From allylic alcohols to aldols by using iron carbonyls as catalysts: computational study on a novel tandem isomerization-aldolization reaction

The tandem isomerization-aldolization reaction between allyl alcohol and formaldehyde mediated by [Fe(CO)3] was studied with the density functional B3LYP method. Starting from the key [(enol)Fe(CO)3] complex, several reaction paths for the reaction with formaldehyde were explored. The results show that the most favorable reaction path involves first an enol/allyl alcohol ligand-exchange process followed by direct condensation of formaldehyde with the free enol. During this process, formation of the new C-C bond takes place simultaneously with a proton transfer between the enol and the aldehyde. Therefore, the role of [Fe(CO)3] is to catalyze the allyl alcohol to enol isomerization affording the free enol, which adds to the aldehyde in a carbonyl-ene type reaction. Similar results were obtained for the reaction between allyl alcohol and acetaldehyde.     

Influence of spectral and angular sensitivity on the readout of biological dosimeters

Biological systems used as biological dosimeters can possess different angular sensitivities from the detectors usually used in physical devices. A simple experimental setup has been developed and used to measure the angular sensitivity of uracil thin-layer biological dosimeters. Results of angular sensitivity measurements for uracil thin-layer dosimeters are presented using a Xe arc lamp as the UV source. According to the experiments described here, uracil thin-layer dosimeters show a cosine-type angular dependence. In several indoor experiments broadband UV meters are used to control the applied dose rate from a given artificial UV source. The experimental setup has been designed and used to verify experimentally the importance of spectral and angular sensitivity differences of biological and physical UV meters applied in biological experiments. Model calculations for two different irradiation systems, using different geometrical arrangements of artificial UV sources, are also presented. For these arrangements relative dose rates that could be measured with dosimeters of arbitrary spectral, but different angular sensitivity have been calculated.     

Determination of aliphatic amines in air by membrane enrichment directly coupled to a gas chromatograph

Summary A method is described for the determination of shortchain aliphatic amines in ambient air based on impinger sampling in dilute H₂SO₄, selective enrichment across a PTFE gas membrane and quantification by gas chromatography. The enrichment step is carried out in a flow system directly connected to the chromatograph. The separation is performed on a packed column with nitrogen selective detection. The enrichment per sample volume was in the range 7.3 to 8.2 mL^–1 for C₁–C₆ amines. Detection limits were ca 3–10 nM with enrichment of a 2.9 mL liquid sample. After impinger sampling of 5 m³ air in 10 mL absorption solution, this corresponds, to 0.4–0.8 ng/m³ (ca 0.2–0.5 ppt by volume) in air.     

Correlation between molecular orbitals and doping dependence of the electrical conductivity in electron-doped metal-phthalocyanine compounds

We have performed a comparative study of the electronic properties of six different electron-doped metal-phthalocyanine (MPc) compounds (ZnPc, CuPc, NiPc, CoPc, FePc, and MnPc), in which the electron density is controlled by means of potassium intercalation. Despite the complexity of these systems, we find that the nature of the underlying molecular orbitals produces observable effects in the doping dependence of the electrical conductivity of the materials. For all the MPc's in which the added electrons are expected to occupy orbitals centered on the ligands (ZnPc, CuPc, and NiPc), the doping dependence of the conductivity has an essentially identical shape. This shape is different from that observed in MPc materials in which electrons are also added to orbitals centered on the metal atom (CoPc, FePc, and MnPc). The observed relation between the macroscopic electronic properties of the MPc compounds and the properties of the molecular orbitals of the constituent molecules clearly indicates the richness of the alkali-doped metal-phthalocyanines as a model class of compounds for the investigation of the electronic properties of molecular systems.     

Synthesis and catalytic properties of soluble platinum nanoparticles protected by a thiol monolayer

Several new platinum monolayer protected clusters (MPCs) have been synthesized and characterized. Two methods of platinum reduction were used depending on the solubility of the thiol: sodium borohydride for the water-soluble thiols and lithium triethylborohydride for the organic soluble thiols. In general, reactant solutions containing a 1:1 thiol/Pt ratio yielded the best particles in a single-phase reaction. Higher thiol/Pt ratios produced lower yields of MPCs, while much lower ratios produced gray-black precipitates. The Pt MPCs were used as catalysts to hydrogenate allyl alcohol to propanol by reducing the carbon-carbon double bond. The Pt-mercaptoammonium MPCs were also used as catalysts in the hydrogenation of maleic acid to succinic acid. Differences in the catalytic hydrogenation rates among the various monolayer coatings for MPCs are attributed to the variations in ligand chain length, branching, charged functional groups, packing density, and core size.     

Phase-fixed double-group 3-Γ symbols. IV. Real 3-Γ symbols and coupling coefficients for the group hierarchies T* ⊃ C 3 * and T* ⊃ C 2 *

We present sets of real 3- symbols which correspond to explicitly given irreducible matrix representations for the two double group hierarchies T* C ₃ ^* and T* C ₂ ^* . They fit into the formalism exposed in a previous paper [1] on the general theory of 3- symbols and coupling coefficients and illustrate much of the discussion in a subsequent one [2] treating the particular properties of the double groups.     

The crystal structure of CuSb2O3Br: Slabs from cubic Sb2O3 interspersed between puckered hexagonal CuBr-type layers

The new compound CuSb₂O₃Br crystallize in the monoclinic space group Cc. The unit cell parameters are , , , β=90°, Z=16. The crystal structure is solved from single crystal data, R=0.0490. The compound show a layered structure with slabs from cubic Sb₂O₃ interspersed in between puckered layers of CuBr. The Sb(III) atoms have tetrahedral [SbO₃E] coordination where E is the 5s² lone pair, these units build up Sb₄O₄E₆ cages. The CuBr layers resemble those in hexagonal CuBr but the Cu(I) ions have actually tetrahedral [CuBr₃O] coordination. The Cu-O bonds link the Sb₄O₆ cages with the CuBr layers.     

Theoretical exploration of structure-reactivity relationships in organometallic chemistry: butadiene insertion into the organyltransition-metal bond and conversion of the allyltransition-metal fragment in the [Ni(η-Cp)(η-phenyl)(η-butadiene)] complex

We have theoretically examined the reaction course of the butadiene insertion into the arylNi^II bond in the [Ni^II(η⁵-Cp)(η¹-phenyl)(η²-butadiene)] complex (1), by employing a gradient-corrected DFT method. Critical elementary processes have been scrutinized, viz. monomer insertion, rotational allylic isomerization and allylic η¹-σ→η³-π rearrangement. The first mechanism suggested by Lehmkuhl et al. was refined and supplemented with important details. The critical factors that determine the generation of anti-η³- and syn-η³-allyl isomers of the [Ni^II(η⁵-Cp)(1-benzyl-allyl)] product have been elucidated. This let us to rationalize the experimentally observed, almost exclusive formation of the anti-η³-allyl isomer. Butadiene preferably inserts in η²-mode into the η¹-phenylNi^II bond, initially giving rise to the η¹(C³)-allyl product species, 3σ. The direct formation of the η³-allyl product species, 3π, along the alternative path for η⁴-butadiene insertion, however, is found to be almost entirely disabled kinetically. The thermodynamically favorable η²-trans form of 1 is also shown to be more reactive in accomplishing CC bond formation. Species 3σ is indicated to be a metastable intermediate, occurring in an appreciable stationary concentration. Its respective anti and syn isomeric forms are likely to be in equilibrium, due to the facile rotational isomerization. The subsequent allylic rearrangement into the thermodynamically strongly favorable η³-allylNi^II coordination mode is shown to be the crucial elementary step that discriminates which of the isomeric η³-allyl forms is preferably generated. The higher reactivity of the anti isomer in this process decisively determines the almost exclusive formation of the anti-η³-allyl product species under kinetic control. The requirement of elevated temperatures for the anti-η³-allyl→syn-η³-allyl isomerization to occur, as revealed from experiment, is attributed to the pronounced thermodynamic stability of the η³-allylNi^II coordination.     

Defect trapping by100Pd in fcc metals

Lattice defects in Al, Cu, Ag and Au were studied by the perturbed angular correlation technique (PAC) using the probe atom¹⁰⁰Pd/¹⁰⁰Rh. The comparison of data obtained on interstitial trapping in Cu and Au at different probe atoms (¹⁰⁰pd,¹¹¹In) allows defect characterisation less affected by the respective probe. The trapping efficiency of¹⁰⁰Pd for vacancy like defects is quite different to that of¹¹¹In atoms.