Determination of alcohol polyether average molar oligomer value/distribution via supercritical fluid chromatography coupled with UV and MS detection

Supercritical fluid chromatography (SFC) was used for the analysis of ethoxylated and propoxylated surfactants. Samples were derivatized to phenylated silyl ethers with a disilazane-chlorosilane mixture. Addition of a phenyl group to the surfactant allowed UV-absorbance detection of each oligomer. Acetonitrile and methanol were evaluated as mobile phase modifiers. Better peak shape was realized with methanol-modified CO2 on an octadecyl silica bonded phase than with acetonitrile-modified CO2. Peak assignments were made via SFC coupled with electrospray ionization-mass spectrometry (ESI-MS) in the positive ion mode. A sulfonamide-embedded alkyl stationary phase was also evaluated for separation of the derivatized samples. SFC-UV and SFC-ESI-MS data were jointly used for calculation of average molar oligomer values which were then compared to values calculated from 1H NMR data of non-derivatized samples. The derivatization or separation method using the sulfonamide embedded phase required no preliminary cleanup and yielded reproducible oligomer values that were consistent with those of the manufacturer's nominal values.     

Reactive intermediates in asymmetric cross-coupling catalysed by palladium P-N chelates

The palladium dibromide complexes of (S,R)-(1,1′-bis-diphenylphosphino)-2-ferrocencylthyldimethylamine and (S,R)-(1-diphenylphosphino)-2-ferrocenylethyldimethylamine have been reduced with dilithiocyclooctatetraene to form the corresponding Pd⁰ cyclooctatetraene complexes. Their reactions with E-4-methoxy-2′-bromophenylethene, and then benzylmagnesium chloride at −60 to −30°C, provide information on the structure of intermediates in asymmetric cross-coupling.     

Real-time picosecond measurements of electronic energy transfer from DODCI to malachite green and DQOCI

Singlet-singlet resonance energy transfers from DODCI (donor) to malachite green and to DQOCI in ethanolic solutions have been investigated with a real-time picosecond streak-camera (time-resolution 3–5 ps) operating at a repetition rate of 140 MHz, in synchronism with the pulse train from a mode-locked cw dye laser used as excitation source. Acceptor concentrations from 10^?5 M to 7.5 × 10^?3 M were studied and average R_o values of 45.6 Å for malachite green and 61.8 Å for DQOCI are obtained from the directly measured fluorescence decay curves. Departure from Förster kinetics is seen at the lower acceptor concentrations employed.     

Phase stability in the systems AeAl(2-x)Mgx (Ae = Ca, Sr, Ba): electron concentration and size controlled variations on the laves phase structural theme

The systems AeAl(2-x)Mgx (Ae = Ca, Sr, Ba) display electron concentration induced Laves phase structural changes. However, the complete sequence MgCu2 --> MgNi2 --> MgZn2 with increasing x (decreasing electron count) is only observed for Ae = Ca. Compounds SrAl(2-x)Mgx (0 < x < or = 2) and BaAl(2-x)Mgx (x = 0.85 and 2.0) were synthesized and structurally characterized by X-ray diffraction experiments. For the Sr system the structural sequence CeCu2 --> MgNi2 --> MgZn2 occurs with increasing Mg content x. Thus, larger Sr does not allow the realization of the MgCu2 structure at low x. For Ae = Ba a binary compound BaAl2 does not exist, but more Ba-rich Ba7Al13 forms. The reinvestigation of the crystal structure of Ba7Al13 by selected area and convergent beam electron diffraction in a transmission electron microscope revealed a superstructure, which subsequently could be refined from single X-ray diffraction data. The formula unit of the superstructure is Ba21Al40 (space group P31m, Z = 1, a = 10.568(1) angstroms, c = 17.205(6) angstroms). In Ba21Al40 a size match problem between Ba and Al present in Ba7Al13 is resolved. The structure of Ba7Al13 (Ba21Al40) can be considered as a Ba excess variant of the hexagonal MgNi2 Laves phase type structure. An incommensurately modulated variant of the MgNi2 structure is obtained for phases BaAl(2-x)Mgx with x = 0.8-1. At even higher Mg concentrations a structural change to the proper MgZn2 type structure takes place.     

Polymer-additive extraction via pressurized fluids and organic solvents of variously cross-linked poly(methylmethacrylates)

Variously cross-linked poly(methylmethacrylates) (PMMAs) are synthesized with three additives incorporated at theoretically 1000 microg of the additive per gram of prepared polymer. The additives are Irganox 1010, Irganox 1076, and Irgafos 168. The in-house" synthesized polyacrylates are then subjected to supercritical fluid extraction (SFE) to determine if additive recovery is a function of percent cross-linking. Although considerable work in this regard has been performed with non-cross-linked polyolefins, the literature is lacking regarding polyacrylates. Some additive degradation apparently occurs during the synthesis, as judged by the increased complexity of the extract high-performance liquid chromatographic trace and the low percent recoveries observed especially for the Irganoxes. For low polymer cross-linking (1%), it appears that both PMMA synthetic reproducibility and readily observed polymer swelling during SFE are serious issues that adversely affect additive percent recovery and precision of results. Higher percent cross-linking yields more consistent analytical data than low percent cross-linking, even though the amount of additive extracted in all PMMA samples (regardless of cross-linking percentage) is essentially the same whether the extraction is via SFE or liquid-solid extraction with methylene chloride. Results for comparably cross-linked poly(ethylmethacrylate) and poly(butylmethacrylate) are similar to PMMA.     

Dibenzotetraaza crown ethers: a new family of crown ethers based on o-phenylenediamine

Dibenzotetraaza (DBTA) crown ethers possess two o-phenylenediamine moieties. They are homologues of dibenzo crown ether phase-transfer catalysts and were prepared from the condensation of benzimidazoles with oligo(ethyleneglycol) dichlorides and oligo(ethyleneglycol) ditosylates. Compounds with ring sizes ranging from 18-crown-6 to 42-crown-14 were prepared. In addition, various altered benzimidizoles were used to produce DBTA crown ethers with modified substituents and ether bridges, as well as benzimidazolidine crown ethers. The synthetic approach presented here proved to be a convenient route to a new family of crown ethers with overall yields of up to 48% based on the benzimidazole. Yields for the ring-closing step were generally high, ranging from 51% to 94%, without the need for high-dilution conditions. Reaction of the DBTA crown ethers with alkyl and benzyl halides was found to be a facile way to obtain the corresponding tetra(N-organyl) compounds. Picrate extraction studies were carried out to determine phase-transfer catalytic capabilities. Extraction efficiencies for alkali-metal ions were lower than those for dibenzo-18-crown-6. Efficiencies were higher for other metal ions, with some selectivity for Pb(2+). Tetra(N-methyl) DBTA-18-crown-6 generally exhibited higher extraction efficiencies than its N-H analogue, but the selectivity was lower.     

60]- and [70]Fullerenes are trifluoromethylated across 5:6-bonds

Trifluoromethylation of [60]- and [70]fullerenes occurs across both 6:6- and 5:6-bonds giving unsymmetrical tetramethyl adducts having four contiguous CF3 groups; both fullerenes give bis adducts which do not involve 6:6-addition, and unsymmetrical hexa-adducts (with contiguous CF3 groups) are also obtained from [60]fullerene.     

Toward a total synthesis of peloruside A: enantioselective preparation of the C8-C19 region

An efficient synthetic sequence toward the C8-C19 region of peloruside A has been developed. The route is highlighted by a selective electrophilic cyclization reaction, a single-step epoxide ring-opening/methylation sequence, and a stereoselective Mukaiyama aldol reaction. [reaction: see text]     

Structural basis for recognition of bacterial cell wall teichoic acid by pseudo-symmetric SH3b-like repeats of a viral peptidoglycan hydrolase

Endolysins are bacteriophage-encoded peptidoglycan hydrolases targeting the cell wall of host bacteria via their cell wall-binding domains (CBDs). The molecular basis for selective recognition of surface carbohydrate ligands by CBDs remains elusive. Here, we describe, in atomic detail, the interaction between the Listeria phage endolysin domain CBD500 and its cell wall teichoic acid (WTA) ligands. We show that 3′O-acetylated GlcNAc residues integrated into the WTA polymer chain are the key epitope recognized by a CBD binding cavity located at the interface of tandem copies of beta-barrel, pseudo-symmetric SH3b-like repeats. This cavity consists of multiple aromatic residues making extensive interactions with two GlcNAc acetyl groups via hydrogen bonds and van der Waals contacts, while permitting the docking of the diastereomorphic ligands. Our multidisciplinary approach tackled an extremely challenging protein–glycopolymer complex and delineated a previously unknown recognition mechanism by which a phage endolysin specifically recognizes and targets WTA, suggesting an adaptable model for regulation of endolysin specificity.

Combining genetic, biochemical and computational approaches, we elucidated the molecular mechanisms underlying the recognition of Listeria wall teichoic acid by bacteriophage-encoded SH3b repeats.