Adsorption of a few heavy metals on natural and modified kaolinite and montmorillonite: a review

The feasibility of using two important and common clay minerals, kaolinite and montmorillonite, as adsorbents for removal of toxic heavy metals has been reviewed. A good number of works have been reported where the modifications of these natural clays were done to carry the adsorption of metals from aqueous solutions. The modification was predominantly done by pillaring with various polyoxy cations of Zr4+, Al3+, Si4+, Ti4+, Fe3+, Cr3+or Ga3+, etc. Preparation of pillared clays with quaternary ammonium cations, namely, tetramethylammonium-, tetramethylphosphonium- and trimethyl-phenylammonium-, N'-didodecyl-N, N'-tetramethylethanediammonium, etc, are also common. Moreover, the acid treatment of clays often boosted their adsorption capacities. The adsorption of toxic metals, viz., As, Cd, Cr, Co, Cu, Fe, Pb, Mn, Ni, Zn, etc., have been studied predominantly. Montmorillonite and its modified forms have much higher metal adsorption capacity compared to that of kaolinite as well as modified-kaolinite.     

Preparation and properties of nanocomposites based on acrylonitrile–butadiene rubber,styrene–butadiene rubber,and polybutadiene rubber

Nanocomposites were prepared with different grades of nitrile rubber with acrylonitrile contents of 19, 34, and 50%, with styrene–butadiene rubber (23% styrene content), and with polybutadiene rubber with Na‐montmorillonite clay. The clay was modified with stearyl amine and was characterized by X‐ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, and transmission electron microscopy (TEM). The XRD studies showed an increase in the gallery gap upon the modification of the filler by stearyl amine. The intercalation of the amine chains into the clay gallery gap was confirmed by the presence of some extra peaks (2928, 2846, and 1553 cm^?1) in the FTIR spectra. The clay–rubber nanocomposites were characterized by TEM and XRD. The mechanical properties were studied for all the compositions. An improvement in the mechanical properties with the degree of filler loading up to a certain level was observed. The changes in the mechanical properties, with changes in the nature and polarity of the rubbers, were explained with the help of XRD and TEM results. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1573–1585, 2004     

Nanocrystalline hydroxyapatite: micelle templated synthesis and characterization

Nanocrystalline calcium phosphate based inorganic, hydroxyapatite (HAp), was synthesized using the dodecyl phosphate micelle system. The surfactant concentration during synthesis played an important role on the final properties of these HAp nanoparticles. A surfactant concentration close to the critical micelle concentration produced the nanoparticles with the highest surface area, with porous less agglomerated morphology. Compacts made of these nanopowders showed between 97 and 98% theoretical density of phase-pure HAp and promoted cell-material interaction when cytotoxicity tests were performed.     

Homogeneous catalytic hydrogenation of liquid carboxylated nitrile rubber

Homogeneous catalytic hydrogenation of olefinic bonds in liquid carboxylated nitrile rubber (L-XNBR) has been carried out selectively in the presence of nitrile and carboxyl functionality using a six-membered cyclopalladate complex of 2-benzoyl pyridine as catalyst. The degree of hydrogenation has been calculated from IR and NMR spectroscopic studies. For example, 68% hydrogenation has been obtained for a sample (containing 0.057 carboxyl equivalent/100 g and 26.1% acrylonitrile) under 2.7 MPa hydrogenation pressure, 0.18 mmol/L catalyst, at 333 K for 1 h in acetone solution. The overall extent of hydrogenation depends on the catalyst-to-double-bond ratio. The kinetics of hydrogenation of L-XNBR has been investigated. The reaction exhibits a pseudo-first order dependence on the concentration of the substrate. The rate constant of the reaction is reduced by the increase in carboxyl and nitrile content of the polymer. The effect of temperature on reaction kinetics has also been studied and the activation energy of hydrogenation of L-XNBR is 20.2 kJ/mol. Intrinsic viscosity of the polymer remains unchanged during the reaction. A significant lowering of the glass transition temperature and improvement of thermal stability have been observed on hydrogenation. © 1992 John Wiley & Sons, Inc.     

Preparation of hydrogenated nitrile rubber using palladium acetate catalyst: Its characterization and kinetics

Hydrogenated nitrile rubber was prepared by using palladium acetate as the homogeneous catalyst system. The effect of different reaction parameters on the level of hydrogenation was studied. The extent of hydrogenation increased with increase in reaction time, temperature, pressure, and catalyst concentration. A maximum conversion of 96% could be achieved. The degree of hydrogenation was estimated from IR and NMR spectroscopy. The selectivity of the catalyst in reducing ? C?C? in presence of ? C?N was supported by IR and ¹³C-NMR spectra. ESCA studies further confirmed this observation. Properties of hydrogenated nitrile rubber were investigated by various techniques such as gel permeation chromatography (GPC), glass transition temperature (T_g), stress-strain behavior and rheological measurements. GPC studies showed no significant change in molecular weights of the products after the reaction. T_g value decreased with an increase in the level of hydrogenation. The ultimate stress improved significantly with the increase in the extent of hydrogenation. The die swell decreased with hydrogenation at a particular shear rate. The kinetics of the NBR hydrogenation were investigated. With the increase of the hydrogen pressure and catalyst concentration, the rate of the reaction increased. The reaction was apparently first order with respect to olefinic substrate at higher hydrogen pressure. The apparent activation energy, enthalpy, and entropy of the reaction were calculated as 29.9 kJ/mol, 27.42 kJ/mol, and –0.20 kJ mol^?1 K^?1, respectively.     

Mössbauer and magnetic studies of MFe2O4(M = Co, Ni) nanoparticles

Nanocrystalline MFe₂O₄ (M?=?Co, Ni) particles are synthesized by citrate precursor technique. Mössbauer and magnetic studies are carried out with the CoFe₂O₄ samples having particle sizes of 9, 14 and 30 nm and the NiFe₂O₄ samples having particle sizes of 9, 21 and 30 nm. The intrinsic magnetic parameters are found to vary with the particle size. The magnetic interactions and cation distribution present in these systems influence the room temperature Mössbauer parameters. Ferrimagnetic sextets are observed for all the different particle sizes. The observed reduction of the magnetic hyperfine field values with the decrease in the size of MFe₂O₄ particles are attributed to the intrinsic size effect and the canted spin structure at the surface of the nanoparticles.     

Unique rheological behavior of rubber based nanocomposites

Montmorillonite clay (N) based nanocomposites were prepared using three different grades of acrylonitrile butadiene rubber (NBR) (19%, 34%, and 50% acrylonitrile contents), styrene butadiene rubber (SBR), and polybutadiene rubber (BR). Rheological study was carried out on these nanocomposites at three different temperatures (110 °C, 120 °C, and 130 °C) over a range of shear rates for comparison. The results showed that the shear viscosity decreased with increasing shear rate and incorporation of the unmodified (N) and the modified (OC) fillers up to a certain loading, when the results were compared with the gum rubber. This effect became more prominent with increasing polarity of the rubber. The die swell, on the other hand, decreased with loading of N and OC. With increasing filler volume fraction, the die swell further decreased. Decrease of viscosity with concomitant decrease of die swell is unique in such systems. Consecutive runs of the same sample over different shear rates increased the viscosity. The results were explained with the help of X‐Ray Diffraction (XRD) data and Transmission Electron Microscopy (TEM).© 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1854–1864, 2005     

Synthesis and time-resolved photoluminescence spectroscopy of capped CdS nanocrystals

Here, we report the synthesis of colloidal CdS nanoparticles by capping with starch, phenol and pyridine. We also study the photophysical properties of CdS nanoparticles by steady state and time-resolved photoluminescence spectroscopy. The experimental results show that the relaxation of the excited state of CdS nanoparticles is composed of two different components. Our analysis suggests that the fast and slow components decay times of these capped CdS nanocrystals are due to trapping of carriers in surface state and e–h radiative recombination processes, respectively.     

Solvent density mode instability in non-polar solutions

We analyse the origin of the multiple long time scales associated with the long time decay observed in non-polar solvation dynamics by linear stability analysis of solvent density modes where the effects of compressibility and solvent structure are systematically incorporated. The coupling of the solute-solvent interactions at both ground and excited states of the solute with the compressibility and solvent structure is found to have important effects on the time scales. The present theory suggests that the relatively longer time constant is controlled by the solvent compressibility, while the solvent structure at the nearest-neighbour length scale dominates the shorter time constant.      

Understanding the role of particle size on photophysical properties of CdS:Eu nanocrystals

Here, we report the role of particle size on the photoluminescence (PL) properties of CdS:Eu³⁺ nanocrystals by steady-state and time-resolved PL spectroscopy. It is found that the average decay time 〈τ〉 of undoped CdS nanocrystals increases with increasing the size. The fast component (nanosecond) is assigned due to trapping and slow component (above 10 ns) is due to defect-related emission. The decrease of fast component from 6.6 to 1.32 ns and the slow component from 20 to 14.6 ns of CdS (host) is observed in presence of Eu ions, indicating that the energy transfer occurs from CdS nanoparticles to Eu³⁺ ions. The decay time of Eu³⁺ in CdS shows two decay components (microsecond scale) and we believe that the fast component is attributed to surface-bound Eu³⁺ ions and slow component is due to lattice-bound Eu³⁺ ions. Analysis suggests that PL efficiency of Eu³⁺ ions depends on size of nanoparticles.