Simultaneous analysis of vocal fold vibration and transglottal airflow: exploring a new experimental setup

The purpose of this study was to develop an analysis system for studying the relationship between vocal fold vibration and the associated transglottal airflow. Recordings of airflow, electroglottography (EGG), oral air pressure, and acoustic signals were performed simultaneously with high-speed imaging at a rate of approximately 1900 frames/s. Inverse filtered airflow is compared with the simultaneous glottal area extracted from the high-speed image sequence. The accuracy of the synchronization between the camera images and the foot pedal synchronization pulse was examined, showing that potential synchronization errors increase with time distance to the synchronization pulse. Therefore, analysis was limited to material near the synchronization pulse. Results corroborate previous predictions that air flow lags behind area, but also they reveal that relationships between these two entities may be complex and apparently varying with phonation mode.     

Single-fiber diffuse optical time-of-flight spectroscopy

We demonstrate interstitial diffuse optical time-of-fight spectroscopy based on a single fiber for both light delivery and detection. Detector saturation due to the massive short-time reflection is avoided by ultrafast gating of a single photon avalanche diode. We show that the effects of scattering and absorption are separable and that absorption can be assessed independently of scattering. Measurements on calibrated liquid phantoms and subsequent Monte Carlo-based evaluation illustrate that absorption coefficients can be accurately assessed over a wide range of medically relevant optical properties. Our findings pave the way to simplified and less invasive interstitial in vivo spectroscopy.     

Comparing closed quotient in children singers' voices as measured by high-speed-imaging, electroglottography, and inverse filtering

The closed quotient, i.e., the ratio between the closed phase and the period, is commonly studied in voice research. However, the term may refer to measures derived from different methods, such as inverse filtering, electroglottography or high-speed digital imaging (HSDI). This investigation compares closed quotient data measured by these three methods in two boy singers. Each singer produced sustained tones on two different pitches and a glissando. Audio, electroglottographic signal (EGG), and HSDI were recorded simultaneously. The audio signal was inverse filtered by means of the decap program; the closed phase was defined as the flat minimum portion of the flow glottogram. Glottal area was automatically measured in the high speed images by the built-in camera software, and the closed phase was defined as the flat minimum portion of the area-signal. The EGG-signal was analyzed in four different ways using the matlab open quotient interface. The closed quotient data taken from the EGG were found to be considerably higher than those obtained from inverse filtering. Also, substantial differences were found between the closed quotient derived from HSDI and those derived from inverse filtering. The findings illustrate the importance of distinguishing between these quotients.     

Experimental and numerical study on the propagation of impulsive sound around buildings

Propagation of impulsive sound around buildings and induced structural loading are investigated experimentally and numerically. Experiments were conducted on a rectangular building at Virginia Tech using sonic booms generated by shaped charges with an explosive weight of 0.78 kg, constructed from detonation cord. These experiments were simulated with a three-dimensional numerical model, in the context of geometrical acoustics (GA), by combining the image source method for the reflected field (specular reflections) with an extension of the Biot–Tolstoy–Medwin (BTM) method for the diffracted field. In this model, it is assumed that the acoustic propagation is linear and that all surfaces are acoustically rigid. This numerical model is validated against a boundary element (BE) solution and experimental data, showing a good overall agreement. The key advantages of this GA modeling approach for this application include the ability to model large three-dimensional domains over a wide frequency range and also to decompose the sound field into direct, reflected, and diffracted components, thus providing a better understanding of the sound-propagation mechanisms. Finally, this validated numerical model is used to investigate sound propagation around a cluster of six rectangular buildings, for a range of elevated source positions simulating sonic booms from aircraft.     

PIV measurements in a liquid–liquid system at volume percentages up to 10% dispersed phase

In this study the effect of the volume percentage dispersed phase on the flow structure in an immiscible liquid–liquid system is investigated. A model system, consisting of two refraction index matched liquids, is presented along with velocity measurements of the continuous phase utilising the particle image velocimetry technique. Velocity fields at three locations have been measured inside a baffled cylindrical tank, stirred with a six-bladed Rushton turbine. The experiments show that this technique is applicable for volume fractions of up to 10% of dispersed phase. The magnitudes of velocity and turbulence are clearly affected by the level of the dispersed volume fraction.     

Oxidation of 4H-SiC covered with a SmSix surface alloy

Oxidation of Sm/4H-SiC is studied by X-ray photoemission spectroscopy (XPS) and low energy electron diffraction (LEED). In particular, we report kinetic information from the oxidation of a SmSi_x (1 × 1) surface alloy formed on (0 0 0 1) 4H-SiC. During the initial oxidation of the SmSi_x alloy, a (2 × 2)-LEED pattern is observed. Furthermore, the Sm 2+ valency observed from the clean SmSi_x surface alloy, which is related to surface samarium atoms, disappear at 15 L oxygen exposure. The oxygen atom is consequently deduced to be located at bridge or hollow sites involving one Sm atom. The initial oxidation result in an oxygen deficit SmSiO_x interface oxide, probably as a consequence of the high oxidation temperatures in this work (900-1050 °C). We report that in a prolonged oxidation (longer than 10 kL) a SiO₂ layer forms on top of the samarium silicon oxide interface layer.     

Subsurface As-layer formation in Au films deposited on GaAs(001)

Au deposited at room temperature on MBE grown GaAs (001) has been studied by UPS, XPS and AES. At Au coverages below ～2Å the adsorption interaction spreads the Au (6s) states density over the width of the GaAs valence band, while at higher coverages the Au overlayer has metallic properties. For the thick Au overlayers a subsurface As-rich region is established. It is suggested that this has a stabilizing influence on the continuous Au overlayer.