Evaluation of process parameters of ultrasonic treatment of bacterial suspensions in a pilot scale water disinfection system

In this study, several process parameters that may contribute to the efficiency of ultrasound disinfection are examined on a pilot scale water disinfection system that mimics realistic circumstances as encountered in an industrial environment. The main parameters of sonication are: (i) power; (ii) duration of treatment; (iii) volume of the treated sample. The specific energy (E_s) is an indicator of the intensity of the ultrasound treatment because it incorporates the transferred power, the duration of sonication and the treated volume. In this study, the importance of this parameter for the disinfection efficiency was assessed through changes in volume of treated water, water flow rate and electrical power of the ultrasonic reactor. In addition, the influences of the initial bacterial concentration on the disinfection efficiency were examined. The disinfection efficiency of the ultrasonic technique was scored on a homogenous and on a mixed bacterial culture suspended in water with two different types of ultrasonic reactors (Telsonic and Bandelin). This study demonstrates that specific energy, treatment time of water with ultrasound and number of passages through the ultrasonic reactor are crucial influential parameters of ultrasonic disinfection of contaminated water in a pilot scale water disinfection system. The promising results obtained in this study on a pilot scale water disinfection system indicate the possible application of ultrasound technology to reduce bacterial contamination in recirculating process water to an acceptable low level. However, the energy demand of the ultrasound equipment is rather high and therefore it may be advantageous to apply ultrasound in combination with another treatment.     

Study of the neutron quantum states in the gravity field

We have studied neutron quantum states in the potential well formed by the earths gravitational field and a horizontal mirror. The estimated characteristic sizes of the neutron wave functions in the two lowest quantum states correspond to expectations with an experimental accuracy. A position-sensitive neutron detector with an extra-high spatial resolution of m was developed and tested for this particular experiment, to be used to measure the spatial density distribution in a standing neutron wave above a mirror for a set of some of the lowest quantum states. The present experiment can be used to set an upper limit for an additional short-range fundamental force. We studied methodological uncertainties as well as the feasibility of improving further the accuracy of this experiment.Received: 31 July 2004, Published online: 7 March 2005PACS: 03.65, 28.20 Correspondence to: V. Nesvizhevsky     

Undecidable Classical Properties of Observers

A property of a system is called actual, if the observation of the outcome of the test that pertains to that property yields an affirmation with certainty. We formalize the act of observation by assuming the outcome itself is an actual property of the state of the observer after the act of observation and correlates with the state of the system. For an actual property this correlation needs to be perfect. A property is called classical if either the property or its negation is actual. We show by a diagonal argument that there exist classical properties of an observer that he cannot observe perfectly. Because states are identified with the collection of properties that are actual for that state, it follows no observer can perfectly observe his own state. Implications for the quantum measurement problem are briefly discussed. PACS: 02.10-v, 03.65.Ta     

Indications about the shape of the universe from the Wilkinson microwave anisotropy probe data

It is shown that the recent observations of NASA's Explorer mission, "Wilkinson Microwave Anisotropy Probe," hint that our Universe may possess a nontrivial topology. As an example we discuss the Picard space which is stretched out into an infinitely long horn but with finite volume.     

\alpha-decay spectroscopy of light odd-odd Bi isotopes - II: 186Bi and the new nuclide 184Bi

Alpha-decay of the new nuclide ¹⁸⁴Bi has been studied in the complete-fusion reaction ⁹³Nb(⁹⁴Mo, 3n)¹⁸⁴Bi at the velocity filter SHIP. The evaporation residues were separated in-flight and subsequently identified on the basis of recoil- , recoil- - analysis and excitation functions measurements. Two -decaying isomeric states in ¹⁸⁴Bi with half-life values of 13(2) ms and 6.6(1.5) ms were identified. The -branching ratio of ¹⁸⁰Tl was deduced for the first time as . Improved data on the fine-structure -decay of ¹⁸⁶Bi were obtained in the ⁹³Nb(⁹⁵Mo, 2n)¹⁸⁶Bi reaction. A similarity of the decay energies and half-life values of ^184,186Bi is pointed out and a possible explanation for this effect is suggested.Received: 14 March 2003, Revised: 29 April 2003, Published online: 2 September 2003PACS: 23.60.+e decay - 27.70.+q - 27.80.+w K. Heyde: Present address: EP-ISOLDE, CERN, CH-1211, Geneva 23, Switzerland.     

Magnetic phases in Mn<Subscript>1</Subscript>_<Subscript>x</Subscript>Fe<Subscript>x</Subscript>WO<Subscript>4</Subscript> studied by neutron powder diffraction

The magnetic structures of Mn_1-xFe_xWO₄ with x = 0.0, 0.16, 0.21, 0.225, 0.232, 0.24, 0.27, 0.29, and 1.0 were refined from neutron powder diffraction data. The magnetic phase diagram could be completed in the coexistence range of different magnetic structures up to x = 0.29. For the magnetic state at 1.5 K a commensurate antiferromagnetic structure with a propagation vector = (±1/4, 1/2, 1/2) was found for x ⩽ 0.22 while the magnetic spins order with = (1/2, 0, 0) for x ≥ 0.22. In the latter phase, additionally, weak magnetic reflections indexed to an incommensurate ordering with = (- 0.214, 1/2, 0.457) occur in the diffraction pattern up to x = 0.29 indicating the occurence of a reentrant phase. For 0.12 ⩽ x ⩽ 0.29 the low temperature phases are separated from a magnetic high temperature phase showing only magnetic reflections indexed to a spin arrangement with = (1/2, 0, 0). The magnetic phase diagram is discussed qualitatively considering random superexchange between the statistically distributed Mn²⁺- and Fe²⁺-ions in the coexistence range 0.12 ⩽ x ⩽ 0.29 of different magnetic structures related to those of pure MnWO₄ and FeWO₄. Received 9 October 2002 Published online 14 March 2003     

Spectroscopic and atomic force microscopy investigations of hybrid materials composed of fullerenes and 3-aminopropyltrimethoxysilane

Fullerene based materials may open a new horizon in many fields of science. In this study we fabricated thin films of the hybrid materials formed as a result of interactions between C₆₀ fullerenes and 3-aminopropyltrimethoxysilane (APTMS). The deposition technique was a combination of spin-coating and evaporation methods. Interactions within the films were investigated by means of X-ray photoelectron spectroscopy and near edge X-ray absorption fine structure spectroscopy (NEXAFS). Surface morphology was measured by atomic force microscopy (AFM). We found that there are strong chemical reactions between the nucleophilic nitrogen atoms from APTMS and electrophilic fullerene molecules. Results of NEXAFS investigations suggest that due to direct interactions between APTMS and C₆₀ the electronic structure of the fullerene molecules changes while at the same time AFM proved that the C₆₀ molecule diameter is not altered.     

Isomeric states in 214Th and 213Th

Isomeric states in ²¹⁴Th and ²¹³Th were identified by means of γ -rays measured in delayed coincidence with the implanted evaporation residues. These were produced in irradiations of ¹⁶⁴Dy with ⁵⁴Cr projectiles and separated in-flight by the velocity filter SHIP. An isomeric state of I ^π = 8⁺ with a half-life of (1.24±0.12) μs was identified in ²¹⁴Th . The configuration π[1h _9/2 ⊗ 2f _7/2] was assigned to this state. An isomeric state with a half-life of (1.4±0.4) μs was observed in ²¹³Th . Tentatively it was assigned to an I ^π = 13/2⁺ state.     

Binary diffractive beam splitters with arbitrary diffraction angles

Diffractive optical beam splitters designed with iterative Fourier transform type algorithms can produce only certain diffraction angles given by the spatial frequencies used for the computations, which are multiples of a certain base spatial frequency. We have developed a design algorithm that overcomes this limitation and can be used to compute binary diffractive elements with arbitrary diffraction angles. The simulated and experimentally measured properties of optical elements producing beam arrays in circular arrangements are presented and discussed.