Temperature-triggered micellization of block copolymers on an ionic liquid surface

In situ neutron reflectivity was used to study thermally induced structural changes of the lamellae-forming polystyrene-block-poly(2-vinylpyridine) (PS-b-P2VP) block copolymer thin films floating on the surface of an ionic liquid (IL). The IL, 1-butyl-3-methylimidazolium trifluoromethanesulfonate, is a nonsolvent for PS and a temperature-tunable solvent for P2VP, and, as such, micellization can be induced at the air-IL interface by changing the temperature. Transmission electron microscopy and scanning force microscopy were used to investigate the resultant morphologies of the micellar films. It was found that highly ordered nanostructures consisting of spherical micelles with a PS core surrounded by a P2VP corona were produced. In addition, bilayer films of PS homopolymer on top of a PS-b-P2VP layer also underwent micellization with increasing temperature but the micellization was strongly dependent on the thickness of the PS and PS-b-P2VP layers.     

A highly selective fluorescent chemosensor for zinc ion and imaging application in living cells

A new 2,6-bis(5,6-dihydrobenzo[4,5]imidazo[1,2-c]quinazolin-6-yl)-4-methylphenol (1) serves as a highly selective and sensitive fluorescent probe for Zn(2+) in a HEPES buffer (50 mM, DMSO:water = 1:9 (v/v), pH = 7.2) at 25 °C. The increase in fluorescence in the presence of Zn(2+) is accounted for by the formation of dinuclear Zn(2+) complex [Zn(2)(C(35)H(25)N(6)O)(OH)(NO(3))(2)(H(2)O)] (2), characterized by X-ray crystallography. The fluorescence quantum yield of the chemosensor 1 is only 0.019, and it increases more than 12-fold (0.237) in the presence of 2 equiv of the zinc ion. Interestingly, the introduction of other metal ions causes the fluorescence intensity to be either unchanged or weakened. By incubation of cultured living cells (A375 and HT-29) with the chemosensor 1, intracellular Zn(2+) concentrations could be monitored through selective fluorescence chemosensing.     

Modeling of financial supply chain

The research work on supply-chain management has primarily focused on the study of materials flow and very little work has been done on the study of upstream flow of money. In this paper we study the flow of money in a supply chain from the viewpoint of a supply chain partner who receives money from the downstream partners and makes payments to the upstream partners. The objective is to schedule all payments within the constraints of the receipt of the money. A penalty is to be paid if payments are not made within the specified time. Any unused money in a given period can be invested to earn an interest. The problem is computationally complex and non-intuitive because of its dynamic nature. The incoming and outgoing monetary flows never stop and are sometimes unpredictable. For tractability purposes we first develop an integer programming model to represent the static problem, where monetary in-flows and out-flows are known before hand. We demonstrate that even the static problem is NP-Complete. First we develop a heuristic to solve this static problem. Next, the insights derived from the static problem analysis are used to develop two heuristics to solve the various level of dynamism of the problem. The performances of all these heuristics are measured and presented.     

Identification and estimation of parameters defining a class of hybrid systems

In this paper, we consider the problem of parameter estimation in an air brake system. In an air brake system, the pressure of air in the brake chamber and the displacement of the pushrod and their derivatives form a set of states that characterize the system. The position of a valve or mass flow rate of air is an input and the pressure is the measured variable or the output. The pressure acting on the pushrod of the brake chamber causes motion, and the mode in which the system operates depends on the displacement of the pushrod. The mode-dependent nature of the system is a result of different sets of spring compliances associated with the piston in different ranges of its displacement. The mode to mode transition in the air brake system is governed by a parameter which is the clearance between the brake pads and the drum. The clearance between the brake pads and the drum can vary due to a variety of factors — for example, brake pad wear or brake fade. In these applications, characterizing the transition from one mode to another requires a lot of constitutive assumptions, and it can be difficult to calibrate the parameters associated with the constitutive assumptions. We therefore treat the air brake system as a system in which the parameter governing the transition from one mode to another (clearance between the brake pads and the drum) is not known exactly. Clearly, this parameter dictates the time delay and lag between the command and delivery of the brake torque at the wheels and affects the stopping distance of the vehicles considerably. The problem of identification considered in this paper is as follows. Suppose that the pressure of the fluid were to be measured and that the motion of the piston is not measured. Is it possible to estimate the final displacement of the piston without knowing the parameters that govern the system to transition from one mode to another?     

Nano indentation measurements on nitrogen incorporated diamond-like carbon coatings

Nanoindentation testing was performed on nitrogen (N₂) incorporated diamond-like carbon (N-DLC) films and deposited using radio-frequency plasma-enhanced chemical vapor deposition technique, with varied percentage of nitrogen partial pressures of 0, 44.4, 66.6, and 76.1%. The values of nanohardness (H) and elastic modulus (E) of these films were obtained from 38 to 22 GPa and 462 to 330 GPa, respectively, as the partial pressure of N₂ increases from 0 to 76.1%. Further, these films were studied for % elastic recovery, ratio between residual displacement after load removal and displacement at maximum load (d _res/d _max), plastic deformation energy and plasticity index parameter (H/E). Both hardness per unit stress and plasticity index per unit stress were found to be maximum at N₂ partial pressure of 76.1%. X-ray photoelectron spectroscopy measurements confirmed the presence of N₂ in these films.     

Field emission, morphological and mechanical properties of variety of diamond-like carbon thin films

The effect of nitrogen incorporation and sandwich titanium and copper layers, on field emission, morphological and mechanical properties of diamond-like carbon (DLC) thin films is explored. The introduction of foreign element (N₂) and sandwich Cu and Ti layers changed the amorphous morphology to nanostructured, reduced the stress, enhanced the hardness (except N₂ incorporated DLC film) and improved the field emission (except Ti/DLC bilayer) of modified DLC films. The associated versatile electrical and mechanical properties of modified DLC film made it a material of great utility in the development of field emission display panels and also lead to its application as a hard and protective coating on cutting tools, automobile parts etc. It is important to mention that DLC-based electronic materials may replace currently used soft electronic materials (such as Si) due to their enhanced stability under high energy radiation.     

Preparation of a Cu(II)‐Immobilized Co‐polymer(CIC) for Effective Removal of Urea

The study describes the preparation of Cu(II)‐immobilized copolymer(CIC) under optimum conditions for the effective removal of urea. The copolymeric hydrogels, synthesized by free‐radical aqueous copolymerization of monomers acrylamide and sodium acrylate, have been analyzed for their Cu(II) uptake behavior. The sorption of Cu(II) into polymer follows a Langmuir–type pattern and amount sorbed depends upon the composition of copolymeric gels, presence of other co‐ions in the solution, pH of the solution, initial concentration of sorbate, degree of crosslinking of the copolymeric hydrogel, temperature of the solution etc. In the preliminary study, the Cu(II) immobilized co‐polymer(CIC) sorbent demonstrated a fair tendency to remove urea from aqueous solutions.     

Synthesis and Insecticidal Activity of Novel Dithiophosphonates

A new series of dithiophosphonates has been synthesized using cycloiminium halides of pyridine, thiazole, and benzothiazole as starting material, dichlorophenylphosphine as phosphorylating agent, and 2-propanethiol as nucleophilic substituent. These compounds were tested for their insecticidal activity against a polyphagous insect plutella xylostella and found to exhibit potent pesticidal activity.     

A New Family of Chalcogen Bearing Macrocycles: Synthesis and Characterization of N 4 O 2 E 2 (E = Se,Te) Type Compounds

A new series of 24- and 28-membered macrocyclic systems associated with "hard" (N and O) and "soft" (Se or Te) donor atoms have been developed via template free (2 + 2) condensation reactions of bis(aminoalkyl)selenides/tellurides, {NH 2 (CH 2 ) n } 2 E (E = Se, Te; n = 2,3) with 2,6-diacetyl-4-methylphenol. A macroacycle, Se{(CH 2 ) 2 N=C(CH 3 )C 6 H 2 (OH)(CH 3 )C=O(CH 3 )} 2 , has also been obtained. These compounds have been characterized by ESMS, IR, and 1 H, 13 C, and 77 Se NMR spectroscopy.