions of [M(II)(terpy)Cl](+) complexes (M = Pt, Pd; terpy = 2,2':6',2'-terpyridine) with thiourea as entering nucleophile were for the first time performed in the imidazolium based ionic liquid [emim][NTf(2)] using stopped-flow techniques, opening the route to study fast reactions of transition metal complexes in ionic liquids.     

Three-component coordination networks based on [Ru(phen)(CN)4(2-) anions, near-infrared luminescent lanthanide(III) cations, and ancillary oligopyridine ligands: structures and photophysical properties

A series of cyanide-bridged coordination networks has been prepared which contain [Ru(phen)(CN)4](2-) anions, Ln(III) cations, and additional oligopyridine ligands (1,10-phenanthroline, 2,2':6',2'-terpyridine or 2,2'-bipyrimidine) which coordinate to the Ln(III) centres. Five structural types have been identified and examples of each type of structure are described: these are hexanuclear Ru4Ln2 clusters; two-dimensional Ru-Ln sheets with a honeycomb pattern of edge-linked Ru6Ln6 hexagons; one-dimensional chains consisting of two parallel cross-linked strands in a ladder-like arrangement; simple single-stranded chains of alternating Ru/Ln components; and a one-dimensional 'chain of squares' in which Ru2Ln2 squares are linked by bipyrimidine bridging ligands which connect to the Ln(III) corners of adjacent squares in the sequence. The 3MLCT luminescence characteristic of the [Ru(phen)(CN)4](2-) units is quenched in those networks containing Ln(III) which have low-lying near-infrared luminescent f-f states [Pr(III), Nd(III), Er(III), Yb(III)], with sensitised Ln(III)-based near-IR luminescence generated by d --> f energy-transfer. The rate of d --> f energy-transfer, and hence the degree of quenching of the 3MLCT luminescence from the [Ru(phen)(CN)4](2-) units, depends on the availability of f-f levels of an appropriate energy on the Ln(III) centre, with Nd(III) (with a high density of low-lying f-f states) being the most effective energy-acceptor and Yb(III) (with a single low-lying f-f state) being the least effective. Rates of d --> f energy-transfer to different Ln(III) centres could be determined from both the residual (partially quenched) lifetimes of the 3MLCT luminescence, and--in the case of the Yb(III) networks--by a rise-time for the sensitised near-IR luminescence. The presence of the 'blocking' polypyridyl ligands, which reduced the number of cyanide and water ligands that would otherwise coordinate to the Ln(III) centres, resulted in increases in the Ln(III)-based emission lifetimes compared to networks where these blocking ligands were not used.     

Coupling of whispering-gallery modes in size-mismatched microdisk photonic molecules

Mechanisms of whispering-gallery (WG)-mode coupling in microdisk photonic molecules (PMs) with slight and significant size mismatches are numerically investigated. The results reveal two different scenarios of modes interaction depending on the degree of this mismatch and offer new insight into how PM parameters can be tuned to control and modify WG-mode wavelengths and Q factors. From a practical point of view, these findings offer a way to fabricate PM microlaser structures that exhibit low thresholds and directional emission and at the same time are more tolerant to fabrication errors than previously explored coupled-cavity structures composed of identical microresonators.     

High-efficiency 1.5 microm thick optical axis grating and its use for laser beam combining

We demonstrate an optical axis grating (OAG) recorded in a nematic liquid crystal that yields a higher than 80% diffraction efficiency and over 800:1 switching contrast between diffraction orders for a laser beam of a red wavelength in a material layer only 1.5 microm thick. The grating was used for combining two laser beams with high efficiency. These observations prove the feasibility of new generation high-efficiency diffractive optical components, which are most promising for infrared and high-power applications owing to their enhanced transparency and reduced thermal effects in thin material layers.     

One-dimensional manganese coordination polymers composed of polynuclear cluster blocks and polypyridyl linkers: structures and properties

The synthesis, crystal structures and magnetic properties of five new manganese compounds are reported. These include a linear trinuclear cluster [Mn(II)(3)(O(2)CCHMe(2))(6)(dpa)(2)].2MeCN (1) (dpa = 2,2'-dipyridylamine), a tetranuclear cluster [Mn(II)(2)Mn(III)(2)O(2)(O(2)CCMe(3))(6)(bpy)(2)] (3) (bpy = 2,2'-bipyridine), and chain coordination polymers composed of cluster blocks such as Mn(3), Mn(3)O, and Mn(4)O(2) bridged by 2,2'-bipyrimidine (bpm) or hexamethylentetramine (hmta) ligands to give ([Mn(II)(3)(O(2)CCHMe(2))(6)(bpm)].2EtOH)(n) (2), [Mn(II)(2)Mn(III)(2)O(2)(O(2)CCHMe(2))(6)(bpm)(EtOH)(4)](n) (4), and (([Mn(II)Mn(III)(2)O(O(2)CCHMe(2))(6)(hmta)(2)].EtOH)(n) (5). The magnetic analysis of the compounds was achieved using a combination of vector coupling and full-matrix diagonalization methods. Susceptibility data for compound 1 was fitted using a vector coupling model to give g = 2.02(1) and 2J/k(B) = -5.38(2) K. To model the trimer chain, we used vector coupling for initial values of J(1) and then diagonalization techniques to estimate J(2) to give g = 1.98(1), 2J(1)/k(B) = -3.3(1) K and 2J(2)/k(B) = -1.0(1) K by approximating the system to a dimer of trimers. The analysis of 3 was made difficult by the mixture of polymorphs and the difficulties of a three-J model, while for 4 an analysis was not possible because of the size of the computation and the relative magnitudes of the three couplings. Compound 5 was modeled using the same techniques as 2 to give g = 1.99(1), 2J(1)/k(B) = +32.5(2) K, 2J(2)/k(B) = -16.8(1) K, and 2J(3)/k(B) = +0.4(1) K. The combination of techniques has worked well for compounds 2 and 5 and thus opens up a method of modeling complex chains.     

Vapour pressure and enthalpy of vaporization of aliphatic dialkyl carbonates

Molar enthalpies of vaporization of aliphatic alkyl carbonates: dimethyl carbonate [616-38-6], diethyl carbonate [105-58-8], di-n-propyl carbonate [623-96-1], di-n-butyl carbonate [542-52-9], and dibenzyl carbonate [3459-92-5] were obtained from the temperature dependence of the vapour pressure measured by the transpiration method. A large number of the primary experimental results on temperature dependences of vapour pressures have been collected from the literature and have been treated uniformly in order to derive vaporization enthalpies of dialkyl carbonates at the reference temperature 298.15 K. An internal consistency check was performed on enthalpy of vaporization values for dialkyl carbonates studied in this work.     

Tetramerization of 3-methyl-cyclopropene-3-carbonitrile: a novel CN-alder-ene reaction

At elevated temperatures 3-methyl-cyclopropene-3-carbonitrile 1 was found to tetramerize giving compound 2 (3-methyl-2,3-bis(2-t-methyl-2-c-cyanocyclopropyl)-1-(2-t-methyl-2-c,3-c-dicyanocyclopropyl)-cyclopropene) in good yields. This is the first example of Alder-ene type oligomerization of a 3,3-disubstituted cyclopropene. On the basis of the product geometry and stereoselective character of the reaction, a mechanism of formation of 2 involving CN-Alder-ene reaction was proposed. DFT modeling of the mechanism has shown that the CN-Alder-ene reaction is possible as a stepwise process involving a biradical intermediate.     

Palladium-catalyzed amination in the synthesis of macrocycles comprising cholane, polyamine and pyridine units

3,24-Bis(6-chloropyridin-2-yloxy)cholane, obtained from 3,24-cholandiol via a Mitsunobu reaction, was successfully used for the synthesis of a variety of polyazamacrocycles using Pd-catalyzed amination reaction with linear polyamines. The competing formation of cyclodimers and other cyclic oligomers was found to be strongly dependent on the nature of the polyamines employed.     

IR and NMR spectra, intramolecular hydrogen bonding and conformations of mercaptothiacalix[4]arene molecules and their para-tert-butyl-derivative

It is demonstrated that the introduction of p-tert-butyl groups dramatically influences the conformational behaviour of the mercaptothiacalix[4]arene molecules. Quantum-chemical computations in combination with IR and NMR spectroscopy prove that, in contrast to closely related calixarenes, the 1,3-alternate becomes a dominant conformer of p-tert-butyl-mercaptothiacalix[4]arene not only in crystal, but also in solutions and in vacuum. It is shown that the title molecules form essentially non-cooperative intramolecular hydrogen bonds: their SH groups are intramolecularly H-bonded solely to the sulfide groups bridging thiophenolic units. The enthalpy of this bonding, evaluated from Iogansen’s rule, amounts to ca. 1.5 kcal mol⁻¹ per one SH···S bond, which about four times smaller than the enthalpies of cooperative intramolecular H-bonds formed by related calixarenes and thiacalixarenes. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Study on the formation of an amoxicillin adduct with methanol using electrospray ion trap tandem mass spectrometry

The possibility of using the protonated methanol-adduct of antimicrobial amoxicillin for its identification and quantification at residue levels has been investigated, since it is impossible to completely suppress the formation of these adducts when methanol is present in the solvent system. This process has been monitored over time and as a function of concentration. It was determined that adducts were instantly formed and that the abundance of the protonated methanol-adduct at m/z 398 increased at the expense of the protonated molecule m/z 366 with storage time. The effect of several common solvents and mobile-phase additives on the ionization efficiency of amoxicillin and the formation of the methanol adduct has also been investigated. It was shown that the mass spectra of amoxicillin were strongly influenced by the solvent in which the analyte is dissolved and by the analyte concentration, as well as by the composition of mobile phase. Methanol was determined to be the best spray solvent, as it provided spectra with the lowest abundance of dimer ions. It was also determined that acetic acid as the mobile-phase additive provided the highest signal intensities, while ammonium acetate should not be used as an additive for the determination of amoxicillin at residue levels. Using high-performance liquid chromatography/electrospray ionization tandem mass spectrometry (HPLC/ESI-MS/MS), fragmentation of the protonated molecules and the protonated methanol-adduct ions, in both positive and negative ion mode, has been performed. The fragmentation was stable and strong product ion spectra were obtained. The linearity of the MS detector response, and that of the chromatographic method, was tested. Due to the linear behaviour it was concluded that the protonated methanol-adduct ion can be used for analytical purposes, i.e. for identification and quantification of amoxicillin at trace levels.