应用荧光光谱和径向基函数神经网络定量检测三聚氰胺

实验发现三聚氰胺溶液在紫外光激发下产生较强荧光,测得其荧光峰在310～600 nm之间,荧光峰值波长为420 nm左右,荧光相对强度与三聚氰胺溶液浓度呈现复杂的非线性关系。提出了采用径向基函数神经网络结合荧光光谱对三聚氰胺溶液浓度进行测定的方法。对每个样本选取30个发射波长值所对应的荧光强度作为网络数据,训练、建立了径向基函数神经网络。应用训练好的径向基函数神经网络,对5种三聚氰胺溶液的浓度进行预测,结果相对误差分别为0.93%,0.09%,0.31%,1.55%,4.61%。该方法能快捷、准确地测定三聚氰胺在溶液中的含量,为三聚氰胺检测及食品安全监管提供了一种新方法。     

Measurement of the KLL Dielectronic Recombination Resonances in He-like to C-like Kr Ions

The KLL dielectronic recombination processes of highly charged He-like to C-like Kr ions have been studied experimentally. The measurement was performed on the newly developed Shanghai electron beam ion trap （Shanghai-EBIT） facility. Characteristic x-rays from both dielectronic recombination and radiative recombination are detected as the electron beam energy is scanned through the resonances. The KLL resonant strengths obtained are 5.41×10^-19, 4.33×10^-19, 3.59×10^-19, 2.05×10^-19 and 0.98×10^-19 cm^2 eV for He-like to C-like Kr ions, respectively.     

甲醇分子荧光光谱的研究

采用Roper Scientific SP_2558多功能光谱测量系统对色谱纯甲醇溶液在紫外光激励下产生的荧光光谱进行了实验研究。实验结果表明,甲醇溶液能吸收紫外光并向外发射峰值位于340nm附近的荧光光谱,同时得到了能产生荧光光谱的最长激励光波长的临界值为245nm左右。对甲醇分子发射荧光的机理进行了讨论,给出了与实验结果相一致的理论分析。研究甲醇的荧光光谱可为其作为有机溶剂和催化剂时对其他有机大分子相关光谱的影响提供理论和实验上的参考,并可直接为荧光探针技术的发展提供服务。     

光学条纹相机时间扫描性能应用

对相机全屏扫速性能进行了系统分析,发现基于相机整体的平均扫速及扫速非线性处理扫描时间的传统方法不能反映相机空间畸变现象,并且扫速非线性放大了数据处理不确定度,从而降低了相机应用价值。建立了一套基于全屏扫速及扫速不确定度的扫描时间精细处理方法,它自洽消除了相机的空间畸变和扫速非线性的系统性影响。开展了理论分析和验证实验,结果表明:精细处理方法很容易使扫描时间数据处理相对不确定度降低到1%以内,显著提高了条纹相机时间扫描精度和应用可靠性。     

Positive Semidefinite Rank-Based Correlation Matrix Estimation With Application to Semiparametric Graph Estimation

Many statistical methods gain robustness and flexibility by sacrificing convenient computational structures. In this article, we illustrate this fundamental tradeoff by studying a semiparametric graph estimation problem in high dimensions. We explain how novel computational techniques help to solve this type of problem. In particular, we propose a nonparanormal neighborhood pursuit algorithm to estimate high-dimensional semiparametric graphical models with theoretical guarantees. Moreover, we provide an alternative view to analyze the tradeoff between computational efficiency and statistical error under a smoothing optimization framework. Though this article focuses on the problem of graph estimation, the proposed methodology is widely applicable to other problems with similar structures. We also report thorough experimental results on text, stock, and genomic datasets.     

钇对IMI829钛合金及Ti—14Al—21Nb合金显微组织和性能的影响

采用光学显微镜、扫描电和力学性能测试设备，研究了在ＩＭＩ８２９和Ｔｉ－１４Ａｌ－２１Ｎｂ合金中添加Ｙ，对合金显微组织遥影响。结果表明，在ＩＭＩ８２９和Ｔｉ－１４Ａｌ－２１Ｎｂ合金中添加Ｙ，可以细化这两种合金的组织和晶粒，使ＩＭＩ８２９－０．２Ｙ合金获得良好的室温力学性能和５５０℃蠕变性能，ｗｇｋｑＴｉ－１４Ａｌ－２１Ｎｂ－０．１Ｙ合金的高温力学性能得到改善。     

光学条纹相机时间扫描性能应用

对相机全屏扫速性能进行了系统分析,发现基于相机整体的平均扫速及扫速非线性处理扫描时间的传统方法不能反映相机空间畸变现象,并且扫速非线性放大了数据处理不确定度,从而降低了相机应用价值。建立了一套基于全屏扫速及扫速不确定度的扫描时间精细处理方法,它自洽消除了相机的空间畸变和扫速非线性的系统性影响。开展了理论分析和验证实验,结果表明:精细处理方法很容易使扫描时间数据处理相对不确定度降低到1%以内,显著提高了条纹相机时间扫描精度和应用可靠性。     

Spin-dependent transport induced by magnetization in zigzag graphene nanoribbons coupled to one-dimensional leads

We study spin transport in a zigzag graphene nanoribbon sample with two ferromagnetic strips deposited on the two sides of the ribbon.A tight-binding Hamiltonian was adopted to describe the sample connected to two onedimensional leads.Our theoretical study shows that the resonance peaks of conductance for the spin-up and spin-down electrons are separated for the parallel configuration of the ferromagnetic strips,while they are not separated for the case of antiparallel configuration.This means that giant magnetoresistance can be produced at particular energies by altering the configurations of the ferromagnetic strips,and the device can be designed as a spin filter.     

Flow-induced shear stress and deformation of a core–shell-structured microcapsule in a microchannel

A numerical model was developed and validated to investigate the fluid–structure interactions between fully developed pipe flow and core–shell-structured microcapsule in a microchannel. Different flow rates and microcapsule shell thicknesses were considered. A sixth-order rotational symmetric distribution of von Mises stress over the microcapsule shell can be observed on the microcapsule with a thinner shell configuration, especially at higher flow rate conditions. It is also observed that when being carried along in a fully developed pipe flow, the microcapsule with a thinner shell tends to accumulate stress at a higher rate compared to that with a thicker shell. In general, for the same microcapsule configuration, higher flow velocity would induce a higher stress level over the microcapsule shell. The deformation gradient was used to capture the microcapsule's deformation in the present study. The effect of Young's modulus on the microcapsule shell on the microcapsule deformation was investigated as well. Our findings will shed light on the understanding of the stability of core–shell-structured microcapsule when subjected to flow-induced shear stress in a microfluidic system, enabling a more exquisite control over the breakup dynamics of drug-loaded microcapsule for biomedical applications.     

Preparation of C30 concrete and its adsorption performance for Cs(I)

Journal of Radioanalytical and Nuclear Chemistry - The preparation of C30 concrete for a cavernous waste repository under construction in China and its Cs(I) adsorption performance were...