Steady State of Stochastic Sandpile Models

We study the steady state of the Abelian sandpile models with stochastic toppling rules. The particle addition operators commute with each other, but in general these operators need not be diagonalizable. We use their Abelian algebra to determine their eigenvalues, and the Jordan block structure. These are then used to determine the probability of different configurations in the steady state. We illustrate this procedure by explicitly determining the numerically exact steady state for a one dimensional example, for systems of size ≤12, and also study the density profile in the steady state.     

Synthesis and characterization of 2D transition metal dichalcogenides: Recent progress from a vacuum surface science perspective

Layered transition metal dichalcogenides (TMDs) are a diverse group of materials whose properties vary from semiconducting to metallic with a variety of many body phenomena, ranging from charge density wave (CDW), superconductivity, to Mott-insulators. Recent interest in topologically protected states revealed also that some TMDs host bulk Dirac- or Wyle-semimetallic states and their corresponding surface states. In this review, we focus on the synthesis of TMDs by vacuum processes, such as molecular beam epitaxy (MBE). After an introduction of these preparation methods and categorize the basic electronic properties of TMDs, we address the characterization of vacuum synthesized materials in their ultrathin limit-mainly as a single monolayer material. Scanning tunneling microscopy and angle resolved photoemission spectroscopy has revealed detailed information on how monolayers differ in their properties from multi-layer and bulk materials. The status of monolayer properties is given for the TMDs, where data are available. Distinct modifications of monolayer properties compared to their bulk counterparts are highlighted. This includes the well-known transition from indirect to direct band gap in semiconducting group VI-B TMDs as the material-thickness is reduced to a single molecular layer. In addition, we discuss the new or modified CDW states in monolayer VSe₂ and TiTe₂, a Mott-insulating state in monolayer 1T-TaSe₂, and the monolayer specific 2D topological insulator 1T′-WTe₂, which gives rise to a quantum spin Hall insulator. New structural phases, that do not exist in the bulk, may be synthesized in the monolayer by MBE. These phases have special properties, including the Mott insulator 1T-NbSe₂, the 2D topological insulators of 1T′-MoTe₂, and the CDW material 1T-VTe₂. After discussing the pure TMDs, we report the properties of nanostructured or modified TMDs. Edges and mirror twin grain boundaries (MTBs) in 2D materials are 1D structures. In group VI-B semiconductors, these 1D structures may be metallic and their properties obey Tomonaga Luttinger quantum liquid behavior. Formation of Mo-rich MTBs in Mo-dichalcogenides and self-intercalation in between TMD-layers are discussed as potential compositional variants that may occur during MBE synthesis of TMDs or may be induced intentionally during post-growth modifications. In addition to compositional modifications, phase switching and control, in particular between the 1H and 1T (or 1T′) phases, is a recurring theme in TMDs. Methods of phase control by tuning growth conditions or by post-growth modifications, e.g. by electron doping, are discussed. The properties of heterostructures of TMD monolayers are also introduced, with a focus on lateral electronic modifications in the moiré-structures of group VI-B TMDs. The lateral potential induced in the moiré structures forms the basis of the currently debated moiré-excitons. Finally, we review a few cases of molecular adsorption on nanostructured monolayer TMDs. This review is intended to present a comprehensive overview of vacuum studies of fundamental materials' properties of TMDs and should complement the investigations on TMDs prepared by exfoliation or chemical vapor deposition and their applications.     

Trapping a Silicon(I) Radical with Carbenes: A Cationic cAAC–Silicon(I) Radical and an NHC–Parent-Silyliumylidene Cation

The trapping of a silicon(I) radical with N-heterocyclic carbenes is described. The reaction of the cyclic (alkyl)(amino) carbene [cAAC_Me] (cAAC_Me=:C(CMe₂)₂(CH₂)NAr, Ar=2,6-iPr₂C₆H₃) with H₂SiI₂ in a 3:1 molar ratio in DME afforded a mixture of the separated ion pair [(cAAC_Me)₂Si:^.]⁺I⁻ ( 1 ), which features a cationic cAAC–silicon(I) radical, and [cAAC_Me−H]⁺I⁻. In addition, the reaction of the NHC–iodosilicon(I) dimer [I_Ar(I)Si:]₂ (I_Ar=:C{N(Ar)CH}₂) with 4 equiv of I_Me (:C{N(Me)CMe}₂), which proceeded through the formation of a silicon(I) radical intermediate, afforded [(I_Me)₂SiH]⁺I⁻ ( 2 ) comprising the first NHC–parent-silyliumylidene cation. Its further reaction with fluorobenzene afforded the C_Ar−H bond activation product [1-F-2-I_Me-C₆H₄]⁺I⁻ ( 3 ). The isolation of 2 and 3 confirmed the reaction mechanism for the formation of 1 . Compounds 1 – 3 were analyzed by EPR and NMR spectroscopy, DFT calculations, and X-ray crystallography.     

MRDCI study of the low-lying electronic states of PbSi

Electronic states of the PbSi molecule up to 4 eV have been studied by carrying out ab initio based MRDCI calculations which include relativistic effective core potentials (RECPs) of both the atoms. The use of semicore RECPs of Pb produces better dissociation limits than the full-core one. However, the (3)P(0)-(3)P(1) splitting due to Pb is underestimated by about 4000 cm(-1). At least 25 bound electronic states of the Λ-S symmetry are predicted for PbSi. The computed zero-field-splitting in the ground state is about 544 cm(-1). A strong spin-orbit mixing changes the nature of the potential energy curves of many Ω states. The overall splitting among the spin components of A(3)Π is computed to be 4067 cm(-1). However, the largest spin-orbit splitting is reported for the (3)Δ state. A number of spin-allowed and spin-forbidden transitions are predicted. The partial radiative lifetime for the A(3)Π-X(3)Σ(-) transition is of the order of milliseconds. The computed bond energy in the ground state is 1.68 eV, considering the spin-orbit coupling. The vertical ionization energy for the ionization to the X(4)Σ(-) ground state of PbSi(+) is about 6.93 eV computed at the same level of calculations.     

Preparation and photoluminescence properties of Y2SiO5:Eu3+ nanocrystals

The sol-emulsion-gel method is used for the preparation of about 5-7 nm size Eu2O3 doped and coated Y2SiO5 nanoparticles at 1300 degrees C. Here, we report the role of surface coating, dopant concentration and temperature of heating on the modification of crystal structure and the photoluminescence properties of Y2SiO5:Eu3+ nanocrystals. It is found that photoluminescence properties are sensitive to the crystal structure which is again controlled by surface coating, concentration and heating temperature. The decay times are 0.76, 1.14, 1.23 and 1.40 ms for 0.25, 0.5, 1.0 and 2.5 mol% Eu2O3 doped Y2SiO5 nanocrystals prepared at 1100 degrees C (X1-Y2SiO5). However, in X2-Y2SiO5 crystal phase (at 1300 degrees C) the average decay times are 1.05, 1.35, 1.55 and 1.60 ms for 0.25, 0.5, 1.0 and 2.5 mol% Eu2O3 doped Y2SiO5 nanocrystals, indicating the photoluminescence properties depend on both the crystal structure and the concentration of ions. The emission intensity of the peak at 612 nm (5D0-->7F2) of the Eu3+-ions is found to be sensitive to the doping and surface coating of Y2SiO5 nanocrystals. The decay times are 1.55 and 1.70 ms for 1300 degrees C heated 1.0 mol% Eu2O3 doped and coated Y2SiO5 nanocrystals, respectively. Our analysis suggests that the site symmetry of ions plays a most important role in the modification of radiative relaxation mechanisms and as a result on the overall photoluminescence properties.     

Microscopic and Spectroscopic Methods Applied to the Measurements of Nanoparticles in the Environment

Abstract: Currently, thousands of commercially available products contain engineered nanoparticles (ENPs). Because numerous nanoparticles (NPs) are being used in products that will be in contact with water or directly used in water treatment processes, these materials will undoubtedly reside, at least temporarily, in bodies of water. Given the widespread use of NPs and ENPs in consumer goods, a large portion of these materials will soon go into the waste stream, potentially to soil and sediments or added directly to agricultural lands via biosolids. Possible impacts of ENPs on aquatic and terrestrial ecosystems are of great concern. Preliminary data from several research groups have shown that ENPs may have a direct impact on food safety and the food chain. However, our knowledge about detection and characterization of NPs in the environment, especially aquatic environments, is still in its infancy. This review includes the most recent literature about the methods applied to the measurement of NPs and ENPs in the environment. The review covers methods to determine size distribution, shape, structure, surface charge, chemical composition, surface area, agglomeration, surface chemistry, porosity, and solubility.     

Bifunctional, chemically patterned flat stamps for microcontact printing of polar inks

Different methods to create chemically patterned, flat PDMS stamps with two different chemical functionalities were compared. The best method for making such stamps, functionalized with 1H,1H,2H,2H-perfluorodecyltrichlorosilane (PFDTS) and 3-(aminopropyl)triethoxysilane (APTS), appeared to be full functionalization of a freshly oxidized flat PDMS stamp with either adsorbate, followed by renewed oxidation through a mask and attachment of the other adsorbate. These stamps were used to transfer polar inks (a thioether-functionalized dendrimer and a fluorescent dye) by microcontact printing. The PFDTS monolayer was used as a barrier against ink transfer, while the APTS SAM areas functioned as an ink reservoir for polar inks. The printing results confirmed the excellent transfer of hydrophilic inks with these stamps to gold and glass substrates, even from aqueous solutions. Attachment of a fluorescent dye on the amino-functionalized regions shows the possibility of the further modification of the chemically patterned stamps for tailoring of the stamps' properties.     

Spectroscopic probing of bile salt-albumin interaction

Interaction of the bile salts, sodium cholate and sodium deoxy cholate with albumin has been probed by fluorescence and circular dichroism studies. Both covalently and non-covalently labeled protein have been used to follow the aggregation of bile salts in presence of protein and to study bile salt-protein interactions in general. Time resolved studies, in agreement with steady-state fluorescence and circular dichroism studies, indicate alteration of protein secondary structure due to positive co-operative effects in bile salt binding to protein. These studies also indicate that covalent labeling may not always be good for studying proteins as it causes alteration of protein secondary structure.     

A Halogen-Bond-Driven Artificial Chloride-Selective Channel Constructed from 5-Iodoisophthalamide-based Molecules

Despite considerable emphasis on advancing artificial ion channels, progress is constrained by the limited availability of small molecules with the necessary attributes of self-assembly and ion selectivity. In this study, a library of small molecules based on 5-haloisophthalamide and a non-halogenated isophthalamide were examined for their ion transport properties across the lipid bilayer membranes, and the finding demonstrates that the di-hexyl-substituted 5-iodoisophthalamide derivative exhibits the highest level of activity. Furthermore, it was established that the highest active compound facilitates the selective chloride transport that occurs via an antiport-mediated mechanism. The crystal structure of the compound unveils a distinctive self-assembly of molecules, forming a zig-zag channel pore that is well-suited for the permeation of anions. Planar bilayer conductance measurements proved the formation of chloride selective channels. A molecular dynamics simulation study, relying on the self-assembled component derived from the crystal structure, affirmed the paramount significance of intermolecular hydrogen bonding in the formation of supramolecular barrel-rosette structures that span the bilayer. Furthermore, it was demonstrated that the transport of chloride across the lipid bilayer membrane is facilitated by the synergistic effects of halogen bonding and hydrogen bonding within the channel.     

Laser surface modification of Al–4Cu–1Mg alloy for enhanced thermal conductivity

The feasibility of enhancing thermal conductivity of Al–4Cu–1Mg alloy by depositing 80Cu–20Mo coating using high-power lasers has been examined. Coatings of 667±2.5 μm thickness were formed with metallurgically sound interface. Results showed an 86% increase in the thermal conductivity of Al–4Cu–1Mg alloy due to laser-deposited 80Cu–20Mo alloy coating. This coating approach can potentially be used on low coefficient of thermal expansion metal matrix composites to enhance their thermal conductivity in electronic devices.