Novel Copolymer of Diisopropyl Fumarate and Benzyl Acrylate Synthesized Under Microwave Energy and Quasielastic Light Scattering Measurements

Microwave assisted free radical copolymerization of diisopropyl fumarate (DIPF) and benzyl acrylate (BzA) with different copolymer compositions was performed using benzoyl peroxide as initiator. The effect of the reaction conditions on the macromolecular characteristics, monomer reactivity ratio and copolymer properties were studied. The monomer conversion and average molecular weights increase with the content of BzA units in the copolymer. The copolymers were characterized by IR, ¹H and ¹³C-NMR spectroscopies and the molecular weights were analyzed with size exclusion chromatography (SEC). The reactivity ratios obtained from an extended Kelen-Tüdös method under microwave irradiations are a factor which is double than those obtained by thermal copolymerization. The product r₁r₂ = 0.152 suggests a preference of both propagating macroradicals toward consecutive homopolymerization. The hydrodynamic and polydispersity size were measured in ethylacetate, tetrahydrofuran and methylethylketone with a quasi-elastic light scattering (QELS) technique showing that the quality of the solvents increases in the order: EA < THF < MEK.     

Pyrolysis study of hydrophobic tholins By TG-MS, TG, DTA and DSC methods

This study presents the thermogravimetry (TG) of hydrophobic tholins, obtained from different simulation experiments of prebiotic synthesis carried out in a CH₄/N₂/H₂ atmosphere with spark discharge activation of aqueous aerosols and liquid water. Differential thermal analysis and differential scanning calorimetry were also used to evaluate the thermal behaviour of these complex organic compounds that could play an important role in prebiotic chemistry. A coupled thermogravimetry-mass spectrometry system allowed us to analyse the principal volatile thermal decomposition and fragmentation products of the hydrophobic tholins under dynamic conditions and an inert atmosphere. During their thermal degradation, which occurs in two stages, a wide variety of hydrocarbon products including methane, vinyl monomers (such as ethylene and propylene), acetylene, oligomers, and some other unknown compounds are found. Besides, a thermally stable structure is present (graphitic structure) in these particular organic substances. Finally, data collected from TG experiments in an oxidative atmosphere showed significant differences at temperatures above 240 °C. According to these results, the different techniques of thermal analysis here applied have proved to be an adequate methodology for the study and characterization of these complex systems, structures of which remain controversial even in these days.     

Disposable amperometric magnetoimmunosensor for the sensitive detection of the cardiac biomarker amino-terminal pro-B-type natriuretic peptide in human serum

A novel amperometric magnetoimmunosensor using an indirect competitive format is developed for the sensitive detection of the amino-terminal pro-B-type natriuretic peptide (NT-proBNP). The immunosensor design involves the covalent immobilization of the antigen onto carboxylic-modified magnetic beads (HOOC-MBs) activated with N-(3-dimethylaminopropyl)-N′-ethylcarbodiimide (EDC) and N-hydroxysulfosuccinimide (sulfo-NHS), and further incubation in a mixture solution containing variable concentrations of the antigen and a fixed concentration of an HRP-labeled detection antibody. Accordingly, the target NT-proBNP in the sample and that immobilized on the MBs compete for binding to a fixed amount of the specific HRP-labeled secondary antibody. The immunoconjugate-bearing MBs are captured by a magnet placed under the surface of a disposable gold screen-printed electrode (Au/SPE). The amperometric responses measured at –0.10 V (vs. a Ag pseudo-reference electrode), upon addition of 3,3′,5,5′-tetramethylbenzidine (TMB) as electron transfer mediator and H₂O₂ as the enzyme substrate, are used to monitor the affinity reaction. The developed magnetoimmunosensor provides attractive analytical characteristics in 10-times diluted human serum samples, exhibiting a linear range of clinical usefulness (0.12–42.9 ng mL⁻¹) and a detection limit of 0.02 ng mL⁻¹, which can be used in clinical diagnosis of chronic heart failure in the elderly and for classifying patients at risk of death after heart transplantation. The magnetoimmunosensor was successfully applied to the analysis of spiked human serum samples.     

α,α-Dialkylglycines obtained by solid phase Ugi reaction performed over isocyanide functionalized resins

The multicomponent Ugi reaction is a straightforward method that can be used for the synthesis of highly hindered C-tetrasubstituted amino acids by reacting an amine, a ketone or aldehyde, a carboxylic acid and an isocyanide. In the present work, the synthesis of several α,α-dialkylglycines (α,α-diethylglycine, Deg; α,α-dipropylglycine, Dpg; 1-amino-1-cyclohexanecarboxylic acid, Ac₆c) was achieved by solid phase Ugi reaction using resins functionalized with the isocyanide group. Since no resins with these features were available commercially, the functionalization of an aminomethylated resin started by the use of glycine (Gly), β-alanine (β-Ala) and γ-aminobutyric acid (GABA) as spacers. After spacer N-formylation, followed by dehydration, isocyanide functionalised resins were obtained. The resins were then used in solid phase Ugi reaction, using phenylacetic acid as the acid component, 4-methoxybenzylamine as the amine component and different ketones, to afford the desired N-acylated α,α-dialkylglycines in good overall yields (60–80%), after acidolytic cleavage from the resin, thus proving the feasibility of this approach.     

Ammonium Determination in Water Samples by Using Opa-Nac Reagent: A Comparative Study with Nessler and Ammonium Selective Electrode Methods

A selective and sensitive method based on the ammonium derivatisation with o -phthaldialdehyde (OPA) and N -acetyl-cysteine (NAC) has been developed for ammonium determination in real water samples. The proposed procedure has been compared with ammonium reference methods such as Nessler reagent method and ammonium selective electrode. All procedures have been chemometrically tested and compared in terms of the main analytical properties. These procedures have been used to determine ammonium in unknown water samples. The OPA-NAC reagent method does not present any systematic error (proportional or constant), while Nessler reagent presents both of them for some samples assayed. The ammonium selective electrode is free of corrigible systematic errors, however presents amine interference. The OPA-NAC ammonium method is able to achieve a detection limit (LOD) of 0.07 mg/L in the sample, with a linear dynamic range up to 1.4 mg/L of ammonium.     

The role of nanocellulose fibers, starch and chitosan on multipolysaccharide based films

Thin nanocomposite films of thermoplastic starch, chitosan and cellulose nanofibers (bacterial cellulose or nanofibrillated cellulose) were prepared for the first time by solvent casting of water based suspensions of the three polysaccharides. The role of the different bioploymers on the final properties (thermal stability, transparency, mechanical performance and antimicrobial activity) of the films was related with their intrinsic features, contents and synergic effects resulting from the establishment of interactions between them. Thermoplastic starch displays an important role on the thermal stability of the films because it is the most stable polysaccharide; however it has a negative impact on the mechanical performance and transparency of the films. The addition of chitosan improves considerably the transparency (up to 50 % transmittance for 50 % of chitosan, in respect to the amount of starch), mechanical performance and antimicrobial properties (at least 25 % of chitosan and no more than 10 % of cellulose nanofibers are required to observe bacteriostatic or bactericidal activity) but decrease their thermal stability. The incorporation of cellulose nanofibers had the strongest positive impact on the mechanical properties of the materials (increments of up to 15 and 30 MPa on the Young′s modulus and Tensile strength, respectively, for films with 20 % of BC or NFC). Nonetheless, the impact in thermal stability and mechanical performance of the films, promoted by the addition of chitosan and cellulose nanofibres, respectively, was higher than the expected considering their percentage contents certainly because of the establishment of strong and complex interactions between the three polysaccharides.     

Baroque glass mosaics from the Capela de São João Baptista (Chapel of Saint John the Baptist,Lisbon): unveiling the glassmaking records

For the first time, 18th‐century glass mosaics from the Capela de São João Baptista (Chapel of St. John the Baptist, Lisbon) were analysed by Raman microscopy (RM). This masterpiece in baroque mosaic art had one of its major contributors the most famous glassmaker in Rome, Alessio Mattioli. Mattioli was celebrated because of the opacity of his mosaics and the astonishing number of hues he was able to produce for mosaic decorating Saint Peter's Basilica in Rome. This study had two goals in mind: (1) characterising the materials involved in the manufacture of these glass mosaics and (2) lengthening the understanding of what was left of Mattioli's glassmaking records. As expected the mosaics presented a high ratio of crystalline phases, making RM the ideal technique for non‐destructive analysis. The mosaics contained a white ‘background’ or opacifier added identified as Ca₂Sb₂O₇. The yellow tesserae are opacified with lead antimonate (Pb₂Sb₂O₇) and ternary oxides, structures related to lead antimonate but with other ions entering the position of Sb⁴⁺ (namely Sn⁴⁺). Those ternary oxides are pervasive in most colours, admixed with other colorants. The red, orange, pink and brown colours were accomplished with cuprous oxide (Cu₂O) and admixed with a ternary oxide to create the latter three colours. The red copper‐based colours were made according to the procedure to make a ruby copper glass and with the exception of the red colour; all mosaics exhibited a dark layer on each side of the mosaic, named scorzetta. This layer is the outcome of an oxidation reaction because of a quick cooling process and is composed of CuO. Finally the blue and green colours are accomplished with cobalt oxide and copper oxide, respectively, and the purple/black colour with manganese oxide. Copyright © 2015 John Wiley & Sons, Ltd.     

Shape-Adaptability and Redox-Switching Properties of a Di-Gold Metallotweezer

The use of a carbazolyl-connected di-gold(I) metallotweezer for the encapsulation of several electron-poor organic substrates, and a planar Au(III) complex containing a CNC pincer ligand, is described. The binding affinity of the receptor depends on the electron-deficient character of the planar guest, with larger association constants found for the more electron-poor guests. The X-ray diffraction molecular structures of two host:guest adducts show that the host approaches its arms in order to facilitate the optimum interaction with the surface of the planar guests, in a clear example of an guest-induced fit conformational arrangement. The electrochemical studies of the encapsulation of N,N’-dimethyl-naphthalenetetracarboxy diimide (NTCDI) show that the redox active guest is released from the receptor upon one electron reduction, thus constituting an example of redox-switchable binding.     

How Aromatic Fluorination Exchanges the Interaction Role of Pyridine with Carbonyl Compounds: The Formaldehyde Adduct

The rotational spectrum of the weakly bound complex pentafluoropyridine⋅⋅⋅formaldehyde has been investigated using Fourier transform microwave spectroscopy. From the analysis of the rotational parameters of the parent species and of the ¹³C and ¹⁵N isotopologues, the structural arrangement of the adduct has been unambiguously established. The full ring fluorination of pyridine has a dramatic effect on its binding properties: It alters the electron density distribution at the π-cloud of pyridine creating a π-hole and changing its electron donor-acceptor capabilities. In the complex, formaldehyde lies above the aromatic ring with one of the oxygen lone pairs, as conventionally envisaged, pointing toward its centre. This lone pair⋅⋅⋅π-hole interaction, reinforced by a weak C−H⋅⋅⋅N interaction, indicates an exchange of the electron-acceptor roles of both molecules when compared to the pyridine⋅⋅⋅formaldehyde adduct. Tunnelling doublets due to the internal rotation of formaldehyde have also been observed and analysed leading to a discussion on the competition between lone pair⋅⋅⋅π-hole and π⋅⋅⋅π stacking interactions.