Estimation of higher-order magnetic spin interactions of Fe(III) and Gd(III) ions doped in α-alumina powder with multifrequency EPR

Fe(III) and Gd(III) ions in α-alumina (A1₂O₃) exhibit spin states ofS = 5/2 andS = 7/2 respectively. The magnitude of the zero-field interaction (ZFI) (D = 0.10?0.15 cm^?1) gives rise to an inter Kramers doublet splitting in the same order of magnitude as the X-band electron paramagnetic resonance (EPR) quantum (0.3 cm^?1). It is demonstrated that through a careful step-by-step analysis and spectral simulation of EPR spectra taken at D-band (130 GHz), Q-band (35 GHz), and X-band (9 GHz) at room temperature, the (relative) sign and magnitude of the ZFI parameters, b ₂ ⁰ , b ₄ ⁰ , and b ₄ ³ , can be reliably estimated.     

Suppression of the sawtooth instability in a storage ring by free-electron laser: an example of nonlinear stabilization by noise

The stabilization of nonlinear excitations by noise is a topic of fundamental importance in many physical problems. We discuss a genuine example within the context of storage ring-free electron laser physics, by presenting a model which allows the characterization of the system evolution and the determination of the conditions leading to the suppression of instabilities of sawtooth type. The conclusions of the model are confirmed by a comparison with experimental results on the Super Aco Storage Ring-Free Electron Laser.     

Modular Hypergeometric Residue Sums of Elliptic Selberg Integrals

It is shown that the residue expansion of an elliptic Selberg integral gives rise to an integral representation for a multiple modular hypergeometric series. A conjectural evaluation formula for the integral then implies a closed summation formula for the series, generalizing both the multiple basic hypergeometric ₈₇ sum of Milne-Gustafson type and the (one-dimensional) modular hypergeometric ₈₇ sum of Frenkel and Turaev. Independently, the modular invariance ensures the asymptotic correctness of our multiple modular hypergeometric summation formula for low orders in a modular parameter.     

Modeling of InGaAsP–InP 1.55 μm lasers with integrated mode expanders using fiber-matched leaky waveguides

A new concept for InGaAsP–InP 1.55 μm lasers integrated with spot size converters using leaky waveguides is presented. The large fundamental mode size and the high discrimination of the higher order modes make ARROWs (Antiresonant Reflecting Optical Waveguides) and antiguided waveguides useful for fiber coupling functions. Three-dimensional (3-D) beam propagation method (BPM) results show that the devices have transformation losses lower than 0.22 dB. Fiber-coupling efficiencies of 60% are possible with standard cleaved single-mode fibers (SMF). The horizontal and vertical FWHM can be efficiently reduced to 9.70° (horizontal) and 17.80° (vertical). The fabrication of such devices avoids the growth of thick layers of quaternary material with a low Ga and As fraction, and simplifies the fabrication to one planar epitaxial growth step and one non-critical conventional etch. Received: 16 May 2001 / Published online: 30 October 2001     

紫外激光晶体Ce~(3+)∶LiSrAlF_6发光温度依赖中的陷阱效应

在 10 5～ 30 0K温区内 ,测量了X射线激发下Ce3+ ∶LiSrAlF6晶体发光强度的温度依赖 (I T) ,在 2 37～30 0K温区内发光强度有特殊的增强结构 ,结合 10 5～ 30 0K温区内热释光的测量 ,证实这种发光强度的增强效应是由于陷阱参与发光过程所导致。通过对热释光曲线的进一步分析 ,得到深度分别为 0 5 1eV和 0 5 5eV的陷阱能级 ,这些陷阱主要源于Ce3 + 取代Sr2 + 所形成的杂质缺陷和基质LiSrAlF6中的F-空位以及Li+ 空位所形成的本征缺陷。     

Unambiguous identification of three beta-decaying isomers in 70Cu

Using resonant laser ionization, beta-decay studies, and for the first time mass measurements, three beta-decaying states have been unambiguously identified in 70Cu. A mass excess of -62 976.1(1.6) keV and a half-life of 44.5(2) s for the (6-) ground state have been determined. The level energies of the (3-) isomer at 101.1(3) keV with T(1/2)=33(2) s and the 1+ isomer at 242.4(3) keV with T(1/2)=6.6(2) s are confirmed by high-precision mass measurements. The low-lying levels of 70Cu populated in the decay of 70Ni and in transfer reactions compare well with large-scale shell-model calculations, and the wave functions appear to be dominated by one proton-one neutron configurations outside the closed Z=28 shell and N=40 subshell. This does not apply to the 1+ state at 1980 keV which exhibits a particular feeding and deexcitation pattern not reproduced by the shell-model calculations.     

Mechanosynthesis of YIG and GdIG: A Structural and Mössbauer Study

We have investigated the mechanosynthesis of gadolinium and yttrium iron garnets by high-energy ball-milling of α-Fe₂O₃ and Gd₂O₃ or α-Fe₂O₃ and Y₂O₃, respectively, followed by short thermal annealings conducted at moderate temperatures. The samples were characterized by X-ray diffraction and Mössbauer spectroscopy, in order to determine the influence of the milling time and annealing conditions on the final products. For as-milled samples of each rare-earth system, the results revealed the formation of perovskite phases, in relative amounts that depend on the milling time. The formation of garnet phases was observed in as-annealed samples treated at 1000°C for 2 h or 1100°C for 3 h, i.e., at very modest annealing requirements when compared with ordinary solid-state-reaction processes performed without previous high-energy milling. Also, the occurrence was verified of a milling time for which the relative amount of garnet phases formed by annealing was maximized. This time depends on the rare-earth composing the garnet phase and on the annealing temperature.     

Optimization of the irradiation power in chemical exchange dependent saturation transfer experiments

In chemical exchange dependent saturation transfer imaging experiments, exchangeable solute protons are saturated and the transfer of saturation to water is subsequently detected. When the applied irradiation power is comparable to the resonance frequency difference between the water protons and saturated solute protons, the proton transfer (PT) efficiency is reduced due to concomitant direct saturation effects. In this study, the PT process is modeled using a two-pool system. An empirical general proton transfer ratio (PTR) equation for arbitrary RF irradiation power is derived, and its optimal power to maximize the PTR is analyzed. The results are confirmed experimentally on 4.7 T using a poly-L-lysine solution. The theory provides a useful tool for optimizing the irradiation power of the PT sequences in the presence of direct saturation effects.     

New source of dense, cryogenic positron plasmas

We have developed a new method, based on the ballistic transfer of preaccumulated plasmas, to obtain large and dense positron plasmas in a cryogenic environment. The method involves transferring plasmas emanating from a region with a low magnetic field (0.14 T) and relatively high pressure (10(-9) mbar) into a 15 K Penning-Malmberg trap immersed in a 3 T magnetic field with a base pressure better than 10(-13) mbar. The achieved positron accumulation rate in the high field cryogenic trap is more than one and a half orders of magnitude higher than the previous most efficient UHV compatible scheme. Subsequent stacking resulted in a plasma containing more than 1.2 x 10(9) positrons, which is a factor 4 higher than previously reported. Using a rotating wall electric field, plasmas containing about 20 x 10(6) positrons were compressed to a density of 2.6 x 10(10) cm(-3). This is a factor of 6 improvement over earlier measurements.