A High Pressure Operando Spectroscopy Examination of Bimetal Interactions in ‘Metal Efficient’ Palladium/In2O3/Al2O3 Catalysts for CO2 Hydrogenation

CO₂ hydrogenation to methanol has the potential to serve as a sustainable route to a wide variety of hydrocarbons, fuels and plastics in the quest for net zero. Synergistic Pd/In₂O₃ (Palldium on Indium Oxide) catalysts show high CO₂ conversion and methanol selectivity, enhancing methanol yield. The identity of the optimal active site for this reaction is unclear, either as a Pd−In alloy, proximate metals, or distinct sites. In this work, we demonstrate that metal-efficient Pd/In₂O₃ species dispersed on Al₂O₃ can match the performance of pure Pd/In₂O₃ systems. Further, we follow the evolution of both Pd and In sites, and surface species, under operando reaction conditions using X-ray Absorption Spectroscpy (XAS) and infrared (IR) spectroscopy. In doing so, we can determine both the nature of the active sites and the influence on the catalytic mechanism.     

Determination of aliphatic amines by high-performance liquid chromatography-amperometric detection after derivatization with naphthalene-2,3-dicarboxaldehyde

A simple and sensitive liquid chromatographic method has been developed for the determination of low molecular weight aliphatic amines after their pre-column derivatization with naphthalene-2,3-dicarboxaldehyde (NDA). Derivatization conditions, including the NDA concentration, reaction pH and reaction time have been investigated for method optimization. The chromatographic separation of five amines was performed on ABZ PLUS column using mobile phase of methanol-water (80:20, v/v) at a flow rate of 0.2 mL min⁻¹. The detection was carried out with a 6 mm glassy carbon electrode at the applied potential of 0.7 V versus Ag/AgCl reference electrode. The detection limits were between 23.3 and 34.4 nmol L⁻¹ of amines with a sample injection volume of 2 μL. The present method was applied for the determination of aliphatic amines in lake water. The recovery ranged 52.2-127.9%. The RSD in analytes retention time was less than 0.3% and 2.4% for intra- and inter-day analyses, respectively. The RSD in peak area was below 5.8% for both intra-day and inter-day analyses. The total analysis was completed within 20 min.     

Development and Validation of a Stability-Indicating LC Method for Simultaneous Analysis of Aceclofenac and Paracetamol in Conventional Tablets and in Microsphere Formulations

A stability-indicating reversed-phase LC method for analysis of aceclofenac and paracetamol in tablets and in microsphere formulations has been developed and validated. The mobile phase was 80:20 (v/v) methanol–phosphate buffer (10 mM at pH 2.5 ± 0.02). UV detection was at 276 nm. The method was linear over the concentration ranges 16–24 and 80–120 μg mL^?1 for aceclofenac and paracetamol, respectively, with recovery in the range 100.9–102.22%. The limits of detection and quantitation for ACF were 0.0369 and 0.1120 μg mL^?1, respectively; those for PCM were 0.0631 and 0.1911 μg mL^?1, respectively.     

Nanowear studies in reversibly switchable polystyrene-poly(acrylic acid) mixed brushes

Wear studies were performed on polystyrene (PS)-poly(acrylic acid) (PAA) mixed polymer brushes and corresponding monobrushes in a dried state. The aim was to study the wear mechanism in polymer brush surfaces as well as to investigate the effect of switching of PS + PAA binary brush surfaces (on treatment with the selective solvents for the PS and PAA) on the wear process. Wear experiments were carried out using atomic force microscopy (AFM) under a controlled environment. The wear experiments were performed as a function of scan number using a sharp silicon nitride tip to induce the wear on the sample surfaces. The wear mechanism on different brush surfaces was influenced by molecular entanglement as well as adhesion and friction on the sample surface. The wear process on the PS monobrush surface treated with toluene took place via formation of the ripples. On the other hand, a typical wear mode observed on the PAA monobrushes was removal of the polymeric material from the surface. For the mixed brush surface treated with toluene (selective solvent for PS) where PS chains dominated the top of the sample surface, the typical wear mode observed was ripple formation similar to that observed for the PS monobrushes. However, when a mixed brush was treated with ethanol and pH 10 water so that PAA chains dominated the top layer, wear occurred via removal of material. The amount of wear on the surfaces increased with the number of scans. Furthermore, the load and scan velocity dependence of the wear process was also investigated. Wear on polymer brush surfaces increased on increasing the load and/or decreasing the scan speed. The present study shows that wear can be controlled/tuned using mixed responsive brushes.     

Carboxylic acid–pyridine supramolecular heterocatemer in a co-crystal

Robustness of carboxylic acid–pyridine supramolecular heterosynthon was examined in three 1:2 binary co-crystals of 4,4′-bipyridine with monocarboxylic acids, (4,4′-bipyridine)·(dl-hydroxyphenylacetic acid)₂, 1; (4,4′-bipyridine)_0.5·(4-bromonaphthalene-1-carboxylic acid), 2 and (4,4′-bipyridine)_0.5·(4-methylbenzoic acid), 3. All the three co-crystals form “two-component supermolecules” (consisting of one molecule of 4,4′-bipyridine and two molecules of the relevant carboxylic acid) stabilized through carboxylic acid–pyridine heterosynthons. Co-crystals 1 and 2 exhibits the expected carboxylic acid–pyridine dimer (heterodimer I) whereas co-crystal 3 forms a novel carboxylic acid–pyridine catemer (heterocatemer II).     

Tailoring porous silica films through supercritical carbon dioxide processing of fluorinated surfactant templates

The tailoring of porous silica thin films synthesized using perfluoroalkylpyridinium chloride surfactants as templating agents is achieved as a function of carbon dioxide processing conditions and surfactant tail length and branching. Well-ordered films with 2D hexagonal close-packed pore structure are obtained from sol-gel synthesis using the following cationic fluorinated surfactants as templates: 1-(3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluoro-octyl)pyridinium chloride (HFOPC), 1-(3,3,4,4,5,5,6,6,7,8,8,8-dodecafluoro-7-trifluoromethyl -octyl)pyridinium chloride (HFDoMePC), and 1-(3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,10-heptadecafluoro-decyl)pyridinium chloride (HFDePC). Processing the sol-gel film with CO2 (69-172 bar, 25 and 45 degrees C) immediately after coating results in significant increases in pore diameter relative to the unprocessed thin films (increasing from 20% to 80% depending on surfactant template and processing conditions). Pore expansion increases with CO2 processing pressure, surfactant tail length, and surfactant branching. The varying degree of CO2 induced expansion is attributed to the solvation of the "CO2-philic" fluorinated tail and is interpreted from interfacial behavior of HFOPC, HFDoMePC, and HFDePC at the CO2-water interface.     

NMR and computational studies of chiral discrimination by amylose tris(3,5-dimethylphenylcarbamate)

Proton NMR and simulations were combined to study the origin of chiral selectivity by a polysaccharide used in a commercial chromatographic stationary phase: amylose tris(3,5-dimethylphenylcarbamate). This material has unusually high enantioselectivity for p-O-tert-butyltyrosine allyl ester, which is activated by the presence of an acid. Proton NMR spectra agreed with the HPLC in showing that the l-enantiomer interacts much more strongly with the polysaccharide and that acidity switches on the selectivity. 2D NOESY spectra revealed which protons of each enantiomer and the polysaccharide were in proximity, and these spectra revealed folding of the l-enantiomer. Computations generated energy-minimized structures for the polysaccharide-enantiomer complexes, independently predicting folding of the l-enantiomer. Molecular dynamics simulations 2 ns in duration, repeated for three different energy-minimized structures, generated pair distribution functions that are in excellent agreement with the 2D NOESY spectra. The modeling studies revealed why acidity switches on chiral selectivity and minimally affects the chromatographic retention time of the unfavored d-enantiomer. The results comprise the first case of a chiral separation by a commercial polysaccharide stationary phase being explained using a combination of 2D NOESY and simulations, providing excellent agreement between experiment and computation and lending detailed molecular insight into enantioselectivity for this system.     

Nitroxyl radicals: electrochemical redox behaviour and structure-activity relationships

Comparative study of electrochemical redox behaviour of five different nitroxyl radicals leads to the direct correlation between one-electron redox potentials and group electronegativity of the beta-substituent on the ring. Beta-substituents with an electron-donating effect caused a negative shift in the one-electron oxidation and one-electron reduction potentials of the nitroxyl radicals. In a similar aspect, beta-substituents with an electron-withdrawing effect behaved oppositely.     

Influence of activation of Si29+ ion-implantation in GaAs on ohmic contact resistance and electrical performances of MESFETs

The active layers of Metal Semiconductor Field Effect Transistors (MESFETs) are obtained by Si²⁹⁺ ion implantation in GaAs. Implantation was done at 35 keV with a higher dose near the wafer surface for facilitating easier formation of ohmic contacts, and at 180 keV with a lower dose for obtaining the device channel. Post-implantation annealing was carried out in a rapid thermal processor for activating the implants. Very high activation levels of about 60% for the n⁺ GaAs layer, and 85% for the n-GaAs channel layer were achieved by annealing at 955 °C for 25 s. Activation was characterized using C–V profiling, secondary ion mass spectrometry and by electrical device data of fabricated MESFETs. We attempt an experimental correlation between the ohmic contact resistance (R _c) and activation of both the n⁺ and the channel layer. It was found that very high and simultaneous activation of the n⁺ and channel layers results in very low contact resistances. The conduction of source-drain current into the channel is easily facilitated due to reduction in the resistance of the transition region at the interface of n⁺-contact and n-channel layers.     

Activation of the Si-B linkage: copper-catalyzed addition of nucleophilic silicon to imines

Activation of the Si-B bond through copper-catalyzed transmetalation quickly developed into a practical method to generate Cu-Si reagents. These silicon nucleophiles cleanly add to aldehyde-derived imine electrophiles to form α-silylated amines in protic media, and no carbon-to-nitrogen Brook-type rearrangement of the intermediate anion is observed. Aside from electron-withdrawing groups at the imine nitrogen atom, for example, SO(2)Tol and P(O)Ph(2), previously delicate nitrogen substituents such as phenyl or benzhydryl are tolerated. The same protocol also allows the unprecedented addition to representative ketone-derived imines.