Determination of ultra trace levels of 1,2-dichloroethane in air by sample enrichment micromachined gas chromatography-differential mobility detection

A novel analytical procedure has been developed for the analysis of ultra trace levels of 1,2-dichloroethane (EDC) in air using sample enrichment in combination with micromachined gas chromatography (GC) and differential mobility detection (DMD). When compared to other contemporary GC techniques, such as GC-flame ionization detection, GC-electron capture detection, or GC-electrolytic conductivity detection, the employment of a DMD in combination with a preconcentrator provided better sensitivity and markedly improved selectivity. The increase in sensitivity reduces false-negative results, while the improvement in selectivity decreases the potential for false-positive results. Using the technique described, a complete analysis can be conducted in less than 10 min, with a detection limit of 0.7 ppb (v/v) of EDC and a short term precision of less than 6%. A correlation coefficient of 0.9988 was obtained over an EDC concentration range from 0.7 ppb to 36.4 ppb (v/v). The analytical system also has an on-board microTCD in series with the DMD, allowing both detector outputs to be monitored simultaneously. With the pre-concentration technique, the microTCD can detect EDC as low as 15 ppb (v/v) with a substantially enhanced linear dynamic range in addition to providing a confirmation means for the presence of EDC at the level cited.     

Simple on-line sample preconcentration technique for peptides based on dynamic pH junction in capillary electrophoresis-mass spectrometry

We report an on-line sample preconcentration technique based on dynamic pH junction in capillary electrophoresis-mass spectrometry (CE-MS). For peptide analysis, the samples were dissolved in a solution with higher pH than the background solution (BGS), and were injected into the capillary as a long plug. The pH difference between the sample matrix and BGS caused changes in analytes' mobilities during electrophoresis, resulting in narrowing of their bands at the boundary. Around 550-1000-fold sensitivity enhancement could be achieved in terms of peak intensity without degrading peak shape and resolution. This technique is easy to perform and will be useful for peptide mass fingerprinting in protein analysis.     

Spiral coils for counter-current chromatography using aqueous polymer two-phase systems

Retention properties of polyethylene glycol-phosphate aqueous two-phase systems in a spiral coil (5 mm I.D.) on Type-J synchronous counter-current chromatographic devices have been compared for the elution mode where the lower phase is the mobile phase and flows from the inside head terminal. This was achieved with the aid of digital imaging under stroboscopic illumination, an image analysis and measurement of the displaced volume of the stationary phase. For the spiral coil, high and stable stationary phase retention at mobile phase flow rates up to 64 ml/min has been obtained. Wave-like disturbance of the interface near the proximal point was observed and analyses have been made for possible use in protein separation.     

Counter-current chromatography separation scaled up from an analytical column to a production column

An analytical separation was performed on an analytical J-type counter-current chromatography (CCC) instrument using a 5.4 ml column, with a 1 ml/min mobile phase flow rate. This separation had a resolution of 0.69 and was achieved in 10 min. The same separation was performed using two 2300 ml columns connected in series at a flow rate of 850 ml/min using a production scale J-type centrifuge. This production scale separation was also obtained in 10 min with a resolution of 0.71. This represents an 850 times increase in productivity. This paper presents these separations and the underlying scale up theory.     

Metabolome analysis by capillary electrophoresis-mass spectrometry

Capillary electrophoresis (CE)-mass spectrometry (MS), as an analytical platform, has made significant contributions in advancing metabolomics research, if still limited up to this time. This review, covering reports published between 1998 and 2006, describes how CE-MS has been used thus far in this field, with the majority of the works dealing with targeted metabolite analyses and only a small fraction using it in the comprehensive context. It also discusses how some of the key features of CE-MS were exploited in selected metabolomic applications.     

Derivatisation using m-(trifluoromethyl)phenyltrimethylammonium hydroxide of organic materials in artworks for analysis by gas chromatography-mass spectrometry: unusual reaction products with alcohols

The quaternary ammonium reagent m-(trifluoromethyl)phenyltrimethylammonium hydroxide (TMTFTH) has gained widespread use for the derivatisation for GCMS analysis of organic materials found in artists' materials, such as oils, plant resins and waxes. This paper discusses products formed from reactions of TMTFTH with alcohols--including fatty alcohols, hydroxyacids, terpenes and glycerol--that have diagnostic value in the analysis of samples from artworks. In addition to methyl ethers, (trifluoromethyl)phenyl ethers were formed to variable degrees from the different types of alcohol. The products were identified from their EI mass spectra. An understanding of these multiple reaction products is important for the interpretation of GCMS data from complex samples, especially in the case of polyfunctional alcohols such as glycerol, which forms a number of methyl, (trifluoromethyl)phenyl and mixed ethers. The significance of the reaction products, and the relative advantages of TMTFTH as compared to alternative ammonium and sulfonium methylating reagents, are discussed.     

Study of electron transfer in ferrocene-labeled collagen-like peptides

This study describes the electron transfer (ET) phenomenon through a series of (Pro-Hyp-Gly) repeat units containing collagen mimics. The peptides contain redox-active ferrocene (Fc) and thiol-functionalized cystein (Cys) at the N- and C-terminals, respectively. Peptide films were prepared on gold surfaces and characterized by X-ray photoelectron spectroscopy (XPS), ellipsometry, and Fourier transform-reflection absorption infrared spectroscopy (FT-RAIRS). Electrochemical investigations of the films showed a linear but weakly distance-dependent ET. The importance of H-bonding was realized, and the possibility of a conformationally gated ET mechanism has been discussed.     

Advantages of a small-volume counter-current chromatography column

Counter-current chromatography (CCC) works with a support-free liquid stationary phase. This allows for preparative separations and purifications. However, there are serious technical constraints because of the need to keep a liquid stationary phase in a column. Centrifugal fields are used. A new commercial hydrodynamic 18 mL column made with a narrow-bore 0.8 mm Teflon tubing was evaluated by comparing it with older hydrodynamic CCC columns and a similar 19 mL column but made with 1.6 mm Teflon tubing. A small-volume CCC column allows for reliable and fast solute partition coefficient determination. When resolution is required, both high efficiency and liquid stationary phase retention are needed. Unfortunately, these two requirements bear technical contradictions. A column coiled with a narrow tubing bore will provide a high chromatographic efficiency while a column containing wider tubing bore will achieve higher stationary phase retention. In all cases, increasing the magnitude of the centrifugal field also increases the stationary phase retention. The solution is to build centrifuges able to produce high fields that will provide acceptable liquid phase retention with narrow-bore tubes. The new 18 mL 0.8 mm tubing bore column is able to rotate as fast as 2100 rpm generating a 240 × g field. The two older CCC columns cannot compete with the new one. However, the small 19 mL column with 1.6 mm bore tubing can be useful when fast results are desired without top resolution.     

Optimising resolution for a preparative separation of Chinese herbal medicine using a surrogate model sample system

This paper builds on previous modelling research with short single layer columns to develop rapid methods for optimising high-performance counter-current chromatography at constant stationary phase retention. Benzyl alcohol and p-cresol are used as model compounds to rapidly optimise first flow and then rotational speed operating conditions at a preparative scale with long columns for a given phase system using a Dynamic Extractions Midi-DE centrifuge. The transfer to a high value extract such as the crude ethanol extract of Chinese herbal medicine Millettia pachycarpa Benth. is then demonstrated and validated using the same phase system. The results show that constant stationary phase modelling of flow and speed with long multilayer columns works well as a cheap, quick and effective method of optimising operating conditions for the chosen phase system—hexane–ethyl acetate–methanol–water (1:0.8:1:0.6, v/v). Optimum conditions for resolution were a flow of 20 ml/min and speed of 1200 rpm, but for throughput were 80 ml/min at the same speed. The results show that 80 ml/min gave the best throughputs for tephrosin (518 mg/h), pyranoisoflavone (47.2 mg/h) and dehydrodeguelin (10.4 mg/h), whereas for deguelin (100.5 mg/h), the best flow rate was 40 ml/min.     

Intermittent counter-current extraction as an alternative approach to purification of Chinese herbal medicine

This paper describes intermittent counter-current extraction, a novel method of using a conventional twin column counter-current chromatograph to either split a sample into two groups of compounds or extract and enrich a target compound from a crude extract. The first method is demonstrated by splitting a model mixture of four compounds into two groups. The second method is demonstrated by the extraction and enrichment of a high value target compound, triptolide, from a Chinese herbal medicine crude extract of Tripterygium wilfordii Hook. f., where it is found at low concentration (2%). This was achieved by retaining and enriching the target compound within the column while washing away all other components of the crude material. The success of the first method allowed the second method to be carried out without the need for costly preliminary experiments with the high value sample. 188 mg of triptolide at greater than 98% purity was separated from 9.2 g of crude extract, using 10 l of solvent in a 3-h separation.