Determination of selenium in human serum by liquid chromatography/electron capture atmospheric pressure chemical ionization mass spectrometry after acid digestion and derivatization using 2,3-diaminonaphthalene

Analysis of selenium in biological samples is very important and numerous analytical methods for the element have been developed. One of the most convenient and widely used methods for routine determination of serum selenium is a fluorometric method using 2,3-diaminonaphthalene (DAN); however, this method lacks specificity. We observed that 4,5-benzopiazselenol (BPS), a selenium derivative of DAN, is ionized with electron capture in an atmospheric pressure chemical ionization (APCI) interface, and subsequently established a method for determining total human serum selenium by means of liquid chromatography/atmospheric pressure chemical ionization mass spectrometry. All pretreatment procedures were carried out in a single test tube to minimize selenium loss. The recovery of organic or inorganic selenium spiked to human serum was 97-103%.The detection limit of BPS was equivalent to 0.2 ng of selenium and the lower quantitative limit of serum selenium was 10 ng mL(-1). The coefficient of variation of standard concentrations in control serum samples was 4.5%. The purity of the observed peak obtained from serum samples was confirmed using the ion cluster technique.     

Molecular Origin for the Thermal Stability of Rice Amylopectin 1

Abstract

The non-Newtonian behavior and dynamic viscoelasticity of Takanari and Reimei amylopectin solutions were measured with a rheogoniometer. The Takanari and Reimei amylopectin showed plastic behavior at a concentration above 2.0% at 25 °C. The viscosity of Takanari amylopectin decreased a little with increasing temperature at 2.0%. However, a little increase in the viscosity was observed with increasing temperature from 0 to 15 °C, then it stayed at a constant value with further increase in the temperature up to 80 °C at a concentration above 4.0%. An increase in the viscosity was also observed in Reimei amylopectin solution at various concentrations. The dynamic viscoelasticity of Takanari amylopectin increased with increasing concentration at low temperature (0 °C) and it stayed at a constant value with increasing temperature up to 80 °C. On the other hand, dynamic viscoelasticity for Reimei amylopectin showed a weak sigmoid curve. The tan δ of both amylopectins showed low values, 0.32-0.38, at low temperature range and kept constant with increasing temperature up to 80 °C. A little decrease of dynamic modulus of Takanari and Reimei amylopectin was observed upon addition of urea (4.0 M). The dynamic modulus of Takanari and Reimei amylopectin solution decreased rapidly when the temperature reached 45 and 60 °C, which was estimated to be a transition temperature, in 0.10 N NaOH solution. The molecular origin for the thermal stability of rice amylopectin (Takanari and Reimei) was essentially attributed to intramolecular associations in aqueous solution. Possible mode of intramolecular hydrogen bonding and van der Waals forces of attraction of amylopectin molecules are proposed.

     

Size control of phase‐separated liquid crystal droplets in a polymer matrix based on the phase diagram

When a mixture of liquid crystal (LC) and photo reactive monomer is irradiated by UV light, polymerization occurs and LC droplets form through phase separation, producing polymer dispersed LCs (PDLCs). Although size control of LC droplets and reduced amounts of LC in PDLC films are important in applications, precise size control of LC droplets at a low LC fraction has not yet been accomplished. In this study, the phase diagrams of the LC/initial monomer and the LC/polymer during polymerization were used to control LC droplet size at various LC fractions. Both the relative position of the sample in the initial phase diagram and the shift of the phase separation line during polymerization were shown to be important in determining the size of LC droplets. Our results are expected to provide a new strategy for precise size control of LC droplets especially at a low LC fraction range, which would be a great help for PDLC applications. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

A novel derivatization reagent possessing a bromoquinolinium structure for biological carboxylic acids in HPLC‐ESI‐MS/MS

A novel bromoquinolinium reagent, i.e. 1‐(3‐aminopropyl)‐3‐bromoquinolinium bromide (APBQ), was synthesized for the analysis of carboxylic acids. A simple and practical precolumn derivatization procedure using the APBQ in RP chromatography and MS (HPLC‐MS) has been developed using bile acids and free fatty acids, as the representative carboxylic acids in biological samples. The APBQ efficiently reacted with carboxylic acids at 60°C for 60 min in the presence of N,N‐dicyclohexylcarbodiimide and pyridine as the activation reagents. Because the APBQ possesses a bromine atom in the structure, the identification of a series of carboxylic acids was easily achieved due to the characteristic bromine isotope pattern in the mass spectra. The APBQ also has a quaternary amine structure, thus the positively charged derivatives are predominate for the highly sensitive detection of carboxylic acids. The APBQ was successfully applied to the selective determination of biological carboxylic acids in human plasma. The bile acids (chenodeoxycholic acid and deoxycholic acid) and several saturated (stearic acid and palmitic acid) and unsaturated free fatty acids (oleic acid and linoleic acid) were reasonably determined by HPLC‐MS under the proposed procedure. Based on the results of analyses of human plasma and saliva, the proposed procedure using APBQ seems to be applicable for the qualitative and quantitative analyses of a series of carboxylic acids in biological samples.     

Methanolysis of Dimethyl (1-Diazo-2-oxopropyl) Phosphonate: Generation of Dimethyl (Diazomethyl) Phosphonate and Reaction with Carbonyl Compounds

Dimethyl (1-diazo-2-oxopropyl) phosphonate (3) was transformed to dimethyl (diazomethyl)—phosphonate (4), which was used for the synthesis of enol ether or alkyne without isolation.     

Selective hydrogen peroxide oxidation of sulfides to sulfoxides or sulfones with MWW-type titanosilicate zeolite catalyst under organic solvent-free conditions

Selective oxidation of sulfides to sulfoxides and sulfones with hydrogen peroxide under organic solvent-free conditions was demonstrated by the MWW-type titanosilicate zeolite catalyst. Sulfides were oxidized smoothly to give sulfoxides with good selectivities at ambient temperature using 1.0–1.2 equiv of hydrogen peroxide with the MWW-type titanosilicate zeolite catalyst. Especially, the Ti-MWW with an interlayer-expanded structure (Ti-IEZ-MWW) catalyst showed high activity with good chemoselectivity for the oxidation of various sulfides. The catalyst is recyclable for at least five cycles, and the only byproduct is water. Sulfides were directly oxidized to give sulfones in high yields by 2.5 equiv of hydrogen peroxide with the MWW-type titanosilicate zeolite catalyst under organic solvent-free conditions.     

Fast multipole method for three-dimensional systems with periodic boundary condition in two directions

We derived a new expression for the electrostatic interaction of three-dimensional charge-neutral systems with two-dimensional periodic boundary conditions (slab geometry) using a fast multipole method (FMM). Contributions from all the image cells are expressed as a sum of real and reciprocal space terms, and a self-interaction term. The reciprocal space contribution consists of two parts: zero and nonzero terms of the absolute value of the reciprocal lattice vector. To test the new expressions, electrostatic interactions were calculated for a randomly placed charge distribution in a cubic box and liquid water produced by molecular dynamics calculation. The accuracy could be controlled by the degree of expansion of the FMM. In the present expression, the computational complexity of the electrostatic interaction of N-particle systems is order N, which is superior to that of the conventional two-dimensional periodic Ewald method for a slab geometry and the particle mesh Ewald method with a large empty space at an interface of the unit cell. © 2020 Wiley Periodicals, Inc.     

A Dual-Ligand Porous Coordination Polymer Chemiresistor with Modulated Conductivity and Porosity

Single-ligand-based electronically conductive porous coordination polymers/metal–organic frameworks (EC-PCPs/MOFs) fail to meet the requirements of numerous electronic applications owing to their limited tunability in terms of both conductivity and topology. In this study, a new 2D π-conjugated EC-MOF containing copper units with mixed trigonal ligands was developed: Cu₃(HHTP)(THQ) (HHTP=2,3,6,7,10,11-hexahydrotriphenylene, THQ=tetrahydroxy-1,4-quinone). The modulated conductivity (σ≈2.53×10⁻⁵ S cm⁻¹ with an activation energy of 0.30 eV) and high porosity (ca. 441.2 m² g⁻¹) of the Cu₃(HHTP)(THQ) semiconductive nanowires provided an appropriate resistance baseline and highly accessible areas for the development of an excellent chemiresistive gas sensor.     

Macrocyclic Metal Complexes Bearing Rigid Polyaromatic Ligands: Synthesis and Catalytic Activity

We synthesised palladium and platinum complexes possessing cyclic and acyclic pincer‐type polyaromatic ligands and investigated their structural effect on the catalysis. The pincer‐type bis(6‐arylpyridin‐2‐yl)benzene skeleton was constructed via Kröhnke pyridine synthesis under transition metal‐free conditions on gram‐scale quantity. Ligand structure significantly influenced catalytic activity toward the platinum‐catalysed hydrosilylation of diphenyl acetylenes, despite the ligand‐independence of the conformations and electronic properties of these complexes.