Measurement of L&agr; and Lß X-ray fluorescence cross sections in Er, Ta, W and Au by 16.896–59.543 keV photons

La and Lb X-ray fluorescence cross sections in Er, Ta, W and Au at excitation energies of 16.896, 22.581, 25.770, 32.890, 38.184, 43.949, 50.214 and 59.5 keV were investigated. Measurements were made using a low energy Si(Li) detector coupled to a model 4096 computerized multi-channel analyser. The experimental results were compared with the theoretically calculated values of L X-rays fluorescence cross sections and other experimental results. Good agreement was observed between experimental and theoretical values.     

Colorimetric assay for lysozyme using Micrococcus luteus labeled with a blue dye, Remazol brilliant blue R, as a substrate.

Micrococcus luteus (M. lysodeikticus) labeled with Remazol brilliant blue R (blue ML) was prepared as a novel substrate for the colorimetric assay of lysozyme. The treatment of the labeled substrate with lysozyme resulted in the release of soluble blue products which can be easily measured spectrophotometrically at 600 nm. The blue color was most efficiently released at pH 7 and ionic strength of 0.2 on incubation with hen lysozyme at 40 degrees C. A new colorimetric method for the assay of lysozyme using this substrate was developed. The assay system gave a linear dose-response curve, and as little as 0.1 microgram of human lysozyme (1 microgram/ml, 100 microliters) can be detected. The present method is more convenient and reproducible than the conventional lysozyme assay with bacterial cells. Application of the system to the determination of lysozyme in human serum is described.     

Effects of steric and hydrophobic forces on the rheological properties of ZrO2 suspensions

 The effect of pH on the flow behavior of ZrO₂ suspensions containing polyacrylic and octanoic acids was evaluated. In the flocculated pH regime, the flow behavior is highly shearthinning and can be described by a power-law model. The shear-thinning behavior increases with increasing degree of flocculation. Maximum shearthinning was observed at the zero zeta potential condition. Hydrophobic interaction arising from adsorbed octanoic acid was found to enhance the shear-thinning behavior. No such enhancement was observed for adsorbed polyacrylic acid. It was also illustrated that the viscosity–pH behavior is a mirror image of the yield stress–pH behavior. A quantitative particle-pair interactions model incorporating steric and hydrophobic interactions was proposed to explain the effects of polyacrylic and octanoic acids on the maximum yield stress. Received: 23 May 1997 Accepted: 4 June 1997     

Salting-in of alcohols in aqueous solutions by tetraalkylammonium bromides at the freezing temperature

The freezing-point depression of the ternary systems tetraalkylammonium bromides-t-butanol-water for the first five homologs of R₄NBr was measured. In the case of Bu₄NBr, the effect of size of the alcohol (methahol ton-butanol) was also investigated. From the corresponding freezing-point data for the binary systems the apparent salting constants were calculated. The true salting constantsk _s were obtained by extrapolation to infinite dilution. These are all very close to zero at the freezing temperature. From the corresponding thermochemical data the temperature dependence ofk _s was calculated, and above 5°C all the R₄NBr salts int-butanol; the salting-in increases with temperature and with the size of the hydrophobic cations. The scaled-particle theory is at present the only one which can account semiquantitatively for the temperature dependence of the salting-in effect. On leave of absence from Chemistry Department, The University, Sheffield S3 7HF, England To whom correspondence should be addressed.     

Studies in the chemistry of erythrina alkaloide derivatives—II : Synthesis and stereochemistry of decahydro-3-methyl-6H-pyrido]2,1-i]indole

1,2,3,4,7,7a,8,9,10,11-Decahydro-3-methyl-6$\text{H}$-pyrido[2,1-i]indole was prepared as an example of an erythrinane derivative lacking the aromatic moiety. The stereochemical structure of this compound and its 6-oxo derivative were found to be predominantly cis A/B, trans B/C, axial CH₃ and cis A/B, axial CH₃, respectively.     

Diastereoselective preparation and characterization of ruthenium bis(bipyridine) sulfoxide complexes

A new concept in the synthesis of optically active octahedral ruthenium complexes was realized for the first time when cis- or trans-Ru(bpy)2Cl, (cis- or trans-1) was reacted with either (R)-(+)- or (S)-(-)-methyl p-tolyl sulfoxide (2 or 3); this novel asymmetric synthesis leads to the diastereoselective formation of the ruthenium bis(bipyridine) complex cis-delta-[Ru(bpy)2(2)Cl]Cl (4) (49.6% de) or cis-lambda-[Ru(bpy)2(3)Cl]Cl (5) (48.4% de), respectively. cis- or trans-Ru(dmbpy)2Cl2 (cis- or trans-6) (dmbpy = 4,4'-dimethyl-2,2'-bipyridine) also reacts with 2 or 3, leading to the diastereoselective formation of cis-delta-[Ru(dmbpy)2(2)Cl]Cl (7) (59.5% de) or cis-lambda-[Ru(dmbpy)2(3)Cl]Cl (8) (57.2% de), respectively. The diastereoselectivity of these reactions is governed solely by the chirality of the sulfoxide nucleophile. This represents the first process by which a sigma-bonded ligand occupying only a single coordination site has had such an important influence on the stereochemical outcome of a ruthenium bis(bipyridine) complex formation. These novel complexes were fully characterized by elemental analysis and IR, UV/vis, and 1H, 13C, and 2D NMR spectroscopy. An investigation into the chiroptical properties of these novel ruthenium bis(bipyridine) sulfoxide complexes has been carried out, and circular dichroism spectra are used to assign absolute stereochemistry.     

Synthesis and characterization of hollandite-type material intended for the specific containment of radioactive cesium

The hollandite Ba₁Cs_0.28Fe_0.82Al_1.46Ti_5.72O₁₆, which has been proposed for the cesium-specific conditioning, can be synthesized either by an alcoxyde or a dry route. In both cases, a two-step protocol is applied, i.e., a calcination at 1000 °C followed by a sintering at 1200 °C. After sintering, both synthetic processes lead to a tetragonal form. According to the X-ray diffraction (XRD) patterns collected at the barium and the cesium K absorption edges, the different positions of these two elements have been evidenced with a more centered position in the oxygen cubic site of the tunnel for Ba than for Cs. On the contrary, after calcination, the two synthetic routes yield different products. The alcoxyde route gives rise to a mixture of the aforementioned Cs- and Ba-containing tetragonal I4/m hollandite, a Cs-only-containing monoclinic I2/m hollandite and an unidentified phase with a weak coherence length containing only Ba. The dry route yields a single tetragonal hollandite material containing Ba and Cs slightly different in composition from the targeted compound.     

New adsorbents from oil shales: Preparation, characterization and U, Th isotope adsorption tests

New activated adsorbents for radionuclides have been produced from Moroccan oil shales by pyrolysis of the natural material at 550 °C flowed by a KMnO₄ activation. The texture and composition of the native rock and the adsorbents were studied before their use in tests for adsorption of radionuclides from standard solutions prepared from uranylnitrate and thorium nitrate in equilibrium with their daughters. The distribution coefficients between solutions containing U, Th and Ra and the adsorbents were evaluated by means of specific activities, measured by g-ray spectrometry. The adsorbents were observed to eliminate U, Th, Ra, Ac and Tl from aqueous solutions. This revised version was published online in August 2006 with corrections to the Cover Date.     

Ion solvation by channel carbonyls characterized by 17O solid-state NMR at 21 T

Recently available ultrahigh magnetic fields offer new opportunities for studies of quadrupole nuclei in biological solids because of the dramatic enhancement in sensitivity and resolution associated with the reduction of second-order quadrupole interactions. Here, we present a new approach for understanding the function and energetics of ion solvation in channels using solid-state 17O NMR spectroscopy of single-site 17O-labeled gramicidin A. The chemical shift and quadrupole coupling parameters obtained in powder samples of lyophilized material are similar to those shown in the literature for carbonyl oxygens. In lipid bilayers, it is found that the carbonyl 17O anisotropic chemical shift of Leu10, one of the three carbonyl oxygens contributing to the ion binding site in gramicidin A, is altered by 40 ppm when K+ ion binds to the channel, demonstrating a high sensitivity to such interactions. Moreover, considering the large breadth of the carbonyl 17O chemical shift (>500 ppm), the recording of anisotropic 17O chemical shifts in bilayers aligned with respect to magnetic field B0 offers high-quality structural restraints similar to 15N and 13C anisotropic chemical shifts.     

The sorption behavior of a nickel-insolubilized humic acid system in a column arrangement

The sorption characteristics of insolubilized humic acid (IHA) were investigated for Ni (II) in a column arrangement. The sodium form of the IHA (INaA) was used as a solid phase. Column operations were performed with five steps and all of them were monitored continuously by a flowthrough cell-adapted UV-Vis spectrophotometer. Thus, all solid-phase extraction (SPE) steps were visualized by breakthrough curves and analyses progress were evaluated. However, all calculations and evaluations were focused on the atomic absorption spectrophotometric (AAS) analyses of the solutions collected during the stripping steps. There was a high correlation (r(2), 0.972) between peak area and AAS data of stripping steps. The effect of concentration and pH of the loading solution onto sorption of Ni (II) by INaA was investigated. Sorption characteristics were evaluated by using Freundlich, Langmuir, and Dubinin-Radushkevich (D-R) adsorption isotherms, as well as by Scatchard plot analysis. Multilayer sorption was found to be agreeable for Ni (II). From the D-R isotherm the mean free energy of sorption (E) was calculated (6.65 kJ mol(-1)) and attributed to the multilayer sorption. Finally, the sorption characteristic of the INaA-Ni (II) system was compared with that of the INaA-Cu (II) system, and possible separation of two ions in a binary mixture system is discussed.