Electric field and temperature dependence of hole mobility in electroluminescent PDY 132 polymer thin films

The current density–voltage ($J\text{–}V$) behavior of polymer PDY 132 thin films has been investigated in hole-only device configuration, viz., ITO/poly(ethylene-dioxthiophene):polystyrenesulphonate (PEDOT:PSS)/PDY 132/Au, as a function of polymer (PDY) film thickness (150 nm and 200 nm) and temperature (290–90 K). Hole current density was found to follow two distinct modes of conduction, (i) low electric field region I: ohmic conduction where slope $～1$, and (ii) intermediate and high electric field region II: non ohmic conduction where slope $～2$. Region I has been attributed to the transport of intrinsic background charge carriers while region II has been found to be governed by space charge limited currents (SCLC) with hole mobility strongly dependent on electric field and temperature. The respective hole transport parameters determined from the SCLC regime, ${\mu }_{p0}$ is $3.7\times 10^{?3}{m}^2/Vs$, ${\mu }_p(0,T)$ is $3.7\times 10^{?8}{m}^2/Vs$, and zero field activation energy (${\Delta }_0$) of 0.48 eV is obtained.     

A parameter-uniform scheme for singularly perturbed partial differential equations with a time lag

A numerical scheme for a class of singularly perturbed delay parabolic partial differential equations which has wide applications in the various branches of science and engineering is suggested. The solution of these problems exhibits a parabolic boundary layer on the lateral side of the rectangular domain which continuously depends on the perturbation parameter. For the small perturbation parameter, the standard numerical schemes for the solution of these problems fail to resolve the boundary layer(s) and the oscillations occur near the boundary layer. Thus, in this paper to resolve the boundary layer the extended cubic B-spline basis functions consisting of a free parameter λ are used on a fitted-mesh. The extended B-splines are the extension of classical B-splines. To find the best value of λ the optimization technique is adopted. The extended cubic B-splines are an advantage over the classical B-splines as for some optimized value of λ the solution obtained by the extended B-splines is better than the solution obtained by classical B-splines. The method is shown to be first-order accurate in t and almost the second-order accurate in x. It is also shown that this method is better than some existing methods. Several test problems are encountered to validate the theoretical results.     

Orientational order parameter estimated from molecular polarizabilities – an optical study

An optical study of N-(p-n-alkyloxybenzylidene)-p-n-butyloxyanilines, nO.O4 compounds with the alkoxy chain number n?=?1, 3, 6, 7, and 10 has been carried out by measuring the refractive indices using modified spectrometer and direct measurement of birefringence employing the Newton's rings method. Further, the molecular polarizability anisotropies are evaluated using Lippincott δ-function model, the molecular vibration method, Haller's extrapolation method, and scaling factor method. The molecular polarizabilities α _e and α ₀ are calculated using Vuk's isotropic and Neugebauer anisotropic local field models. The order parameter S is estimated by employing the molecular polarizability values determined from experimental refractive indices and density data and the polarizability anisotropy values. Further, the order parameter S is also obtained directly from the birefringence data. A comparison has been carried out among the order parameter obtained from different ways and the results are compared with the body of the data available in the literature.     

Study of crystalline perfection and thermal analysis of zinc cadmium thiocyanate single crystals grown in silica gel

Zinc cadmium thiocyanate ZnCd(SCN)₄ abbreviated as ZCTC is a bimetallic thiocyanate complex that exhibits excellent nonlinear optical property. Single crystals of ZCTC have been grown in silica gel by the process of diffusion. Colorless transparent crystals of size 12 mm x 2 mm x 1.3 mm have been obtained. High resolution X‐ray diffraction study was carried out to investigate the crystalline perfection of the grown crystal and the quality of the crystal was found to be quite good. Thermal stability of the grown crystal was investigated by thermogravimetric and differential thermal analyses. Fourier Transform Infrared spectrum was recorded to confirm the functional groups. Microhardness of the crystal is also studied. Being a nonlinear optical material, a comparative study of its second harmonic generation efficiency with urea has been made. (© 2007 WILEY ‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Nitrosubstituted hydroxamate ligands in new triphenyltin(IV) complexes as prospective antimicrobial agents

New triphenyltin(IV) hydroxamate complexes, [Ph₃Sn(4-NO₂CnH)] and [Ph₃Sn(4-NO₂BzH)] have been synthesized by the reactions of Ph₃SnCl with potassium 4-nitrocinnamo hydroxamate [4-NO₂C₆H₄CHCHCONHOK] (KHL¹) and potassium 4-nitro benzohydroxamate [4-NO₂C₆H4CONHOK] (KHL²). The complexes were synthesized in 1:1 molar ratio in MeOH?+?C₆H₆ and characterized by physicochemical and IR, ¹H NMR, and mass spectrometry. The bidentate hydroxamate involving bonding through carbonyl and hydroxamic oxygen (O, O coordination) has been inferred from IR spectra. The electrochemical behavior of complexes has been analyzed. Quasi-irreversible two electron metal-centered cathodic process of type Sn^IV/Sn^II redox couple was indicated by cyclic voltammetric technique. The thermal behavior of 1 and 2 studied by TGA has shown continuous decomposition to yield Sn + 0.5SnO₂ and SnO₂ as final residues. The in vitro antimicrobial activity assays of 1 and 2 against pathogenic Gram-positive bacteria (Bacillus subtilis and Staphylococcus aureus), Gram-negative bacteria (Salmonella typhi and Pseudomonas aeruginosa), and fungi (Aspergillus fumigatus and Alternaria alternata) were done by MIC method. The complexes have exhibited appreciable antimicrobial activity relative to the respective standard Gentamycin and Nystatin drugs.     

Synthesis,docking and ADME prediction of novel 1,2,3-triazole-tethered coumarin derivatives as potential neuroprotective agents

Research on Chemical Intermediates - In an attempt to find potential neuroprotective agents, a series of novel 3-(1-((1-(substituted phenyl)-1H-1,2,3-triazol-4-yl) methoxyimino)...     

Studies towards iodine-catalyzed dehydrative-cycloisomerization of pent-4-yne-1,2-diols to di- and tri-substituted furans

An efficient and single-step iodine catalyzed and metal-free synthesis of di and tri-substituted 2-methylfuran derivatives were achieved from 1-popargyl-1,2-diols. Stereospecific synthesis of starting 1,2-diols was achieved by indium mediated Barbier type propargylation on corresponding keto-alcohols or by sodium borohydride mediated reduction of 2-hydroxy-2-propargyl ketones. The furan synthesis proceeded through iodine mediated 5-exo-trig cyclization, dehydration and reductive deiodination. The method was applied to the synthesis of 2-methylfuran fused to phenanthrene, pyrene and acenaphthylene rings.     

HClO4 x SiO2 catalysed synthesis of alkyl 3-deoxy-hex-2-enopyranosides from 2-hydroxy glucal ester: application in the synthesis of a cis-fused bicyclic ether and a 4-amino-C-glucoside

A variety of alcohols react with 2,3,4,6-tetra-O-acetyl-1,5-anhydro-D-arabino-hex-1-enopyranose 1 in the presence of a catalytic amount of HClO(4) supported on silica gel to give the corresponding alkyl 3-deoxy-hex-2-enopyranosides 2 in high yield, with short reaction times (10-45 mins) and good alpha-selectivity. Work-up merely involves filtration of the reagent, followed by chromatographic purification of the crude product. This methodology has also been employed in the synthesis of a bicyclic ether, a useful precursor for cyclic polyethers, and a 4-amino-C-glucoside.     

Characterization of the photochromic pigments in red fluorescent proteins purified from the gut juice of the silkworm Bombyx mori L

Multiple forms of red fluorescent proteins (RFPs) were observed in the gut juice of the silkworm, Bombyx mori L. It is to be noted that only one RFP band is reported in the literature so far. However, we report here three electrophoretically separated RFPs (A, B and C) found to be heterogeneous with respect to their components, namely the protein part and the fluorescent tetrapyrrole pigment moiety. Of the three RFPs, band C was found to be a glycoprotein. The absorption extinction coefficients and fluorescence quantum yields of the three RFPs were estimated. Further, this is the first communication demonstrating the presence of three different chlorophyll derivatives associated with the three different RFPs. The pigments were analyzed by thin layer chromatography followed by their elution to characterize the pigments by spectrophotometric and spectrofluorometric methods. Spectral characteristics have led to the identification of monovinyl chlorophyllide a, divinyl protochlorophyllide a and monovinyl pheophytin a as being associated with RFP bands A, B and C, respectively. These three purified RFPs can serve as the source of the three pigments as the standards.     

Miniaturized surface engineered technologies for multiplex biosensing devices

The demand for quick, accurate, and affordable point-of-care (POC) devices increases with the advancement in the dimensions of nanotechnology and digital interfaces (Internet of Things). The future of diagnostic requires the platform which can provide us the following benefits i. e., on-site detection, qualitative as well as quantitative analysis, easy to use, portable, low sample requirement, cost-effective, and have multiplexing proficiency. Multiplex biosensing platforms (MBPs) have the above following advantages so are going to be mostly used in various healthcare applications in near future. MBPs have the potential to fulfill the ‘ASSURED’ criteria specified by the World Health Organization (WHO) for remote-limited settings. This review paper focuses on miniaturized platforms that have multiplexing benefits for the bioanalysis of different clinical samples related to various healthcare applications. In addition to this, screening of pesticides, antibiotics, and hazardous metal ions with these surface-engineered devices has also been accounted in food and environmental samples. Some of the advanced techniques including microfluidics (Lab-on-a-chip), wearable smart devices, and CRISPR/Cas system for multiplexing applications are briefly described here. Furthermore, various needs, challenges, and prospects in commercializing these multiplexed surface-engineered devices have been discussed in this review.