Paçäeëeèèe èçotoèob kèeëopoäa pekthÔèkaèèeіі Moëekóëÿphoão kèeëopoäa

Es wurde eine Laboreinrichtung zur kontiniuerlichen Aktivierungsanalyse strömender, Flüssigkeiten entworfen und gebaut. Die Einrichtung bestecht aus dem Vorratsbehälter für die Probelösung, der Aktivierungskammer, einer Pu-Be-Neutronenquelle, der Meβkammer, der Meβeinrichtung, einer Laborpumpe und einem Strömungsmesser. Die vorläufigen Versuche bewiesen, daβ mit der gebauten Einrichtung die Bestimmung von Vanadium, Silber and Kobalt möglich ist.     

A novel approach for strong S-Box generation algorithm design based on chaotic scaled Zhongtang system

Nonlinear Dynamics - Substitution Box (S-Box) is one of the most significant structures used to create an encryption which is strong and resistant against attacks in block encryption algorithms....     

Synthesis and proton conductivity studies of polystyrene‐based triazole functional polymer membranes

In this study, poly(vinylbenzylchloride) (PVBC) was produced by free‐radical polymerization of 4‐vinylbenzylchloride, and then it was functionalized with 3‐amino‐1,2,4‐triazole (ATri) and 1H‐1,2,4‐triazole (Tri). The composition of the polymers was verified by elemental analysis, and the structure was characterized by Fourier transform infrared and ¹³C‐nuclear magnetic resonance spectra. PVBC was modified by ATri with 68% and Tri with 50% yield. The polymers were doped with trifluoromethanesulfonic acid (TA) at various molar ratios, X = 0.5, 1, 2, and 3 with respect to aminotriazole and triazole units. Proton transfer from TA to the triazole rings was proved with Fourier transform infrared spectroscopy. Thermogravimetric analysis showed that the samples are thermally stable up to approximately 200 °C. Differential scanning calorimetry results illustrated the homogeneity of the materials. Under anhydrous conditions, PVBCATri3TA and PVBCTri3TA showed highest proton conductivity of 0.086 and 0.042 S/cm, respectively. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Radioiodination and preliminary biological tests of aniline-mustard and its glucuronide conjugate as a potential anticancer prodrug

Aniline-mustard and its glucuronide conjugate were radioiodinated with ¹³¹I. The preliminary dynamic tests were carried out on rabbits. The scintigrams showed clearly that the glucuronide conjugate of aniline-mustard was very quickly cleared from the metabolism, accumulating in the bladder in about 15 minutes. The clearance time of radioiodinated aniline-mustard-glucuronide was considerably longer (about 45 min.). The results obtained from the biodistributional studies have represented interesting differences between the metabolic details of radioiodinated compounds, and indicated that the glucuronide conjugate of aniline-mustard may be a promising radioiodinated prodrug, if verification of its selective accumulation in some kinds of tumor cells can be obtained.     

Tauberian theorems for Abel limitability method

This paper addresses conditions for the Abel method of limitability to imply convergence and subsequential convergence.      

Theoretical investigation of triazine based a star shape pyrrole monomer

In this work, we report a comprehensive theoretical investigation of electroactive star shaped pyrrole functionalized triazine monomer with two main goals. First goal of this work is to explore the physical and chemical properties of the monomer, then to investigate correlation between the experimental and the theoretical properties of monomer. The scale factor which is calculated from B3LYP/cc-pVDZ was determined as 0.985 for FT-IR and it is an important and reliable contribution to the literature. It is determined that the most appropriate basis set for this molecule. The other novel objective of this research is to investigate temperature effect on displacement of chlorine atoms in 2,4,6-trichloro-1,3,5-triazine. This method applied for the first time in the literature for triazines is especially crucial to the synthesis of unsymmetrical triazines.     

Histidine-epoxy-activated sepharose beads embedded poly (2-hydroxyethyl methacrylate) cryogels for pseudobiospecific adsorption of human immunoglobulin G

The use of highly purified immunoglobulin became among the most powerful adopted strategies in therapeutic trials nowadays. Their role as immunomodulatory and anti-inflammatory agents has widened their scope of use. A novel continuous supermacroporous monolithic cryogels embedded with histidine-epoxy-activated-sepharose beads were synthetized as a new monolithic adsorbents for the separation of immunoglobulin G from human serum. The histidine-epoxy-activated-sepharose beads were embedded into the 2-hydroxyethyl methacrylate (HEMA) cryogels present in frozen aqueous solution inside a plastic syringe. The microstructure morphology of the cryogels was characterized by swelling measurement and scanning electron microscopy. The adsorption of human IgG on the histidine-epoxy-activated-sepharose beads pHEMA cryogels appeared to follow the Langmuir–Freundlich adsorption isotherm model. The maximum IgG adsorption was observed at 4°C and pH 7.4 and was found to be 26.95 mg/g of cryogel which is close to that obtained experimentally (24.49 mg/g). The cryogels were used for several adsorption-desorption cycles without any negligible decrease in their adsorption capacity.     

On the two classes of high‐order convergent methods of approximate inverse preconditioners for solving linear systems

Two classes of methods for approximate matrix inversion with convergence orders p =3?2^k +1 (Class 1) and p =5?2^k ?1 (Class 2), k ≥1 an integer, are given based on matrix multiplication and matrix addition. These methods perform less number of matrix multiplications compared to the known hyperpower method or p th‐order method for the same orders and can be used to construct approximate inverse preconditioners for solving linear systems. Convergence, error, and stability analyses of the proposed classes of methods are provided. Theoretical results are justified with numerical results obtained by using the proposed methods of orders p =7,13 from Class 1 and the methods with orders p =9,19 from Class 2 to obtain polynomial preconditioners for preconditioning the biconjugate gradient (BICG) method for solving well‐ and ill‐posed problems. From the literature, methods with orders p =8,16 belonging to a family developed by the effective representation of the p th‐order method for orders p =2^k , k is integer k ≥1, and other recently given high‐order convergent methods of orders p =6,7,8,12 for approximate matrix inversion are also used to construct polynomial preconditioners for preconditioning the BICG method to solve the considered problems. Numerical comparisons are given to show the applicability, stability, and computational complexity of the proposed methods by paying attention to the asymptotic convergence rates. It is shown that the BICG method converges very quickly when applied to solve the preconditioned system. Therefore, the cost of constructing these preconditioners is amortized if the preconditioner is to be reused over several systems of same coefficient matrix with different right sides.     

Fouling behavior of microstructured hollow fiber membranes in dead-end filtrations: critical flux determination and NMR imaging of particle deposition

The fouling behavior of microstructured hollow fibers was investigated in constant flux filtrations of colloidal silica and sodium alginate. It was observed that the fouling resistance increases faster with structured fibers than with round fibers. Reversibility of structured fibers' fouling was similar during silica filtrations and better in sodium alginate filtrations when compared with round fibers. The deposition of two different silica sols on the membranes was observed by NMR imaging. The sols had different particle size and solution ionic strength and showed different deposition behaviors. For the smaller particle-sized sol in deionized solution (Ludox-TMA), there was more deposition within the grooves of the structured fibers and much less on the fins. For the alkali-stabilized sol Bindzil 9950, which had larger particles, the deposition was homogeneous across the surface of the structured fiber, and the thickness of the deposit was similar to that on the round fiber. This difference between the deposition behavior of the two sols is explained by differences in the back diffusion, which creates concentration polarization layers with different resistances. The Ludox sol formed a thick polarization layer with very low resistance. The Bindzil sol formed a slightly thinner polarization layer; however, its resistance was much higher, of similar magnitude as the intrinsic membrane resistance. This high resistance of the polarization layer during the Bindzil sol filtration is considered to lead to quick flow regulation toward equalizing the resistance along the fiber surface. The Ludox particles were trapped at the bottom of the grooves as a result of reduced back diffusion. The fouling behavior in sodium alginate filtrations was explained by considering the size-dependent deposition within the broad alginate size distribution. The better reversibility of fouling in the structured fibers is thought to be the result of a looser deposit within the grooves, which is more easily removed than a compressed deposit on the round fibers.